Y3+掺杂BST/ZrO2复合薄膜的制备及介电性能研究

运用溶胶-凝胶法在Si/SiO2/Ti/Pt基底上制备了掺杂不同量的Y3+的单层Ba0.65Sr0.35TiO3 (BST)薄膜和并联结构的BST/ZrO2复合薄膜.研究发现:当BST溶胶中掺入了适量的Y3+后,制备的单层BST的表面形貌得到改善,介电性能提高;掺杂的Y3+为1mol;时单层BST薄膜介电性能最佳,介电常数为400.53;介电损耗为0.0125.BST/ZrO2复合薄膜的电容值相对于单层BST薄膜得到明显提高,当烧结温度为750℃时,BST/ZrO2复合薄膜综合介电性能最佳,介电常数790.12;介电损耗达到0.051.     

NiO/rGO的溶剂热合成以及作为高循环稳定性超级电容器电极材料的性能表征

通过简单的溶剂热法以及其后续热处理过程,制备了NiO纳米花和NiO/还原氧化石墨烯（rGO）复合物。 在NiO/rGO复合物中,rGO作为基底生长NiO,与此同时,NiO则有效的避免了rGO的团聚。 采用热重分析(TG)、场发射扫描电子显微镜(FE-SEM)和X射线衍射对样品的成分、形貌和结构进行了表征。 NiO/rGO复合物（NiO和rGO的质量比为82.7∶17.3）电极呈现优异的电化学性能。 在1 A/g时,初始比电容为514.9 F/g,当材料完全活化后,其比电容高达600 F/g。 同时,在电流密度为10 A/g时,相比于1 A/g时的比电容保持率为83.5%。 此外,该电极材料具有非常优异的循环稳定性,6000次循环后电容衰减率为7.4%。 表明所制备的复合物是一种有应用价值的超级电容器电极材料。     

谱有限元模拟正交各向异性黏弹性材料中导波传播特性

研究了导波在正交各向异性黏弹性复合板中传播的色散特性、波结构及功率流密度。基于二维平面运动方程,采用谱有限元方法得到了导波色散的特征方程。分析了正交各向异性黏弹性板中各向异性和黏性对能量速度和波结构的影响,以及基底对导波功率流密度的影响。数值研究结果表明:导波沿纤维方向传播的能量速度大,材料的黏性对速度影响较小,但会减小波结构的幅度;在高频时,基底的存在使两个基本模态的功率流密度分别集中到波导的上下表面,形成弱色散、高衰减及无色散、零衰减的表面波。数值模拟结果为导波用于复合材料定量无损检测和性能评价提供理论依据。      

Determination and Temperature Dependence of Plateau Modulus for Polymerization of Propylene to Isotactic Polypropylene with Ultra-high Molecular Weight under Catalysis of Ziegler-Natta Catalyst

The viscoelastic behavior of isotactic polypropylene with ultra-high molecular weight (UHPPH) and broad molecular weight distribution(MWD), produced in the presence of Ziegler-Natta catalyst, was investigated by means of oscillatory rheometry at 180 and 200 ℃, whose loss modulus(G") plots at 180 and 200 ℃versus the natural logarithm of angular frequency(ω) present a pronounced maximum at 34.35 and 69.21 rad/s, respectively, and do not show a maximum peak at 0. 01-100 rad/s for Ziegler-Natta catalyzing ethylenepropylene random copolymerization (PPR) with a conventional molecular weight and broad MWD. The fact indicates that the high molecular weight is responsible for a maximum peak of G"(ω) vs. lnω curves for UHPPH. This makes it possible to determine the plateau modulus (G0N) of UHPPH from a certain experimental temperature G"(ω) curve directly. For UHPPH, the G0N determined to be 4. 28×105 and 3. 62×105 Pa at 180and 200 ℃, respectively, decreases with the increase of temperature and is independent of the molecular weight, which directly confirms reputation theoretical prediction that the G0N has no relation to the molecular weight.     

A New Approach to Inducing Silicon Tethered Ring-closing Metathesis Reactions

IntroductionGrubbs catalyst bis(tricyclohexylphosphine)benzylidene ruthenium( ) dichloride1 can be usedin a variety of ring- closing metathesis (RCM )reactions,cross metathesis(CM) reactions andring- opening metathesis polymerization(ROMP) [1— 4 ] .It remains metathetically active inthe presence of a variety of functional groups,suchas carbonyls,alcohols,and amides[1] .The use ofcatalyst1 in the synthesis has drawn more andmore attention[5— 13] . However,this catalyst is veryexpensive,an…     

Purification of Single-walled Carbon Nanotubes Grown by a Chemical Vapour Deposition (CVD) Method

ＩｎｔｒｏｄｕｃｔｉｏｎＳｉｎｇｌｅ ｗａｌｌｅｄｃａｒｂｏｎｎａｎｏｔｕｂｅｓ(ＳＷＮＴｓ)ｈａｖｅｂｅｅｎｓｙｎｔｈｅｓｉｓｅｄｂｙｕｓｉｎｇｖａｒｉｏｕｓｍｅｔｈｏｄｓ[1— 3] ａｎｄｔｈｅｃｈｅｍｉｃａｌｖａｐｏｕｒｄｅｐｏｓｉｔｉｏｎ (ＣＶＤ )ｍｅｔｈｏｄｈａｓｂｅｅｎｃｏｎｓｉｄｅｒｅｄａｓａ ｐｒｏｍｉｓｉｎｇｍｅｔｈｏｄｔｏ ｐｒｏｄｕｃｅＳＷＮＴｓｏｎａｎｉｎｄｕｓｔｒｉａｌｓｃａｌｅ[3— 5] .Ｈｏｗｅｖｅｒ ,ａｌｌｔｈｅＳＷＮＴ ｐｒｏｄｕｃｔｓｓｙｎｔｈｅｓｉｓｅｄｔｏｄａｔｅｃｏ…     

基于细观混凝土模型的时间逆转损伤成像方法

提出了一种针对混凝土结构损伤检测的时间逆转损伤成像方法.以检测混凝土结构中与骨料尺寸相近的微小损伤为目的,引入细观混凝土随机骨料模型,该模型将混凝土结构视为由水泥浆基底、骨料及粘接层组成的三相复合材料,基于Monte Carlo随机样本原理并结合真实试件的骨料级配曲线建立.在数值模拟分析中,将生成含损伤的细观模型导入有限元分析软件进行超声波场模拟,同时采用自适应性强的时间逆转模型(time reversed model,TRM)进行损伤定位.TRM分为正向检测和逆时成像两个部分:正向检测过程得到包含损伤的一系列散射回波信号,从数值角度进行时间反演并作为逆时过程的输入信号;逆时成像过程选用等效弹性参数模型,几何尺寸与随机骨料模型相同,时反信号在相应几何位置同时加载形成时反波场,时反波场在损伤位置会发生干涉叠加从而导致能量峰值的出现,通过确定干涉峰值时刻,并获取该时刻对应原始波场以及小波变换能量场完成成像.与原始数据波场图相比,小波变换处理成像结果消除了杂波干扰,成像结果更加清晰.进一步对等效弹性参数的取值进行讨论,并且在骨料尺寸范围内调整损伤大小,结果显示成像结果匹配度高,对于非均质混凝土结构的损伤检测能很好满足损伤定位需求.由此证明,时间逆转成像方法对于具有复杂结构的混凝土材料的损伤检测具有较好的适用性.     

石墨烯/钛酸锶钡/聚偏氟乙烯复合薄膜介电性能研究

首先制备了硅烷偶联剂改性后的石墨烯和钛酸锶钡粉体,然后采用溶液混合法制备了石墨烯/钛酸锶钡/聚偏氟乙烯薄膜,并且对复合薄膜的微观结构、介电性能和热稳定性进行测定和分析.结果表明:硅烷偶联剂成功接枝到石墨烯和钛酸锶钡粉体表面,石墨烯和钛酸锶钡粉体能够较好的分散在聚偏氟乙烯基体中,石墨烯的加入可以大幅度提高材料的介电性能.在石墨烯质量分数为4.06;时,复合薄膜的介电常数达到515,介电损耗为0.6.在质量分数4.14;时发生了渗流现象,介电常数达到1500,介电损耗也达到了5左右.石墨烯的加人大幅度提升了复合材料的介电性能,并且在常用温度范围内具有良好的温度稳定性.     

Cosolvent Effect on the Tautomerism of Ethyl Acetoacetate in Supercritical CO_2

There are some unique advantages for chemical reactions in SCFs. For example, reaction rates, yields, and selectivity can be tuned by pressure or small amount of cosolvent. SCFs can be used to replace environmentally undesirable solvents. It is not surprised that in recent years the use of SCFs as solvents for chemical reaction media has received much attention. However, mechanism for the effect of pressure and cosolvents on chemical reactions is not very clear. Tautomeric reactions are id…     

Synthesis and Structure of E-2-(2,4,6-tri tert butylphenylphosphinyl)-2-〔N-(tert-butyldimethylsilyl)-N-(p-chrolophenyl)〕amino-1-(2,4,6-tri tert-butyl-phenyl)phosphacthylene

1　INTRODUCTIONItwaswellknown thatelementsofthesecondary and higherrow are in generaldifficulty to form multiplebondsin which apπ hybridized stateisinvolved〔1〕.Thus,simple compounds containing multiple phosphorus carbon bonds,such as methyl dynephosphine( HC≡P) 〔2 - 3〕 and methylenephosphine( H2 C=PH〔4〕,are notstableat room temperature.Three methods to stabilize compounds containing double ormultiple bond involving phosphorusatom in the pπ hybridized state are often used.The f…