Cu2O/TiO2-Bi2WO6三元复合催化剂的制备及光催化性能研究

采用水热法制备花状Bi2 WO6,并利用超声分散法制备了Cu2 O/TiO2-Bi2 WO6复合光催化剂,通过FESEM、XRD、XPS、FI-IR、UV-vis DRS和PL对光催化剂进行了分析和表征.表征结果证明:花状Bi2 WO6表面负载着碎片状的TiO2和立方体Cu2 O形成Cu2 O/TiO2-Bi2 WO6复合光催化剂;以短链脂肪酸(SCFAs)为牺牲剂,考察复合光催化剂的光催化产生氢气和烷烃的性能.实验结果表明:Cu2 O/TiO2-Bi2 WO6复合光催化剂以乙酸为牺牲剂,主要产氢气和甲烷,降解率高达91.82;;以丙酸为牺牲剂,产物主要是乙烷和丁烷,降解率高达90.70;;以丁酸为牺牲剂,除了氢气,甲烷,乙烷,丙烷,丁烷外,气体产物还含有一定量的戊烷,其降解率高达91.50;.结合反应液中间产物的成分进行检测,由此推断出光催化反应的可能机理.     

纳米W粉冲击烧结的分子动力学模拟

粉末冲击烧结是制备高品质W的一种有效方法，而分子动力学方法在尺度极小、过程迅速的数值模拟上有着独特的优势。因此运用分子动力学方法，结合W的嵌入原子势，对常温下的纳米W粉末的冲击烧结过程进行模拟，得到颗粒微观压实过程图、体系速度分布云图、p-U_p、T-U_p、T-p曲线以及径向分布函数。研究了不同颗粒速度及产生的射流对纳米W粉末冲击烧结影响，分析了微观冲击烧结机理。结果表明，低速冲击条件下（500 m/s以下），纳米颗粒无法压实。高速条件下（1 000 m/s及以上），颗粒能获得致密化很高的压实。颗粒间的相互挤压造成的高应力使颗粒表面的原子发生流动变形，原子向颗粒间空隙流动，形成压实。颗粒间产生的射流以及高速冲击导致的颗粒熔化，均促进烧结获得致密度更高的烧结体。     

Surface passivation in n-type silicon and its application in silicon drift detector

Based on the surface passivation of n-type silicon in a silicon drift detector(SDD), we propose a new passivation structure of SiO2/Al2O3/SiO2 passivation stacks. Since the SiO2 formed by the nitric-acid-oxidation-of-silicon(NAOS)method has good compactness and simple process, the first layer film is formed by the NAOS method. The Al2O3 film is also introduced into the passivation stacks owing to exceptional advantages such as good interface characteristic and simple process. In addition, for requirements of thickness and deposition temperature, the third layer of the SiO2 film is deposited by plasma enhanced chemical vapor deposition(PECVD). The deposition of the SiO2 film by PECVD is a low-temperature process and has a high deposition rate, which causes little damage to the device and makes the SiO2 film very suitable for serving as the third passivation layer. The passivation approach of stacks can saturate dangling bonds at the interface between stacks and the silicon substrate, and provide positive charge to optimize the field passivation of the n-type substrate.The passivation method ultimately achieves a good combination of chemical and field passivations. Experimental results show that with the passivation structure of SiO2/Al2O3/SiO2, the final minority carrier lifetime reaches 5223 μs at injection of 5×10¹⁵ cm^-3. When it is applied to the passivation of SDD, the leakage current is reduced to the order of nA.     

Salt effect on molecular orientation at air/liquid methanol interface

The salt effects on molecular orientation at air/liquid methanol interface were investigated by the polarization-dependent sum frequency generation vibrational spectroscopy(SFG-VS). We clarified that the average tilting angle of the methyl group to be u = 308 58 at the air/pure methanol surface assuming a d-function orientational distribution. Upon the addition of 3 mol/L Na I, the methyl group tilts further away from the surface normal with a new u = 418 38. This orientational change does not explain the enhancement of the SFG-VS intensities when adding Na I, implying the number density of the methanol molecules with a net polar ordering in the surface region also changed with the Na I concentrations. These spectroscopic findings shed new light on the salt effects on the surfaces structures of the polar organic solutions. It was also shown that the accurate determination of the bulk refractive indices and Raman depolarization ratios for different salt concentrations is crucial to quantitatively interpret the SFG-VS data.     

Alcohol/water-soluble porphyrins as cathode interlayers in high-performance polymer solar cells

Three alcohol/water-soluble porphyrins,Zn-TPy PMe I:zinc(II)meso-tetra(N-methyl-4-pyridyl)porphyrin tetra-iodide,ZnTPy PAd Br:zinc(II)meso-tetra[1-(1-adamantylmethyl ketone)-4-pyridyl]porphyrin tetra-bromide and Mn Cl-TPy PAd Br:manganese(III)meso-tetra[1-(1-adamantylmethyl ketone)-4-pyridyl]porphyrin tetra-bromide were employed as cathode interlayers to fabricate polymer solar cells(PSCs).The PC71BM([6,6]-phenyl C71 butyric acid methyl ester)and PCDTBT(poly[N-9″-hepta-decanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)])-blend films were used as active layers in polymer solar cells(PSCs).The PSCs with alcohol/water-soluble porphyrins interlayer showed obviously higher power conversion efficiency(PCE)than those without interlayers.The highest PCE,6.86%,was achieved for the device with Mn ClTPy PAd Br as an interlayer.Ultraviolet photoemission spectroscopic(UPS),carrier mobility,atomic force microscopy(AFM)and contact angle( )characterizations demonstrated that the porphyrin molecules can result in the formation of interfacial dipole layer between active layer and cathode.The interfacial dipole layer can obviously improve the open-circuit voltage(Voc)and charge extraction,and sequentially lead to the increase of PCE.     

Surface modification of polyolefin separators for lithium ion batteries to reduce thermal shrinkage without thickness increase

Surface chemical modification of polyolefin separators for lithium ion batteries is attempted to reduce the thermal shrinkage, which is important for the battery energy density. In this study, we grafted organic/inorganic hybrid crosslinked networks on the separators, simply by grafting polymerization and condensation reaction. The considerable silicon-oxygen crosslinked heat-resistance networks are responsible for the reduced thermal shrinkage. The strong chemical bonds between networks and separators promise enough mechanical support even at high temperature. The shrinkage at 150 C for 30 min in the mechanical direction was 38.6% and 4.6% for the pristine and present graft-modified separators, respectively. Meanwhile, the grafting organic-inorganic hybrid crosslink networks mainly occupied part of void in the internal pores of the separators, so the thicknesses of the graft-modified separators were similar with the pristine one. The half cells prepared with the modified separators exhibited almost identical electrochemical properties to those with the commercial separators, thus proving that, in order to enhance the thermal stability of lithium ion battery, this kind of grafting-modified separators may be a better alternative to conventional silica nanoparticle layers-coated polyolefin separators.     

CL-20/TNT共晶炸药的分子动力学研究

运用分子动力学(MD)方法,选择凝聚态分子势能优化力场(COMPASS),对六硝基六氮杂异伍兹烷(ε-CL-20)、2,4,6-三硝基甲苯(TNT)晶体及其等摩尔比的CL-20/TNT混合炸药和共晶炸药进行不同温度下恒定粒子数等压等温(NPT)系综模拟研究.结果表明,CL-20/TNT共晶的内聚能密度(CED)和结合能随温度的升高逐渐减小;共晶的CED比混合炸药的大,结合能是混合炸药的2倍多,预示其稳定性明显增强.对相关函数和局部放大结构显示共晶中组分分子间作用主要来自TNT中H和CL-20中O以及CL-20中H和TNT中O之间形成的氢键.通过波动法求得的弹性力学性能结果表明,CL-20/TNT共晶的拉伸模量(E)、体积模量(K)和剪切模量(G)介于ε-CL-20和TNT晶体之间,且随温度的升高而下降,符合一般预期;但共晶炸药的柯西压(C12-C44,Cij弹性系数)、K/G和泊松比(ν)均比其组分炸药ε-CL-20和TNT高得多,预示该共晶具有异常高的延展性和弹性伸长,主要是二组分呈层状交替排列且之间存在较强相互作用所致.     

银纳米颗粒对聚合物太阳能电池性能的提高

采用水溶性银纳米颗粒附着在反型太阳能电池的电子传输层上,用以提高有机太阳能电池的短路电流。所制备的器件结构为ITO/ZnO/Ag NPs/P3HT(Poly 3-hexylthiophene):PC_[60]BM/MoO₃/Ag。其金属银纳米颗粒的表面等离激元在410 nm处出现了共振吸收峰,半峰全宽约为60 nm。器件的光电流在可见光范围内均有所增加,短路电流相对于标准器件提高了20.2%,光电转化效率相对提高了17.2%。     

Advances in high carbon dioxide separation performance of poly(ethylene oxide)-based membranes

Poly(ethylene-oxide)(PEO)-based membranes have attracted much attention recently for CO2 separation because CO2 is highly soluble into PEO and shows high selectivity over other gases such as CH4 and N2.Unfortunately,those membranes are not strong enough mechanically and highly crystalline,which hinders their broader applications for separation membranes.In this review discussions are made,as much in detail as possible,on the strategies to improve gas separation performance of PEO-based membranes.Some of techniques such as synthesis of graft copolymers that contain PEO,cross-linking of polymers and blending with long chains polymers contributed significantly to improvement of membrane.Incorporation of ionic liquids/nanoparticles has also been found effective.However,surface modification of nanoparticles has been done chemically or physically to enhance their compatibility with polymer matrix.As a result of all such efforts,an excellent performance,i.e.,CO2 permeability up to 200 Barrer,CO2/N2 selectivity up to 200 and CO2/CH4 selectivity up to 70,could be achieved.Another method is to introduce functional groups into PEO-based polymers which boosted CO2 permeability up to 200 Barrer with CO2/CH4 selectivity between 40 and 50.The CO2 permeability of PEO-based membranes increases,without much change in selectivity,when the length of ethylene oxide is increased.