离子自组装超分子荧光材料及其光致各向异性特性

采用离子自组装的方法,制备了侧链含有肉桂酸光敏基元和二苯乙烯荧光基元的新型超分子复合物PCAMSTIL.通过核磁共振(NMR)和红外光谱(FT-IR)表征了该超分子复合物的结构,并用热重分析(TGA)、紫外可见光谱(UV-Vis)和荧光光谱(FL)研究了其热稳定性和光学性能.将PCAMSTIL旋涂成膜,薄膜经过266 nm偏振脉冲激光辐照后,肉桂酸发生轴向选择的[2+2]加成,薄膜垂直于激光偏振方向的紫外可见吸收明显大于平行方向的吸收,证实薄膜具有取向性.取向薄膜的最大吸收二向色性取向值最大可达0.103,优于一般肉桂酸材料的取向性,肉桂酸分子的取向也引起二苯乙烯荧光分子的协同取向,荧光偏振发射比可达1.73.     

O+DC1→OD+Cl反应在~3 A″势能面上的动力学研究(英文)

在~3A″势能面上,在散射能为14～20 kcal/mol的范围内,运用准经典轨线方法对O+DCl→OD+Cl进行了动力学研究.我们发现积分散射截面随着散射能的增加而增大,产物OD的振动分布发生了很强的粒子数的反转现象,且振动激发较弱、转动激发较强.后向散射居于主导地位,碰撞能的变化对产物转动取向的影响不大.     

High temperature thermoelectric properties of highly c-axis oriented Bi2Sr2Co2Oy thin films fabricated by pulsed laser deposition

High-temperature thermoelectric transport property measurements have been performed on the highly c-axis oriented Bi2Sr2Co20v thin films prepared by pulsed laser deposition on LaA1Oa （001）. Both the electric resistivity p and the seebeck coefficient S of the film exhibit an increasing trend with the temperature from 300 K-1000 K and reach up to 4.8 m. cm and 202 V/K at 980 K, resulting in a power factor of 0.85 mW/mK which are comparable to those of the single crystalline samples. A small polaron hopping conduction can be responsible for the conduction mechanism of the film at high temperature. The results demonstrate that the Bi2Sr2Co2Oy thin film has potential application has high temperature thin film thermoelectric devices,     

速凝成晶-粘结法制备稀土磁致伸缩材料TbDyFe的研究

采用速凝成晶技术,制备了具有<112>和<110>择优取向的Tb0.27Dy0.73Fe1.95速凝片.研究发现,速凝片的择优取向和显微组织与冷却速度密切相关.随着冷却速度的增加,其择优取向从<112>向<110>变化,显微组织由枝状晶向胞枝晶转变.研究了由速凝片制备的稀土粘结磁致伸缩样品的性能.结果表明,当粉末粒度≤(100～150)μm时材料性能较好,具有<112择优取向的样品性能高于<110>择优取向的样品,磁场取向成型有利于材料性能的改善.获得了性能良好的粘结磁致伸缩材料,在238.8 kA·m-1时磁致伸缩系数达到740×10-6.     

基于蒽基团的光交联型非线性光学聚合物的合成与表征

在有机二阶非线性光学聚合物聚甲基丙烯酸甲酯侧链中引入可交联的蒽基团，合成含蒽基团的甲基丙烯酸甲酯类聚合物。采用紫外-可见光谱法明确蒽基团在薄膜中的光交联时间，利用蒽基团在光照条件下的可控[4+4]环加成交联反应提高聚合物的取向稳定性。差示扫描量热法（DSC）研究结果表明交联反应后聚合物薄膜的玻璃化转变温度提高了约10℃。聚合物在60℃条件下加热220 h后电光系数仍可保持原来的90%左右，交联后的二阶非线性聚合物的取向稳定性明显提升。     

Status of the GAUDI Event—Processing Framework

The GAuDI architecture and framework are designed to provide a comon infrastructure and environment for simulation,filtering,reconstruction and analysis applications.Initially developed for the LHCb experiment,GAUDI has been adopted and extended by the ATLAS experiment and adopted by several other experiments including GLAST and HARP.we describe the properties and concepts embodied by GAUDI and recent functionality additions and how the project has evolved from a product developed by a tightly-knit team in a single site,to a collaboration between multiple teams at geographically dispersed sites,based loosely on open source concepts.We describe the management infrastructure as well as how we accommodate experment -specific extensions and adaptations as well as an experiment-neutral kernel.     

偶氮苯介晶基元取向方式对其取向稳定性影响

根据取向透射率变化研究了偶氮苯侧链液晶聚合物在不同光照功率条件下的取向,用锥光干涉法表征了侧链介晶基元的取向方向,并研究了升温对取向膜的稳定性影响.实验结果表明介晶基元的取向速度和取向度都随光照时间和光照功率增加而增加|超过一定阈值功率（20 mW/cm2）时,随着光照时间延长薄膜的透射率（取向度）反而降低.高功率光照使侧链介晶基元发生了面内和面外两种取向,面外取向使聚合物膜的透射率降低.面外倾斜取向的介晶基元不稳定,在取向未达到饱和时停止光照,倾斜取向的介晶基元容易发生解取向,而面内取向的介晶基元则能维持取向的状态.用不饱和取向的方法,在光照功率为 20 mW/cm2时,取向时间缩短为饱和取向的1/20,薄膜的取向度提高1.3倍.4 ms的一次曝光足以使聚合物膜产生可读出、稳定的面内取向,取向的结果能保持2年不发生变化.     

Effect of magnetic field orientation on fluidized beds of magnetic particles： Theory and experiment

Geldart-A fluidized beds of fine particles experience a jamming transition between a fluid-like state and a solid-like state at a certain superficial gas velocity, that depends on the relative strength of interparticle attractive forces with respect to particle weight, lnterparticle forces provide the bed with a certain tensile strength in the jammed state. In the work presented here we analyze the behavior of a fluidized bed of magnetic particles subjected to an externally applied magnetic field, which contributes to enhance interparticle forces. The importance of the magnetic contribution to interparticle forces is measured by the changes in the tensile strength and the superficial gas velocity at the jamming transition. The link of the field orientation with the microstructure of the bed is discussed,     

碰撞能量对反应Sr＋HF转动取向的影响

在推广LEPS势能面上,用经典轨线方法,研究了反应碰撞能量对反应Sr＋HF的转动取向的影响.计算结果与产物轨道角动量模型进行比较.计算结果表明,随着碰撞能量的增加,产物转动取向越强烈.