肟醚碳负离子对氮杂环丙烷的开环反应

苯乙酮肟醚α碳负离子在添加 HMPA 的条件下,顺利实现了对单取代和环状氮杂环丙烷的开环,取得中等到良好的收率。四氢萘酮肟醚 α 碳负离子在该条件下也可以对部分氮杂环丙烷开环。反应中 HMPA 起到对锂离子的络合作用,可以在一定程度上增加碳负离子的亲核性。     

Noisy teleportation of qubit states via the Greenberger-Horne-Zeilinger state or the W state

The effects of distributing entanglement through the amplitude damping channel or the phase damping channel on the teleportation of a single-qubit state via the Greenberger--Horne--Zeilinger state and the W state are discussed. It is found that the average fidelity of teleportation depends on the type and rate of the damping in the channel. For the one-qubit affected case, the Greenberger--Horne--Zeilinger state is as robust as the W state, i.e., the same quantum information is preserved through teleportation. For the two-qubit affected case, the W state is more robust when the entanglement is distributed via the amplitude damping channel; if the entanglement is distributed via the phase damping channel, the W state is more robust when the noisy parameter is small while the Greenberger--Horne--Zeilinger state becomes more robust when it is large. For the three-qubit affected case, the Greenberger--Horne--Zeilinger state is more robust than the W state.     

L-半胱氨酸/漆酶修饰的纳米金阴极对氧还原的电催化

以四氯金酸和L-半胱氨酸为原料,合成了L-半胱氨酸功能化纳米金粒子,将此纳米粒子修饰在金盘电极表面并共价偶联漆酶分子。 以循环伏安法研究了此固定漆酶电极在无氧磷酸盐缓冲液中电化学行为和催化氧还原能力,并进一步评估了其作为氧传感器使用的性能：以计时电流法测定其对氧气的检测限,与氧气的亲和力（以米氏常数表征）,研究了传感器的长期使用性、热稳定性和pH-催化电流关系。 结果表明,此固定漆酶电极可以实现漆酶活性中心T2与导电纳米粒子间的直接电子迁移而无需任何外加电子中介体（氧化还原峰的式电位为192.5 mV vs AgCl/Ag）,并在接近漆酶活性中心T3氧化还原式电位（780 mV vs NHE）附近发生氧还原;测得的固酶电极与氧气的亲和力较高（米氏常数为216.4 μmol/L）且检测限低达0.22 μmol/L,在4 ℃下保存60 d后活力仍然保持初始活力的大约78%。 但这种电极的热稳定性较差,受pH值影响较明显,在pH值近于生理条件时几乎完全丧失活力。     

辐射成像系统模拟软件NUCRPD的研发与应用

在辐射成像系统的设计研发中,经常需要计算系统的各项物理性能指标。为了提升产品研发的效率,同方威视联合清华大学,基于蒙特卡罗程序包Geant4,研发了国内首套具有自主知识产权的辐射成像系统模拟软件NucRPD(NUCTECH Radiography Performance Design Tools),其能够快速、精确地模拟系统的各项性能指标。该软件对常用的一些辐射成像系统进行了参数化建模,用户通过修改软件界面上的少量参数,就可以快速建立各类辐射成像系统的几何体、源项、物理模型和统计量,然后在服务器上以并行计算方式完成模拟计算,能在较短的时间内模拟出系统的性能指标,并给出直观的图形帮助用户深入理解模拟结果。NucRPD的模拟结果经过了大量的实验验证,其剂量场分布和物理指标等模拟结果和实验结果符合得很好。NucRPD已经应用于同方威视辐射成像系统产品的设计研发,在产品的物理指标优化和辐射防护优化中发挥了重要作用。     

Single-layer broadband planar antenna using ultrathin high-efficiency focusing metasurfaces

Phase gradient metasurfaces(PGMS) offer a fascinating ability to control the amplitude and phase of the electromagnetic(EM) waves on a subwavelength scale, resulting in new applications of designing novel microwave devices with improved performances. In this paper, a reflective symmetrical element, consisting of orthogonally I-shaped structures, has been demonstrated with an approximately parallel phase response from 15 GHz to 22 GHz, which results in an interesting wideband property. For practical design, a planar antenna is implemented by a well-optimized focusing metasurface and excited by a self-designed Vivaldi antenna at the focus. Numerical and experimental results coincide well. The planar antenna has a series of merits such as a wide 3-d B gain bandwidth of 15–22 GHz, an average gain enhancement of 16 d B, a comparable aperture efficiency of better than 45% at 18 GHz, and also a simple fabrication process. The proposed reflective metasurface opens up a new avenue to design wideband microwave devices.     

Rubidium-beam microwave clock pumped by distributed feedback diode lasers

A rubidium-beam microwave clock, optically pumped by a distributed feedback diode laser, is experimentally investigated. The clock is composed of a physical package, optical systems, and electric servo loops. The physical package realizes the microwave interrogation of a rubidium-atomic beam. The optical systems, equipped with two 780-nm distributed feedback laser diodes, yield light for pumping and detecting. The servo loops control the frequency of a local oscillator with respect to the microwave spectrum. With the experimental systems, the microwave spectrum, which has an amplitude of 4 n A and a line width of 700 Hz, is obtained. Preliminary tests show that the clock short-term frequency stability is 7 × 10~(-11) at 1 s, and 3 × 10~(-12) at 1000 s. These experimental results demonstrate the feasibility of the scheme for a manufactured clock.     

Higgs and Bottom Quarks Associated Production at High Energy Colliders in the Littlest Higgs Model with T-Parity

In the littlest Higgs Model with T-parity,we discuss the Higgs production in association with bottom quarks at the LHC and future electron-positron collider.We calculate the cross sections of production channels pp→bb H,bb→H and bg→b H at 14 Te V LHC and the cross sections of production channel e~+e~-→bb H in(un)polarized beams at the lowest order.In order to investigate the observability,we display some typical final state distributions in the Higgs to diphoton channel.     

聚变堆液态包层提氚鼓泡器的概念设计

在气-液接触法提取液态锂合金中的氢的实验基础上,提出了以气-液交换柱为核心的提氚鼓泡器(LBTB)的概念设计。LBTB 主要由气体进样纯化器、气-液交换柱系统、饱和器－解吸器和辅助系统构成。LBTB以氩氢混合气为吹洗气,其主要功能是在线监测液态包层主回路中的氚行为,并检验多柱级联后的氚回收率是否可以达到90%的期望值。     

基于第一性原理量子输运模拟的并行计算

为了解决基于第一性原理分析计算大尺度量子输运体系时遇到的耗时长久问题,挖掘密度泛函理论与非平衡格林函数相结合方法(DFT+NEGF方法)在自洽迭代过程中的计算热点,就计算电子密度矩阵时的能量点积分和计算格林函数时的矩阵求逆/乘法运算提出MPI/Open MP并行计算方案.能量点积分采用MPI多进程并行方案,在数据初始化时需要将稀疏矩阵和积分能量点依照轮询调度算法分配给各进程.矩阵求逆/乘法的并行化既可调用ScaLAPACK子程序实现又可调用IntelMKL数学库中的OpenMP多线程加速函数实现.由于不同能量点计算的独立性,能量点积分采用的MPI并行计算获得近乎线性的加速比曲线.由于Open MP多线程并行采用的是基于共享内存的数据交换机制以及线程间切换通信开销小,矩阵求逆/乘法运算的OpenMP并行实现在计算效率上要优于而在程序的可扩展性上要劣于MPI多进程并行实现.     

主动中子多重性铀质量测量模拟研究

中子多重性技术常用于测量和核查核材料,尤其针对具有较厚屏蔽的对象具有不可替代的优势。钚的自发裂变率较高,可以采用被动测量方法,目前已有多款不同的测量装置。然而铀材料的自发裂变率较低只能采用主动测量方法。现有的主动井型符合计数器（AWCC）能够进行主动中子多重性测量铀材料质量,但依然存在探测效率较低,Am-Li中子源产生偶然符合大等缺点。为提高铀材料测量的效率和精度,对主动中子多重性测量方法开展深入研究非常必要。本文参考AWCC模型,利用Geant4软件对探测器和粒子的输运过程进行建模。研究了多重性移位寄存器的不同符合门宽、不同延迟时间对铀测量结果相对偏差的影响规律。计数器的最佳门宽为44 μs,门宽取值范围在计数器衰减时间的1.5倍左右合适;延迟时间大于3倍计数器衰减时间后,相对偏差显著减少。最后讨论了235U富集度变化对主动中子多重性测量结果的影响。为后续主动中子多重性铀质量测量仪器的设计提供了参考。