CO2氧化异丁烷制异丁烯用Pd/V2O5-SiO2催化剂

 利用表面化学反应改性法制备了不同V2O5负载量的V2O5-SiO2表面复合物载体,进而采用等体积浸渍法制备了负载型Pd催化剂. 用N2吸附、 X射线衍射、透射电镜、 X射线光电子能谱、程序升温脱附、化学吸附-红外光谱和微反技术对系列Pd/V2O5-SiO2催化剂的比表面积、晶相结构、价态、异丁烷的化学吸附性能和CO2部分氧化异丁烷制异丁烯的催化性能进行了研究. 结果表明, Pd/V2O5-SiO2催化剂中的钒以V5+形式存在, V5+在催化剂表面形成活性位V=O, 其中 V=O 晶格氧与 i-C4H10分子的-CH3 和-CH 中的H产生化学吸附作用; 催化剂中金属Pd与V4+协同作用使CO2在催化剂上产生了卧式吸附态; 晶格氧参加了催化氧化反应,催化剂中 V5+←→V4+ 的变化构成了催化反应的氧化还原过程. 在525 ℃, CO2/i-C4H10体积比为1和空速为 1200 h-1的条件下,以Pd/25%V2O5-SiO2为催化剂时异丁烷转化率为22.8%, 异丁烯选择性为89.1%.     

Dehydrogenation of isobutane in the presence of carbon dioxide over supported vanadium oxide catalysts

Summary The dehydrogenation of isobutane to isobutene in the presence of carbon dioxide was carried out over supported vanadium oxide catalysts. The influence of the support on the catalytic performance was investigated. The isobutane conversion and isobutene selectivity in the presence of carbon dioxide were compared with the results obtained during the dehydrogenation reaction in the presence of helium (inert gas). The catalysts were characterized by temperature-programmed techniques (TPR, TPD-NH₃, TPD-CO₂).     

Li/富锂钒青铜(Li_6V_6O_(15))二次电池正极材料研究

近年来,人们对二次锂电池的正极进行了不少研究。许多过渡金属氧化物或硫化物,如V_6O(13),Li_(1+x)V_3O_8,TiS_2,MoS_2等被认为是较好的正极材料。Pistoia等研究了Li_(1+x)V_3O_8钒青铜的电化学性能得出,当Li浓度高时,由于电子定域作用使电荷屏蔽效应     

Synthesis and reactivity of metal-containing monomers. 21. Synthesis of TiCl4 and VCl4 complexes with azobisisobutyronitrile and studies of their thermal decomposition

Complexes of azobisisobutyronitrile (AIBN) with titanium tetrachloride and vanadium tetrachloride have been synthesized and characterized. It was demonstrated that Ti(IV) and V(IV) form equimolar complexes with AIBN, with nitrile ligands located incis positions in the coordination spheres of metal atoms. Kinetics of thermal decomposition of free and complexed AIBN were studied and compared. The gas evolution rate was measured in the presence of tetrabutoxytitanium, which does not react with AIBN. It was demonstrated that complexing leads to a marked increase of the rate constant of AIBN thermal decomposition.Institute of Chemical Physics, Chernogolovka, Russian Academy of Sciences, 142432 Chernogolovka. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1746–1754, August, 1992.     

Synthesis and Crystal Structure of a Vanadium(Ⅴ) Complex with 2-Hydroxy-1-naphthaldehyde Isonicotinoyl Hydrazone

The mononuclear vanadium(Ⅴ) complex with 2-hydroxyl-1-naphthaldehyde isoncotinoyl hydrazone was synthesized and characterized by single-crystal X-ray diffraction.The crystal is of monoclinic,space group P2 1/n with a = 10.3153(15),b = 7.4024(11 ),c = 24.413(4) (A),β= 101.911(2)°,V= 1824.0(5) (A)3,Z = 4,Mr = 427.28,Dc = 1.556 g/cm3,F(000) = 880,μ(MoKα) =0.591,the final R = 0.0372 and wR = 0.0926.The vanadium(Ⅴ) atom adopts a distorted square-pyramidal geometry coordinated by the tridentate ligand and two oxygen atoms.The hydrogen bonds and strong π…π stacking interactions link the complex molecules into a 3-D network structure.     

A Restudy of Direct Chelatometric Titration of Vanadium(IV) with N-Benzoyl-N-phenylhydroxylamine as Indicator

This paper restudies the method of direct chelatometric titration of V(IV) with N-benzoyl-N-phenylhydroxylamine (BPHA) as indicator. The indicator functions entirely differently from indicators hitherto used in chelatometry. The solution contains two independent systems – the indicator and the titrand-titrant system – without any color changing species. The BPHA-V(V) chelate once formed as the result of aerial oxidation constitutes the indicator system and does not react with EDTA. Its color therefore remains unchanged throughout titration. It is not a metallochromic indicator. Its function is that of color-screening. The color of the titrant system deepens during titration, but does not change. The end-point is indicated by one color completely covering up the other. Hence, this method is of purely empirical nature.Received July 5, 2002; accepted February 11, 2003 Published online July 16, 2003     

Adsorption of benzene on the V2O5/γ-Al2O3 catalyst

Adsorption of benzene on the V₂O₅/-Al₂O₃ catalysts was studied in the temperature interval from 443 to 493 K and at partial pressures of the adsorbate ranging from 1 to 400 Pa. The adsorption isotherms were plotted. The isosteric heats and various entropy characteristics of adsorption were determined. Mobility of benzene in the adsorption layer is restricted compared to the model of ideal dimeric gas. The adsorbed amounts of benzene and chlorobenzene are compared.     

Ni(phen)(H2O)(V2O6)的水热合成和晶体结构（英）

A novel compound Ni(phen)(H₂O)(V₂O₆) has been hydrothermally synthesized and structurally determined to be a two-dimensional compound, which contains {V₂O₆}_n^2n- chains interconnected by nickel(Ⅱ) complexes via oxygen atoms. The crystallographic data measured by single-crystal X-ray diffraction analysis are as follows: C₁₂H₁₀N₂NiO₇V₂, M_r=454.81, monoclinic, space group P2₁/c, a=0.784 6(3), b=2.103 6(8), c=0.942 3(4) nm, β=112.872(5)°, V=1.433 0(10) nm³, Z=4, D_c=2.104 Mg·m^-3, μ(Mo Kα)=2.615 mm^-1, F(000)=904, T=298(2) K, 4 480 reflections collected, 2 470 independent (R_int=0.032 2), the final R=0.058 4 and wR₂=0.145 7 for 2 303 observed reflections with I>2σ(I). CCDC: 192520.     

High Lithium Capacity MxV2O5Ay·nH2O for Rechargeable Batteries

The aqueous synthesis and electrochemical properties of nanocrystalline M_xV₂O₅A_y·nH₂O are described. It is easily and quickly prepared by precipitation from acidified vanadate solutions. M_xV₂O₅A_y·nH₂O has been characterized by X-ray powder diffraction, electron microscopy, TGA, chemical analyses, and electrochemical studies. The atomic structure is related to that of xerogel-derived V₂O₅·nH₂O. In M_xV₂O₅A_y·nH₂O, M is a cation from the starting vanadate salt and A is an anion from the mineral acid. This material exhibits high, reversible Li capacity and may be considered for use in a cathode in primary and secondary batteries. The lithium capacity of an electrode composed of M_xV₂O₅A_y·nH₂O/EPDM/carbon (88/4/8) is ∼380(mA h)/g (C/80 rate) and the energy density is ∼1000(W h)/kg (120-μm-thick cathode, 4-1.5 V, versus Li metal anode). Critical parameters identified in the synthesis of M_xV₂O₅A_y·nH₂O, with respect to achieving high Li-ion insertion capacity, are acid/vanadium ratio, starting vanadate salt, and temperature. Inclusion of carbon black in the synthesis yields a composite that maintains the high Li capacity, lowers the electrochemical-cell polarization, and preserves the lithium capacity at higher discharge rates. Li-ion coin cells, using pre-lithiated graphite anodes, exhibit electrochemical performance comparable to that of Li-metal coin cells.