Generation of stable and high-quality frequency-locked carriers based on improved re-circulating frequency shifter

An optical multicarrier generator based on the improved re-circulating frequency shifter (RFS) to generate a larger number of frequency-locked carriers with high-quality has been studied. By eliminating the third-order crosstalk components, the output carrier's number and optical signal-to-noise-ratio (OSNR) of the generator have been improved significantly. In addition, the maximum output OSNR and optimal radio-frequency drive voltages in the cases of different desired carrier numbers have been obtained. Using the improved configuration, 130-tone with high-quality (tone-to-noise ratio ～20 dB and superior flatness <3 dB) where the drive voltage is only around 0.5Vπ can be achieved. The simulation results show a good agreement with the theoretical analysis. The multicarrier generator based on the improved RFS has the potential application in the terabit superchannel optical transmission.     

Determination of Malathion Using Corona Discharge – Ion Mobility Spectrometry with Solid-Phase Microextraction

A corona discharge (CD) ion mobility spectrometer combined with solid-phase microextraction was constructed. The detection limit and stability of the system for malathion detection were improved using a novel sample introduction port through which the sample desorption was performed in high-temperature drift tube and the sample was introduced directly to the ionization area. The working parameters of the distance between CD needle tip and carrier gas outlet, the drift tube and carrier gas temperature, the carrier gas flow, and the voltage on CD needle were selected. When the extraction time for standard malathion was set to 5?min, the detection limit was 0.96?µg?L^?1 based on thrice the baseline noise, the linear range was 50–500?µg?L^?1, the correlation coefficient was approximately 0.9941, and the relative standard deviation was below 10%. Malathion-spiked lake water samples were analyzed using the developed system and the recovery was 92–102%. This method is suitable for the rapid detection of organophosphorus pesticide residues.     

ϡ�������һ�����������ַ���ģ�͵��Ʋ�����

??The paper considers a risk model with two dependent classes of
insurance business. In this model, the two claim number processes are partly sparsely
correlated through an Erlang(2) process. By introducing an auxiliary model, we obtain the
integral equations for ultimate ruin probabilities, and discuss the asymptotic property of
ruin probabilities by renewal approach. We also get the linear differential equations of
ruin probabilities of the model and the corresponding auxiliary model when claims follow
the exponential distributions, and show how solves the linear differential equations by a
specific example.     

Malathion detection method using microhotplate-based preconcentrator and ion mobility spectrometer

A simple and rapid method using a microhotplate-based preconcentrator and an ion mobility spectrometer (IMS) is proposed for the detection of malathion in water. The preconcentrator is prepared by micro-electro-mechanical system (MEMS) process. Coated with Polydimethylsiloxane (PDMS), it has the advantages of solvent-less, low energy cost, self-heating and ease to combine with IMS. The operating conditions of the preconcentrator-IMS system, such as extraction time, extraction temperature, agitation speed and desorption temperature, were optimised. Using the preconcentrator, the sampling procedure can be simplified and the detection limit of the system can be decreased. A linear relationship between the IMS response and the concentration of the analyte solution was verified. The malathion detection limit based on 3 times the baseline noise is 0.43?µg?L^?1 and the total analysis time is less than 30?minutes.     

Like (CO)4, Do (CS)4 and (CSe)4 Have a Triplet Ground State?

Cyclobutane‐1,2,3,4‐tetraone, (CO)₄, was computationally predicted and, subsequently, experimentally confirmed to have a triplet ground state, in which a b_2g σ MO and an a_2u π MO were each singly occupied. In contrast, the (U)CCSD(T) calculations reported herein found that cyclobutane‐1,2,3,4‐tetrathione, (CS)₄, and cyclobutane‐1,2,3,4‐tetraselenone, (CSe)₄, both had singlet ground states, in which the b_2g σ MO was doubly occupied and the a_2u π MO was empty. Our calculations showed that both the longer C?X distances and smaller coefficients on the carbon atoms in the b_2g and a_2u MOs of (CS)₄ and (CSe)₄ contributed to the difference between the ground states of these two molecules and the ground state of (CO)₄. An experimental test of the prediction of a singlet ground state for (CS)₄ is proposed.     

金属锂负极的成核机制与载体修饰

金属锂具有电位低、比容量高等突出优点,是极具吸引力的下一代高能量密度电池的负极材料,然而存在枝晶、死锂、副反应严重、库伦效率低、循环稳定性差等问题,限制了其实际应用。金属锂负极的成核是电化学沉积过程中的重要步骤,锂在集流体或导电载体上的均匀成核和稳定生长对于抑制枝晶死锂、提高充放电效率和循环性能具有关键作用。本文从成核机制与载体效应的角度概述了锂金属负极的研究进展,介绍了锂成核驱动力、异相成核模型、空间电荷模型等内容,分析了锂核尺寸及分布与过电位和电流密度的关系,并通过三维载体分散电流密度、异相晶核/电场诱导成核、晶格匹配等方面的研究实例讨论了载体修饰对锂负极的性能提升。     

Insight into the thermal decomposition of kaolinite intercalated with potassium acetate: an evolved gas analysis

The thermal decomposition process of kaolinite–potassium acetate intercalation complex has been studied using simultaneous thermogravimetry coupled with Fourier-transform infrared spectroscopy and mass spectrometry (TG-FTIR-MS). The results showed that the thermal decomposition of the complex took place in four temperature ranges, namely 50–100, 260–320, 320–550, and 650–780 °C. The maximal mass losses rate for the thermal decomposition of the kaolinite–potassium acetate intercalation complex was observed at 81, 296, 378, 411, 486, and 733 °C, which was attributed to (a) loss of the adsorbed water, (b) thermal decomposition of surface-adsorbed potassium acetate (KAc), (c) the loss of the water coordinated to potassium acetate in the intercalated kaolinite, (d) the thermal decomposition of intercalated KAc in the interlayer of kaolinite and the removal of inner surface hydroxyls, (e) the loss of the inner hydroxyls, and (f) the thermal decomposition of carbonate derived from the decomposition of KAc. The thermal decomposition of intercalated potassium acetate started in the range 320–550 °C accompanied by the release of water, acetone, carbon dioxide, and acetic acid. The identification of pyrolysis fragment ions provided insight into the thermal decomposition mechanism. The results showed that the main decomposition fragment ions of the kaolinite–KAc intercalation complex were water, acetone, carbon dioxide, and acetic acid. TG-FTIR-MS was demonstrated to be a powerful tool for the investigation of kaolinite intercalation complexes. It delivers a detailed insight into the thermal decomposition processes of the kaolinite intercalation complexes characterized by mass loss and the evolved gases.     

Probing the Anticancer Mechanism of (−)‐Ainsliatrimer A through Diverted Total Synthesis and Bioorthogonal Ligation

Herein, we report an efficient approach for exploring the novel anticancer mechanism of (?)‐ainsliatrimer A, a structurally complex and unique trimeric sesquiterpenoid, through a combined strategy of diverted total synthesis (DTS) and bioorthogonal ligation (TQ ligation), which allowed us to visualize the subcellular localization of this natural product in live cells. Further biochemical studies facilitated by pretarget imaging revealed that PPARγ, a nucleus receptor, was a functional cellular target of ainsliatrimer A. We also confirmed that the anticancer activity of ainsliatrimer A was caused by the activation of PPARγ.     

Tunable Surface‐Enhanced Raman Scattering from High‐Density Gold Semishell Arrays with Controllable Dimensions

A convenient reproducible technique is reported for the fabrication of large‐area gold semishell arrays by mechanically pressing porous anodic alumina (PAA) stamps into gold/polymer bilayer structures that serve as robust and cost‐efficient surface‐enhanced Raman‐scattering (SERS) substrates. The surface structure can be tuned further to optimize the enhancement factor according to optional PAA fabrication parameters and imprinting pressures. Finite‐difference time‐domain calculations indicate that the structure may possess excellent SERS characteristics due to the high density and abundance of hot spots.