Sonochemical synthesis and characterization of three nano zinc(II) coordination polymers; Precursors for preparation of zinc(II) oxide nanoparticles

Nanostructures of three Zinc(II) coordination polymers, [Zn(NNO)₂(H₂O)₄]_n (1), [Zn(PNNO)₂(H₂O)₂]_n (2) and [Zn(H₂O)₆]·(INNO)₂ (3) {NNO: Nicotinic acid N-oxide, PNNO: Picolinic acid N-oxide and INNO: Isonicotinic acid N-oxide}, have been synthesized by a sonochemical process and reaction of ligands with Zn(CH₃COO)₂. The Zinc(II) oxide nano-particles have been synthesized from thermolysis of [Zn(NNO)₂(H₂O)₄]_n (1), [Zn(PNNO)₂(H₂O)₂]_n (2) and [Zn(H₂O)₆]·(INNO)₂ (3) at two different methods (with surfactant and without surfactant) and two temperatures (200 and 600 °C). The ZnO nanoparticles were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Comparison of the SEM images of ZnO nano-particles at two different methods and temperatures shows that higher temperature results in an increasing of agglomeration and thus small and spherical ZnO particles with good separation were produced by thermolysis of compounds at 200 °C and by use of surfactant.     

Sulfonated reduced graphene oxide as a highly efficient catalyst for direct amidation of carboxylic acids with amines using ultrasonic irradiation

Sulfonated reduced graphene oxide nanosheets (rGO-SO₃H) were prepared by grafting sulfonic acid-containing aryl radicals onto chemically reduced graphene oxide (rGO) under sonochemical conditions. rGO-SO₃H catalyst was characterized by Fourier-transform infrared (FT-IR) spectroscopy, Raman spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and X-ray photoelectron spectroscopy (XPS). rGO-SO₃H catalyst was successfully applied as a reusable solid acid catalyst for the direct amidation of carboxylic acids with amines into the corresponding amides under ultrasonic irradiation. The direct sonochemical amidation of carboxylic acid takes place under mild conditions affording in good to high yields (56–95%) the corresponding amides in short reaction times.     

Growth mechanism and optical property of CdS nanoparticles synthesized using amino-acid histidine as chelating agent under sonochemical process

Using amino-acid histidine as chelating agent, CdS nanoparticles have been synthesized by sonochemical method. It is found that by varying the ultrasonic irradiation time, we can tune the band gap and particle size of CdS nanoparticles. The imidazole ring of histidine captures the Cd ions from the solution, and prevents the growth of the CdS nanoparticles. The deviation in the linear relation in between cube of radius of nanoparticles and ultrasonic irradiation time confirms the growth of CdS nanoparticles occur via two process; one is the diffusion process of the reactants as well as reaction at the surface of the crystallite. CdS nanoparticles synthesized using histidine as organic chelating agent have band edge emission at 481 nm and have greater photoluminescence intensity with blue-shift to higher energy due to typical quantum confinement effect.     

Sonochemical immobilization of noble metal nanoparticles on the surface of maghemite: mechanism and morphological control of the products

Aqueous sample solutions containing noble metal ions (HAuCl₄, Na₂PdCl₄, H₂PtCl₆), polyethyleneglycol monostearate, and magnetic maghemite nanoparticles were irradiated with high power ultrasound. Analyses of the products showed that noble metal ions were reduced by the effects of ultrasound, and the formed noble metal nanoparticles were uniformly immobilized on the surface of the maghemite. The present “one pot process” significantly simplifies the immobilization of noble metal nanoparticles on the surface of supports, compared with the conventional impregnation method. The average diameter of immobilized Au was 7–13 nm, and the diameters of Pd and Pt were several nm. The diameters depended upon the concentration of polyethyleneglycol monostearate and the concentration of noble metal ions, but not upon the maghemite concentration, indicating the possibility of the morphological controls of the products by adjusting these preparation conditions. The measurements of the average diameters and the numbers of immobilized Au nanoparticles obtained under various conditions suggest that the nucleation of Au does not occur on the surface of maghemite, but it might occur in the homogeneous bulk solution.     

Growth mechanism and optical property of ZnO nanoparticles synthesized by sonochemical method

ZnO nanoparticles have been synthesized by ultrasonic irradiation of an aqueous-alcoholic/aqueous-alcoholic-ethylenediamine (EDA) solutions of zinc nitrate and sodium hydroxide. ZnO nanoparticles possess hexagonal wurtzite structures and they exhibit special photoluminescence properties with a red-shift of 22 nm in UV emission band. It is found that the ultrasonic irradiation time and the solvents both influence the growth mechanism and optical properties of ZnO nanoparticles. The possible growth mechanism of ZnO nanoparticles formation by sonochemical method has been tried to discuss.     

Investigation of design parameters in ultrasound reactors with confined channels

This paper presents a three-dimensional numercial simulation of sonochemical degradation upon cavitational activity. The model relates the simulation of the acoustic pressure distribution to the sonochemical reaction rate. As a case study, the thermal degradation of carbon tetrachloride during sonication is studied in a tubular milliscale reactor. The model is used to optimize the reactor diameter, ultrasound frequency and power dissipated to the ultrasound transducers. The results indicate that multiple transducers at a moderate power level are more efficient than one transducer with high power level. Furthermore, the average cavity volume fraction is proposed as a reaction independent parameter to estimate the optimal reactor design. Within the results obtained in this paper, it appears possible to optimise reactor design based on this parameter.     

Room temperature synthesis of needle-shaped ZnO nanorods via sonochemical method

Single crystalline needle-shaped zinc oxide nanorods were synthesized via sonochemical methods using zinc acetate dihydrate and sodium hydroxide at room temperature. Morphological investigation revealed that the nanoneedles are of hexagonal surfaces along the length. The typical diameter and length vary from 120 to 160 nm and 3 to 5 μm, respectively. Sonication time appears to be a critical parameter for the shape determination. Detailed structural characterization confirmed that the nanorods are single crystalline with wurtzite hexagonal phase. A standard peak of zinc oxide was observed at 520 cm⁻¹ from the Fourier transform infrared spectroscopy. The ultra-violet visible and room temperature photoluminescence (PL) spectroscopic results demonstrate that the synthesized material has good optical properties.     

Sonochemical syntheses of a nano-sized copper(II) supramolecule as a precursor for the synthesis of copper(II) oxide nanoparticles

Nanoparticles of a three-dimensional supramolecular, [Cu(L)₂(H₂O)₂] (1), (L⁻ = 1H-1,2,4-triazole-3-carboxylate), have been synthesized by a sonochemical process and characterized by scanning electron microscopy, X-ray powder diffraction, IR spectroscopy and elemental analyses. The thermal stability of compound 1 both its bulk and nano-size has been studied by thermal gravimetric (TG) and differential thermal analyses (DTA) and compared each other. Concentration of initial reagents effects on size and morphology of nano-structured compound 1, have been studied. Calcination of the nano-sized compound 1 at 600 °C under air atmosphere yields CuO nanoparticles.     

Ultrasound-assisted fabrication and characterization of a novel UV-light-responsive Er2Cu2O5 semiconductor nanoparticle Photocatalyst

The photocatalytic procedure is one of the most favorable methods for the elimination of poisonous organic dyes to achieve clean drinking water. In this research, a fast sonochemistry method was accomplished to attain Er₂Cu₂O₅ (ECO) nanoparticles with a progressive photo-degradation catalytic routine. Tetraethylenepentamine (TEPA) was operated as both alkaline and complexing agents to control growth of designed nuclei due to the formation of hydrogen bonds between active surface groups of TEPA and nuclei and, lastly stop nano-product accumulation. The ultrasonic time and power factors in sonochemistry reaction were improved to control the final nanostructures properties. The surface features of products were measured via diverse characterization systems of spectroscopic and microscopic. The elimination of dissimilar artificial dyes was carried out through Er₂Cu₂O₅ nanoparticle catalysts. The outcome of altering of artificial pollutant, pollutant concentration, scavenger, nano-catalyst dosage and solution pH was titled on the proficiency of nano-catalyst utility. Optimized Er₂Cu₂O₅ nanoparticles have an efficiency of 97% for degradation of erythrosine dye in an acidic medium. The possible mechanism of deletion dye by photocatalytic purpose was studied and concluded that ^?O₂^– radicals help UV-degradation of contamination.