α—氨基酸的快原子轰击质谱

本文研究了１８种α－氨基酸的快原子轰击质谱，发现添加三氟乙酸溶液能显著提高灵敏度，改善谱图。特征碎片主要有中性丢失ＣＯ２Ｈ２，Ｈ２Ｏ，ＮＨ３的离子以及Ｒ＾＋离子。侧链的性质决定了碎片的产生和离子的强弱。     

Multielemental characterisation of cobalt by glow discharge quadrupole mass spectrometry

Multielemental determination and the assessment of purity of cobalt metal used in the preparation of Ni-based super-alloys have been carried out by glow discharge quadrupole mass spectrometry (GD-QMS). Relative sensitivity factors (RSF) generated from certified iron matrix reference samples (NIST 663 and 664 low alloy steel pin standards) could be used for the determination of different trace element constituents of the sample. Different wet chemical procedures were also carried out for the determination of the trace constituents in the sample. The GD-QMS results are in reasonably good agreement with those obtained from wet chemical procedures, validating the use of the RSF values generated on low alloy steel standards for the computation of trace element concentrations in cobalt metal. A variety of molecular ions formed through the reaction of cobalt (matrix) with the discharge gas (argon) were also detected.     

Extension of the measuring range of balances

The basic principle of comparing the sample mass with the mass of a reference body in equilibrium gives the equal-armed beam balance a unique accuracy. Main parameters characterising the suitability of the instrument are measuring range, resolution and relative sensitivity (resolution/maximum load). The historical development of the values of these parameters achieved depended strongly on the practical need in those times. Technically unfavourable scales of the oldest Egyptian dynasties (~3000 BC) could resolve mass differences of 1 g and had a relative sensitivity of at least 10^–3. More sophisticated instruments from the 18^th Dynasty (~1567–1320 BC) achieved a relative sensitivity of 10^–4 independent of the size of the instrument. In 350 BC Aristotle clarified the theory of the lever and at about 250 BC Archimedes used the balance for density determinations of solids. The masterpiece of a hydrological balance was Al Chazini’s 'Balance of Wisdom’ built about 1120. Its relative sensitivity was 2⋅10^–5. Real progress took place when scientists like Lavoisier (1743–1794) founded modern chemistry. At the end of the 19^th century metrological balances reached a relative sensitivity of 10^–9 with a maximum load of several kilogrammes. That seems to be the high end of sensitivity of the classical mechanical beam balance with knife edges. Improvements took place by electrodynamic compensation (Emich, Gast). In 1909 Ehrenhaft and Millikan could weigh particles of 10^–15 g by means of electrostatic suspension. In 1957 Sauerbrey invented the oscillating quartz crystal balance. By observing the frequency shift of oscillating carbon nanotubes or of silica nanorods, masses or mass changes in the attogram or zeptogram have been observed recently.     

Fourier interferometric stimulation (FIS) in biology and medicine

A continuously scanning Michelson interferometer was developed to modulate an intensive light source spectrally. The interferogram is used as a stimulus to investigate spectral sensitivities in insects and man. The FIS-method is fast and precise and shows many advantages which are partly based on the advantages of Fourier spectroscopy. The existing applications are summarized.     

原子转移自由基聚合原位合成温敏性微球

以过硫酸钾为引发剂、丙酮-水[V(丙酮)∶V(水)＝4∶6]的混合溶剂为反应介质, 在少量二乙烯苯存在的条件下使苯乙烯(St)和对氯甲基苯乙烯(CMSt)进行无皂乳液共聚反应, 得到了粒径大小均匀的交联型聚苯乙烯(PSt)微球, 由X射线光电子能谱对表面组分测定发现: CMSt上的氯原子在聚合过程中富集于交联微球的表面. 以此交联型PSt微球为原子转移自由基聚合(ATRP)的引发剂, 在22 ℃下引发N-异丙基丙烯酰胺(NIPAAm)进行原位ATRP反应, 得到了表面原子转移自由基聚合接枝的交联聚苯乙烯(PNIPAAm-g-PSt)温敏性微球. 借助傅立叶变换红外光谱、差示扫描量热仪、扫描电子显微镜及激光光散射仪等对PNIPAAm-g-PSt的结构、相转变温度、形态及不同温度下的粒径变化进行了测定, 结果表明NIPAAm单体成功地原位ATRP接枝在交联PSt微球的表面, 接枝微球的球形更规整, 在水中的相转变温度约为32 ℃, 具有明显的温度敏感性.     

头发锌含量测定的应用价值评价

以114例2－5岁儿童为对象，同时取其末梢血和头发，测定锌含量。以全血锌值为标准，评价头锌测定的应用价值。结果显示，头发锌测定的灵敏度可达86．1％，特异度为52．4％，符合率为73．7％。     

Adaptive approach for nonlinear sensitivity analysis of reaction kinetics

We present a unified approach for linear and nonlinear sensitivity analysis for models of reaction kinetics that are stated in terms of systems of ordinary differential equations (ODEs). The approach is based on the reformulation of the ODE problem as a density transport problem described by a Fokker-Planck equation. The resulting multidimensional partial differential equation is herein solved by extending the TRAIL algorithm originally introduced by Horenko and Weiser in the context of molecular dynamics (J. Comp. Chem. 2003, 24, 1921) and discussed it in comparison with Monte Carlo techniques. The extended TRAIL approach is fully adaptive and easily allows to study the influence of nonlinear dynamical effects. We illustrate the scheme in application to an enzyme-substrate model problem for sensitivity analysis w.r.t. to initial concentrations and parameter values.     

老年人彩度对比敏感度函数研究及滤波应用

为研究老年人彩色视觉频率响应特性，获取彩度对比敏感度与空间频率之间的函数关系，本文在LCH均匀颜色空间基础上，固定明度和色调角值，以彩度作为变量，设计人眼彩度对比敏感度实验，进行人眼视觉观察实验。获得彩度对比敏感度与空间频率的关系，并构建指数型对比敏感度函数模型。经分析表明老年人眼彩度对比敏感度随着空间频率的增加，产生先升高再缓慢降低的变化，各色调角下彩度对比度存在差异。经分析人眼对比敏感度差异与人眼视觉辨色特性有很大的相关性。并且，将构建的对比敏感度函数模型用于实现基于人眼视觉系统的滤波处理。     

The characterization of the capability of a balance

A survey is given on important standardized definitions by which the capability of balances may be characterized. Some modifications are proposed with regard to the use of mass sensors for the continuous determination of mass variations. An important supplement is the relative resolution introduced by Jenemann. Optimum values are presented.I am indepted to H. R. Jenemann for his critical remarks.     

Stability of the FID sensitivity during an analysis in capillary GC

The sensitivity of an FID may change when the carrier gas flow rate changes during a chromatographic run. Sample parts which are eluted at reduced FID sensitivity produce a reduced peak area, hence are discriminated as compared to other components. Sensitivity changes were studied for hydrogen as carrier gas. For the detector tested, differences in the carrier gas flow rates of 1 ml/min shifted the FID sensitivity by 1 to 5% (depending on the fuel gas supply). Thus the stability of the sensitivity is no longer ensured as soon as the carrier gas flow rate is changed manually or by an automatic programmer during an analysis. Sensitivity drifts may also occur during temperature programmed runs with a pressure regulated carrier gas supply since the gas flow through the capillary drops with increasing temperature. Such shifts in the response became noticeable as soon as relatively high carrier gas flow rates combined with long range temperature programmes were used. The typical patterns of such discriminations are shown, closing with a discussion on the possibilities for minimizing such undesired effects.