Hollow Carbon Nanofibers Filled with MnO2 Nanosheets as Efficient Sulfur Hosts for Lithium–Sulfur Batteries

Lithium–sulfur batteries have been investigated as promising electrochemical‐energy storage systems owing to their high theoretical energy density. Sulfur‐based cathodes must not only be highly conductive to enhance the utilization of sulfur, but also effectively confine polysulfides to mitigate their dissolution. A new physical and chemical entrapment strategy is based on a highly efficient sulfur host, namely hollow carbon nanofibers (HCFs) filled with MnO₂ nanosheets. Benefiting from both the HCFs and birnessite‐type MnO₂ nanosheets, the MnO₂@HCF hybrid host not only facilitates electron and ion transfer during the redox reactions, but also efficiently prevents polysulfide dissolution. With a high sulfur content of 71 wt % in the composite and an areal sulfur mass loading of 3.5 mg cm^?2 in the electrode, the MnO₂@HCF/S electrode delivered a specific capacity of 1161 mAh g^?1 (4.1 mAh cm^?2) at 0.05 C and maintained a stable cycling performance at 0.5 C over 300 cycles.     

聚晶立方氮化硼刀具切削高锰钢的磨损机制

在半精加工试验条件(切削深度ap=0．5mm，进给量f=0．3mm／r，干切)下研究了聚晶立方氮化硼刀具切削奥氏体高锰钢时的磨损机制，用WDH-Ⅱ型光电温度计测量了切削温度，用工具显微镜测量后刀面磨损量，进而考察了切削时间和切削速度对后刀面磨损量的影响，采用S-250MK型扫描电子显微镜观察刀具前、后刀面的磨损形貌和组成变化．结果表明：当切削温度为400～750℃时，聚晶立方氮化硼刀具同高锰钢中的γ相及其析出相(Fe，Mn)3C之间产生严重的机械磨损；当切削温度超过800℃时，聚晶立方氮化硼刀具同高锰钢单一γ相之间产生扩散磨损；聚晶立方氮化硼刀具适合于高速切削.     

Synthesis and electrochemical properties of copper(II), manganese(III) phthalocyanines bearing chalcone groups at peripheral or nonperipheral positions

In this study, new chalcone compound 1 , new phthalonitrile derivatives 2 and 3, new copper(II), manganese(III) phthalocyanines bearing chalcone groups at peripheral or nonperipheral positions were synthesized. Electrochemistry of tetra-(4-{(2 E )-3-[2-fluoro-4-(trifluoromethyl)phenyl]prop-2-enoyl}phenoxy) substituted Co(II)Pc and Mn(III)Pcs were studied with cyclic voltammetry (CV) to determine the redox properties of the phthalocyanines. According to the results, while the CuPcs 2a and 3a showed two Pc based reduction reactions and one Pc based oxidation reaction, MnPcs 2b and 3b gave two metal-based reduction reactions. All the redox processes are shifted toward positive potentials as a result of the increased electron-withdrawing ability of the trifluoromethyl substituents.     

The Active Sites of a Rod‐Shaped Hollandite DeNOx Catalyst

The identification of catalytically active sites (CASs) in heterogeneous catalysis is of vital importance to design and develop improved catalysts, but remains a great challenge. The CASs have been identified in the low‐temperature selective catalytic reduction of nitrogen oxides by ammonia (SCR) over a hollandite manganese oxide (HMO) catalyst with a rod‐shaped morphology and one‐dimensional tunnels. Electron microscopy and synchrotron X‐ray diffraction determine the surface and crystal structures of the one‐dimensional HMO rods closed by {100} side facets and {001} top facets. A combination of X‐ray absorption spectra, molecular probes with potassium and nitric oxide, and catalytic tests reveals that the CASs are located on the {100} side facets of the HMO rods rather than on the top facets or in the tunnels, and hence semi‐tunnel structural motifs on the {100} facets are evidenced to be the CASs of the SCR reaction. This work paves the way to further investigate the intrinsic mechanisms of SCR reactions.     

Selective Growth and Structural Analysis of Regular MnO Nanooctapods Bearing Multiple High‐Index Surface Facets

Although numerous morphologies of MnO nanostructures have been reported, an exact structural analysis and mechanistic study has been lacking. In the present study, the formation of regular MnO octapods was demonstrated in a simple procedure, comprising the thermal decomposition of manganese oleate. Because of their structural uniformity, an ideal three‐dimensional model was successfully constructed. The eight arms protruded from the cubic center with tip angles of 38° and surface facets of {311} and {533} with rounded edges. The concentrations of oleate and chloride ions were the determining factors for the octapod formation. Selective coordination of the oleate ions to the {100} faces led to edge growth along the <111> direction, which was then limited by the chloride ions bound to the high‐index surface facets. These structural and mechanistic analyses should be helpful for understanding the complex nanostructures and for tuning their structure‐related properties.     

Solvent effects on catalytic activity of manganese porphyrins with cationic,anionic and uncharged meso substituents: Indirect evidence on the nature of active oxidant species

Oxidation of cyclohexene and styrene with sodium periodate and tetra‐n‐butylammonium periodate (TBAP) catalyzed by MnT(3‐MePy)P(OAc), MnT(4‐SO₃)PP(OAc) and MnTPP(OAc) has been studied in water, methanol, acetonitrile and dichloromethane as solvents. The results show significant dependence of the product distribution on the type of solvent and the electronic nature of the aryl substituents introduced at the porphyrin periphery. While the oxidation of cyclohexene and styrene in the presence of MnT(3‐MePy)P(OAc) and MnTPP(OAc) in water (also in methanol) gave the corresponding epoxides as nearly the sole product, performing the reactions in the presence of MnT(4‐SO₃)PP(OAc) yielded the products of allylic oxidation, cyclohexene‐2‐ol and cyclohexene‐2‐one and acetophenone as the major products. In the case of styrene, performing the reaction in the presence of MnT(4‐SO₃)PP(OAc), MnT(3‐MePy)P(OAc) and MnTPP(OAc) in acetonitrile gave a mixture of styrene oxide and acetophenone as the products. Under the same conditions, the oxidation of cyclohexene afforded cyclohexene oxide as approximately the exclusive product. Furthermore, the oxidation of olefins in dichloromethane gave the corresponding epoxide as the exclusive products. The product distributions observed in the protic and aprotic solvents were used to provide indirect evidence on the relative contribution and reactivity of high valent manganese oxo and periodato Mn(III) porphyrin species to the oxidation reactions.