排序方式: 共有44条查询结果,搜索用时 78 毫秒
31.
32.
33.
34.
本文首先制备并表征了介孔二氧化硅SBA-15、 填充导电聚合物的复合材料PANI/SBA-15和复合材料PPy/SBA-15, 并建立双流计实验台开展了材料压片情况下的热导率研究. 在测量得到复合材料热导率的基础上, 引入当量孔径, 结合测量孔径对 PANI/SBA-15和PPy/SBA-15复合材料热导率随填充量的变化进行了定性分析. 分析表明: PANI/SBA-15和PPy/SBA-15复合材料的热导率比基材SBA-15的热导率大得多; 在相同的测量孔径和当量孔径情况下, PANI/SBA-15复合材料的热导率比PPy/SBA-15复合材料的热导率大; 导电聚合物填充到复合材料孔道内和孔道外都有助于热导率的提高, 填充到孔道内比填充到孔道外对热导率提高的贡献更大. 相似文献
35.
Mesoporous silica SBA-15 consists of uniform hexagonal, unconnected cylindrical channels with diameters that can be tuned within a range of 1.5 nm-30 nm, and is thought to have a special thermal conductivity. The theoretical investigation of the shell thermal conductivity of the mesoporous silica is performed in the relaxation time approximation in this paper and an available one-dimensional heat transfer model is used to predict the effective thermal conductivity (ETC) of the mesoporous silica. The experimental result of the ETC is also presented for comparison. The shell thermal conductivity of the mesoporous silica decreases with mesochannel radius increasing or wall thickness decreasing, but does not strictly decrease with porosity increasing. The thermal radiation possibly plays a primary role in heat transfer at the large porosity scale. The predicted ETC of SBA-15 with only conduction considered is quite low at the large porosity, even lower than the thermal conductivity of the silica aerogels. To realize it, doping carbon or other matters which can strongly absorb infrared light into SBA-15 is a possible way. 相似文献
36.
竹材是一种重要的森林资源,但容易腐朽霉变,在户外使用受到限制。可采用溶胶-凝胶法,在低温条件下制备了TiO2溶胶,并通过浸渍提拉的方式,完成了竹材的纳米TiO2改性。同时利用电子核磁共振波谱仪(NMR)、场发射环境扫描电镜(FESEM)、X射线衍射仪(XRD)、X射线能谱仪(EDAX)对TiO2进行形态和结构表征,重点研究了温度对TiO2薄膜形态、晶型及抗菌防霉性能的影响。研究结果表明,3种温度(20,60,105℃)处理的TiO2改性竹材不仅完全保持了竹材的天然颜色、纹理、结构,而且抗菌性能由不具抗菌性变为对大肠杆菌的杀菌率超过99%,防霉性能提高了10倍以上。这种方法有望成为竹材功能性改良的新手段,并对包括木材在内的其他天然生物质材料保护和改良也具有借鉴意义。 相似文献
37.
本文首先使用Callaway热导率模型对SiO2纳米颗粒的热导率进行了近似计算,然后耦合堆积纳米孔隙内的导热和辐射、颗粒接触热阻,基于颗粒堆积单元结构模型的一维传热分析,最终推导得到了颗粒堆积有效热导率关于颗粒直径和温度、堆积孔隙率、颗粒热导率、气相热导率、辐射传热和接触热阻的关系式,并用该式进行了相关讨论。研究结果表明,对于纳米颗粒堆积,界面接触热阻不容忽略;在低孔隙率和颗粒不参与辐射的条件下,由于受到接触热阻的影响,存在最佳孔隙率(或密度)使得堆积热导率存在最大值。 相似文献
38.
39.
40.