Photopolymerization-Induced Two-Beam Coupling and Light-Induced Scattering in Polymethyl Methacrylate

Light amplification due to two-beam coupling is realized in doped polymethyl methacrylate （PMMA） glasses. A coupling gain as large as 14 cm^-1 is obtained. The dynamic behaviour of absorption and light-induced scattering due to the process of photopolymerization are also studied. The results show that the amplification and its dynamic process enable possible applications of PMMA in optical devices.     

PETN炸药NQR信号处理方法

利用核四极共振(Nuclear Quadrupole Resonance, NQR)原理探测隐藏炸药,具有准确率高、误报率低、无放射性沾染和防护问题等优点. 但NQR信号十分微弱,湮没在噪声中,检测困难,这成为制约NQR技术发展的一项瓶颈. 为提升NQR信号信噪比,根据NQR信号的特点,提出了一种基于改进阈值函数小波变换的NQR信号去噪方法. 计算表明该方法可以有效消除外界噪声对信号的干扰,提高探测的准确性.      

30.4 nm Cr/Al/Cr自支撑滤光片的研制

 依据材料的质量吸收系数和波长的关系,选择Cr和Al 设计和制备30.4 nm自支撑滤光片。在制备时以NaCl为脱膜剂,以热蒸发方式蒸镀Al,以电子束蒸发方式蒸镀Cr, 制备了30.4 nm的Cr/Al/Cr自支撑滤光膜,并对滤光片的表面缺陷进行了分析。通过显微镜观察,滤光膜均匀纯净,无明显针孔。Cr/Al/Cr自支撑滤光片在合肥国家同步辐射实验室进行了测量, Cr/Al/Cr厚度为5 nm/500 nm/5 nm和12.5 nm/500 nm/12.5 nm的滤光片在30.4 nm波长处的透过率分别为7.6%和4.6%,透过率曲线和理论计算基本一致。用紫外分光光度计测量得滤光片在200～800 nm波长范围的透过率小于0.02%,满足使用要求。     

基于光学调制的离焦探测技术

通过对常用离焦检测技术的分析,提出了一种基于空间光学调制的离焦探测新方法。该方法利用压电陶瓷驱动变形镜对会聚光束进行调制,在准焦位置放置针孔(或狭缝),通过针孔(或狭缝)的调制光束被光电探测器接收,经相关检波后获得离焦信息。测得的离焦信息包含离焦量和离焦方向,且离焦信号电压与离焦量呈线性关系。搭建了实验装置,利用100 Hz的正弦信号对光束进行调制,检波后得到了焦前4 mm到焦后2 mm范围内的电压信号,结果与理论推导相符。该技术适用于圆对称光束及非圆对称光束的离焦检测,尤其适于具有柱面镜光路结构、需要快速、准确测量x和y方向离焦量的强激光领域。     

基于整形光路的低阶像差校正方法

为满足激光束对远处目标辐照强度的要求,减小热效应对输出光束性能的影响,提出了一种基于整形光路的高能激光低阶像差校正方法。该方法根据波前探测器测到的光束波前畸变,利用激光器整形光路固有的光学元件和调整机构,通过高精密电动平移台和快反镜的快速动作,动态调整各镜片的间距,实时校正激光束的低阶像差,使输出光束恢复至平行出射,从而显著减小激光束的热漂移和热畸变,有效避免了长时间出光时光束的持续发散,极大改善了输出光束性能。试验结果表明,该方法具有校正量大、控制方便、结构紧凑等优点,能够很好地改善激光器输出光束质量,显著提高激光束远场作用效果。     

Pressure-induced structural transition and thermodynamic properties of RhN2 and the effect of metallic bonding on its hardness

The elastic constant, structural phase transition, and effect of metallic bonding on the hardness of RhN2 under high pressure are investigated through the first-principles calculation by means of the pseudopotential plane-wave method. Three structures are chosen to investigate for RhN2, namely, simple hexagonal P6/mmm （denoted as SH）, orthorhombic Pnnm （marcasite）, and simple tetragonal P4/mbm （denoted as ST）. Our calculations show that the SH phase is energetically more stable than the other two phases at zero pressure. On the basis of the third-order Birch Murnaghan equation of states, we find that the phase transition pressures from an SH to a marcasite structure and from a marcasite to an ST structure are 1.09 GPa and 354.57 GPa, respectively. Elastic constants, formation enthalpies, shear modulus, Young＇s modulus, and Debye temperature of RhN2 are derived. The calculated values are, generally speaking, in good agreement with the previous theoretical results. Meanwhile, it is found that the pressure has an important influence on physical properties. Moreover, the effect of metallic bonding on the hardness of RhN2 is investigated. This is a quantitative investigation on the structural properties of RhN2, and it still awaits experimental confirmation.     

一种基于DSP的星图识别技术

针对星体跟踪器星图识别算法的复杂性以及星体跟踪器对体积、功耗的要求,介绍了一种基于多边形角距匹配的星图识别算法以及该算法在以DSP为基础的硬件平台上的实现.实验结果证明,复杂的星图识别算法可以在基于DSP的嵌入式平台上实现,并能达到系统实时性的要求.     

短波FH／MFSK编码系统中部分频带噪声阻塞的性能

研究了带反馈链路的选择式频率分集的短波信道ＦＨ／ＭＦＳＫ编码系统，在具有加性白高斯噪声（ＡＷＧＮ）的瑞利衰落信道中，存在部分频带噪声阻塞时的性能，给出了采用ＲＳ码、双－ｋ码、重发码时，无编码和有编码系统的码符差错率与比特能量噪声比的关系曲线．     

聚苯乙烯薄膜对自支撑锆薄膜的性能改善

 利用直流磁控溅射方法和提拉法制备了自支撑Zr/C₈H₈复合滤光膜和C₈H₈滤光膜。用同步辐射光源测量了滤光膜对软X射线的透射率，用俄歇电子能谱分析了膜中的元素含量。结果表明，虽然C8H8薄膜的加入在一定程度上降低了Zr滤光膜在软X射线波段的透射率，但较好地阻止了存储和使用过程中氧、氮等杂质对Zr金属膜的入侵，有效地改善了滤光膜的环境稳定性；同时很好地改善了Zr滤光膜的力学性能和表面面形，使制备的成品率提高了20%。