天冬酰胺Schiff碱稀土配合物的合成、表征与抗O-·2性能

合成了天冬酰胺－邻香草醛Schiff碱稀土配合物，用元素分析，摩尔电导率，磁化率测定，差热分析，红外与紫外光谱，1H NMR谱等手段对配合物进行了组成与结构表征，并采用EPR技术对化合物的抗超氧阴离子自由基性能进行了探讨。     

微量臭氧氧化反应测定双键位置

微量臭氧氧化反应已广泛地用来测定生物活性物质的双键位置~([1]).我们在昆虫性信息素的研究工作中改进了Beroza的微量臭氧氧化反应装置~([2]),使臭氧直接通过针头进入反应管,这样在改变试样时.仅需调换针头,简便而又不易污染,而且只需要亚微克级的试样量.臭氧化后生成醛或酮,再通过气相色谱或色质联用仪检测,就可以定出试样的双键位置。     

量子点标记链霉亲和素及其生物活性检测

选用无机盐为前驱体,在水相中合成CdTe量子点,并用此量子点标记链霉亲和素,通过SephadexG-100层析分离纯化量子点标记的链霉亲和素,采用磁颗粒标记的链霉亲和素与量子点标记的链霉亲和素竞争结合辣根过氧化酶标记的生物素,即酶联免疫竞争抑制分析法检测链霉亲和素标记量子点后的生物活性,计算约70.3%的链霉亲和素标记到量子点上,且具有生物活性。每毫克量子点大约可偶联0.14 mg的链霉亲和素。采用荧光光谱研究量子点标记前后的荧光变化,标记后量子点的最大发射波长蓝移了8 nm,而发射光谱的半峰宽基本不变,说明量子点与链霉亲和素结合后粒子没有团聚,分散性好。     

Two-dimensional electron gas characteristics of InP-based high electron mobility transistor terahertz detector

The samples of In_xGa_(1-x)As/In_(0.52)Al_(0.48)As two-dimensional electron gas(2DEG)are grown by molecular beam epitaxy(MBE).In the sample preparation process,the In content and spacer layer thickness are changed and two kinds of methods,i.e.,contrast body doping andδ-doping are used.The samples are analyzed by the Hall measurements at 300 Kand 77 K.The In_xGa_(1-x)As/In_(0.52)Al_(0.48)As 2DEG channel structures with mobilities as high as 10289 cm~2/V·s(300 K)and42040 cm~2/V·s(77 K)are obtained,and the values of carrier concentration(Nc)are 3.465×10~(12)/cm~2and 2.502×10~(12)/cm~2,respectively.The THz response rates of In P-based high electron mobility transistor(HEMT)structures with different gate lengths at 300 K and 77 K temperatures are calculated based on the shallow water wave instability theory.The results provide a reference for the research and preparation of In P-based HEMT THz detectors.     

Experimental demonstration of underwater optical wireless power transfer using a laser diode

We experimentally demonstrate an underwater optical wireless power transfer(OWPT) using a laser diode(LD)as a power transmitter. We investigate the characteristics of a solar cell and a photodiode(PD) as a power receiver. We optimize the LD, the PD, and the solar cell to achieve the maximum transfer efficiency. The maximum transfer efficiency of the back-to-back OWPT is measured as 4.3% with the PD receiver. Subsequently, we demonstrate the OWPT in tap and sea water. Our result shows an attenuation of 3 dB/m in sea water.     

Geometrical optics-based ray field tracing method for complex source beam applications

Due to the fact that traditional ray field tracking approaches require a large number of geometrical optical(GO) ray tubes,they are very inefficient in many practical applications.An improved ray model scheme for a complex source beam(CSB) tracking technique is proposed in this paper.The source field can be expressed by a superposition of CSBs,then every CSB basis function has a Gaussian-type amplitude distribution and is suitable for replacing a GO ray tube in the ray tracing approach.The complex phase matching technique is adopted to find the reflected beam in the reflection point where local approximation is used to represent the curved surface in its neighborhood.A new solution to multiple reflections using the conventional right-handed reflected system is used to track the field easily.Numerical results show the accuracy of the proposed method.     

通向钙钛矿电泵浦激光的研究进展EI北大核心CSCD

可溶液法制备的钙钛矿拥有优异的光学、电学性能,是一类极具潜力的电泵浦激光增益介质。近年来,基于钙钛矿材料的室温连续光泵浦激光以及大电流电致发光器件陆续被报道,在通向钙钛矿电泵浦激光的研究上取得了可喜进展,本文以此为主题展开综述。首先,介绍了钙钛矿材料实现电泵浦激光的优势。接着,梳理了现阶段通向钙钛矿电泵浦激光的两大问题,即非辐射复合损耗高和热效应严重,同时给出了改善这两大问题可采取的一些有效策略。然后,给出了电荷注入平衡化、降低光学损耗、促进粒子数反转等补充手段,它们有力推动了通向钙钛矿电泵浦激光研究向前发展。此外,还介绍了钙钛矿表面等离激元激光、钙钛矿激子极化激元激光等有望实现低阈值钙钛矿电泵浦激光的新机制。最后,总结全文,并对电泵浦钙钛矿激光未来研究做出了展望。     

固定Ionic liquid/Silica sol/Nafion膜中的联吡啶钌电化学发光行为的研究及应用

制备了Ionic liquid/Silica sol/Nafion-联吡啶钌复合物膜修饰金电极。采用循环伏安(CV)和电致化学发光(ECL)法,考察了联吡啶钌和左氧氟沙星在此修饰电极上的电化学及其发光行为。结果表明,此修饰电极表现出很好的电化学活性和电化学发光响应。基于左氧氟沙星对固定化联吡啶钌在0.1 mol/L磷酸盐缓冲液中的弱电化学发光信号有较强的增敏作用,建立了电化学发光检测盐酸左氧氟沙星的新方法。在最佳实验条件下,左氧氟沙星浓度在1.0×10-7～1.0×10-4mol/L范围内与相对发光强度呈线性关系(r2=0.998 4),检出限(S/N=3)为1.59×10-9mol/L。连续平行测定2.2×10-5mol/L的左氧氟沙星溶液10次,发光强度的相对标准偏差(RSD)为3.6%。对样品进行回收率试验,回收率在95.6%～103.5%之间,RSD(n=5)为3.0%。该方法具有较高的选择性和灵敏度,样品处理简单快速,用于盐酸左氧氟沙星的测定,结果满意。     

供配电模块的高精度采集的设计

To solve the power distribution unit’s stability and reliability, This paper introduces a design of a high-precision data acquisition system processor about FPGA, it studied the voltage conversion by using subtraction circuit design techniques, colleting multi-channel acquisition and disposing real-time multi-channel telemetry signal processing. It transferred the data to computer completed the real-time status monitoring. The research stressed the acquisition and distribution of high-progress Circuit Design, describing the transmission and implementation of RS422 data transmission module and receiving the process and the UART core functions. After a lot ofStests,it showed thatSthe schemeSis stable、practical and meets the design requirements.     

纳米储能纤维复合过滤膜的制备及性能

以静电纺丝技术制备的同轴聚甲基丙烯酸十八烷基酯(PSMA)/聚对苯二甲酸乙二酯(PET)纳米储能纤维为支撑层,经聚偏氟乙烯(PVDF)涂覆成膜和溶剂化处理,制备了一种低压高水通量的纳米储能纤维复合过滤膜(NFCM),其中以水或乙醇为凝固溶液的复合过滤膜分别记为NFCM@H2O或NFCM@EtOH.分析并讨论了不同溶剂处理方式对NFCM力学性能和表面形貌的影响,表征了膜的纯水通量和抗污性能,用扫描电子显微镜(SEM)观察了膜的横断面形貌.结果表明,PSMA/PET纳米储能纤维具有明显的吸放热行为,熔融温度和热焓值分别为36.5℃和10.7J/g,NFCM的熔融温度和热焓值分别为36℃和2.7J/g.NFCM的形貌结构、纯水通量和截留率与溶剂处理方式相关,NFCM@EtOH膜的水通量介于100~1400L/(m2·h)之间,而NFCM@H2O膜的水通量仅在40~220L/(m2·h)之间.NFCM的拉伸强度由初始0.925MPa(PVDF)提高到4.28MPa以上.NFCM中的相变材料对膜过滤性能有重要影响,并在过滤温度低于50℃时具有减缓作用.