Electrochemical Monitoring of Methotrexate Anticancer Drug in Human Blood Serum by Using in situ Solvothermal Synthesized Fe3O4/ITO Electrode

Here, we reported on a one‐step fabrication of magnetite Fe₃O₄ nanoparticles/indium tin oxide (ITO) electrode based on the direct growing of Fe₃O₄ nanoparticles on the ITO surface by using a solvothermal process. The modified electrode was used as electrochemical methotrexate (MTX) biosensor with high sensitivity based on cyclic voltammetry and square wave voltammetry techniques. The results demonstrated a linear relationship between the MTX concentration and its oxidation current peak over a wide range from 10^?5 to 10^?14 mole/L with a limit of detection of 0.4×10^?15 M based on the square wave voltammetry (SWV) technique. In addition, Fe₃O₄/ITO electrode showed a good capability for measuring very low concentrations of MTX drug dissolved in human serum solution. Also, Fe₃O₄/ITO electrode was used for detecting MTX in blood serum samples collected from patients after their treatment with MTX. The prepared electrode showed the higher sensitivity that higher than the Viva‐E instrument, which opens the door for developing a cheap, simple and higher sensitive MTX sensor.     

Extraction of methyl xanthines and their UHPLC–DAD determination in consumable beverages used in Eastern province of Saudi Arabia

Coffee and tea are the most widely consumed beverages worldwide. However, the consumer may be unaware of the exact amount of methyl xanthine (MX, i.e. caffeine [C], theobromine [TB] and theophylline [TH]) consumed, as most of the products do not list the proper amounts. This may lead to serious risks including cardiovascular, kidney and stimulant effects. The aim of the study was to determine the MX amount in ready-to-use beverages (coffee and tea) collected from various outlets in the city of Al-Khobar, Saudi Arabia. Forty different samples of espresso, black coffee and red tea were collected. A fast, reliable and efficient UHPLC–DAD method was developed and validated for MX determination. Total lipids were extracted and fractionated in order to determine glycolipids, phospholipids and neutral lipids. The r² value for the method was 0.980–0.988 in a linearity range of 0.5–200 ppm. The range for MX (C [0.02–2.39 mg/ml], TB [0.00–0.10 mg/ml] and TH [0.00–0.004 mg/ml]) and total lipids was 1–5 g. The amount of glycolipids (3.1 g) was higher among the lipid fractions followed by phospholipids (1.8 g) and neutral lipids (0.25 g). In general, espresso beverages (20–30 ml) contained high amounts of MX whereas black coffee beverages contained high amount of lipids. Most of the beverages expressed C, TB, TH, lipids or their fractions; however, the product with high amounts of MX and lipids at the same time was espresso (brands Chemistry and Wogard). Although the MX and lipid levels in these beverages well below the allowed limits, care must still be taken, especially when using the beverages with high serving volumes (200–250 ml) or coffee prepared via the filter method i.e. black coffee, using a high temperature for a longer time.     

High-resolution three-dimensional atomic microscopy via double electromagnetically induced transparency

We aim to present a new scheme for high-dimensional atomic microscopy via double electromagnetically induced transparency in a four-level tripod system. For atom–field interaction, we construct a spatially dependent field by superimposing three standing-wave fields(SWFs) in 3 D-atom localization. We achieve a high precision and high spatial resolution of an atom localization by appropriately adjusting the system variables such as field intensities and phase shifts. We also see the impact of Doppler shift and show that it dramatically deteriorates the precision of spatial information on 3 D-atom localization. We believe that our suggested scheme opens up a fascinating way to improve the atom localization that supplies some practical applications in atom nanolithography, and Bose–Einstein condensation.     

Investigation of 500 keV Si ion induced surface structuring of Ni and Ti for enhancement of field emission properties

The present paper reports the investigation of surface morphology, elemental composition, phase changes and field emission properties of Si ion irradiated nickel (Ni) and titanium (Ti). The Ni and Ti targets have been irradiated with 500 keV Si ions generated by Pelletron accelerator at various fluences ranging from 6.9 × 10¹³ to 77.1 × 10¹³ ions/cm². Stopping range of ions in matter analysis revealed higher values of electronic stopping and sputtering yield for Ni as compared with Ti. For both irradiated metals, electronic energy loss dominant over the nuclear stopping. The growth of induced surface structures have been analysed by using field emission scanning electron microscopy (FESEM) analysis. In case of Ni, as the ion fluence increases from 6.9 × 10¹³ to 65.8 × 10¹³ ions/cm², the formation of spherical particulates, agglomers and sputtering is observed. Although in the case of Ti, with the increase of Si ion fluence from 11.6 × 10¹³ to 77.1 × 10¹³ ions/cm², the formation of irregular-shaped particulates along with crater and sputtered channels is observed. X-ray diffraction (XRD) analysis shows that no new phase is identified. However, a significant increase in peak intensity is observed with increasing ion fluence. The variation in crystallite size and dislocation line density is also observed as a function of Si ion fluence. Fourier transform infrared spectroscopy analysis shows that no bands are formed after the Si ion irradiation. Field emission properties of ion-structured Ni and Ti are well correlated with the growth of surface structures observed by SEM and dislocation line density evaluated by XRD analysis.     

Isolation,characterization, and quantification of curcuminoids and their comparative effects in cerebral ischemia

The study reports a rapid and short analytical technique for separation, characterization, and quantitation along with comparative pharmacological effect of curcuminoids in cerebral ischemia. Flash chromatography, using silica and diol columns along with gradient mobile phase, was utilized to separate three curcuminoids, i.e., curcumin (Cur), demethoxycurcumin (DMC), and bisdemethoxycurcumin (BDMC) for the first time. The separated peaks were monitored at 200–360?nm, whereas the purity of compounds (96.2–97.6%) was determined through qualitative analysis such as infrared and ¹H and ¹³C-nuclear magnetic resonance spectroscopy, mass spectrometry (MS), and differential scanning calorimetry. Furthermore, chitosan nanoparticles (CS-NPs) for curcuminoids were prepared and characterized through zeta sizer, zeta potential, scanning electron microscopy, and transmission electron microscopy. The developed ultra performance of liquid chromatography-electrospray ionization-quadrupole-time of flight-mass spectrometry/mass spectrometry (UPLC-ESI-Q-TOF-MS/MS) method showed simplified automation and shorter run time for Combi flash over conventional separation techniques. The CS-NPs for all the three curcuminoids and combined-curcuminoids (CCr) (combined and administered together for a synergistic effect), following intranasal administration in middle cerebral artery–occluded rats were evaluated for grip strength, locomotor activity, and histopathological examination where the anti-ischemic activity was observed, in terms of potency, for all three CS-NPs and CCr as CCr>Cur>DMC>>BDMC. Cur-CS-NPs exhibited more potency among Cur, DMC, and BDMC, whereas CCr was the more potent anti-ischemic drug compared to Cur, DMC, and BDMC. For Cur the characteristic activity is proposed because of the presence of methoxy group on the phenyl ring whereas for CCr it is synergistic effect of curcuminoids.     

Heterocyclic Substitutions Greatly Improve Affinity and Stability of Folic Acid towards FRα. an In Silico Insight

Folate receptor alpha (FRα) is known as a biological marker for many cancers due to its overexpression in cancerous epithelial tissue. The folic acid (FA) binding affinity to the FRα active site provides a basis for designing more specific targets for FRα. Heterocyclic rings have been shown to interact with many receptors and are important to the metabolism and biological processes within the body. Nineteen FA analogs with substitution with various heterocyclic rings were designed to have higher affinity toward FRα. Molecular docking was used to study the binding affinity of designed analogs compared to FA, methotrexate (MTX), and pemetrexed (PTX). Out of 19 FA analogs, analogs with a tetrazole ring (FOL03) and benzothiophene ring (FOL08) showed the most negative binding energy and were able to interact with ASP81 and SER174 through hydrogen bonds and hydrophobic interactions with amino acids of the active site. Hence, 100 ns molecular dynamics (MD) simulations were carried out for FOL03, FOL08 compared to FA, MTX, and PTX. The root mean square deviation (RMSD) and root mean square fluctuation (RMSF) of FOL03 and FOL08 showed an apparent convergence similar to that of FA, and both of them entered the binding pocket (active site) from the pteridine part, while the glutamic part was stuck at the FRα pocket entrance during the MD simulations. Molecular mechanics Poisson-Boltzmann surface accessible (MM-PBSA) and H-bond analysis revealed that FOL03 and FOL08 created more negative free binding and electrostatic energy compared to FA and PTX, and both formed stronger H-bond interactions with ASP81 than FA with excellent H-bond profiles that led them to become bound tightly in the pocket. In addition, pocket volume calculations showed that the volumes of active site for FOL03 and FOL08 inside the FRα pocket were smaller than the FA–FRα system, indicating strong interactions between the protein active site residues with these new FA analogs compared to FA during the MD simulations.     

Heavy Metals in Acrylic Color Paints Intended for the School Children Use: A Potential Threat to the Children of Early Age

Heavy metals are the harmful elements, regarded as carcinogens. Nevertheless, owing to their physical and chemical properties, they are still used in the production of several commercial products. Utilization of such products increases the chance for the exposure of heavy metals, some of them are categorized as probable human carcinogens (Group 1) by the International Agency for Research on Cancer. Exposure of heavy metals to school children at early age can result severe life time health issues and high chance of emerging cancer. Thus, we have performed study relating to the presence of heavy metals in acrylic color paints commonly used by the school children. Acrylic paints of different colors were assayed for seven potential heavy metals manganese (Mn), cobalt (Co), nickel (Ni), zinc (Zn), arsenic (As), cadmium (Cd) and lead (Pb) using microwave digestion and iCAPQ inductively coupled plasma mass spectrometry (ICP-MS) system. The optimized method including paints digestion reagents nitric acid (HNO₃, 65%, 5 mL) and hydrofluoric acid (HF, 40%, 2 mL) have offered excellent method performance with recovery values ranged between 99.33% and 105.67%. The elements were identified in all of the analyzed samples with concentrations ranged from 0.05 to 372.59 µg/g. Cd constitutes the lower percentage (0.05%), whereas Zn constitutes high ratio contribution which was tremendously high (68.33%). Besides, the paints contamination was also color specific, with considerably total heavy metal concentrations found in brunt umber (526.57 µg/g) while scarlet color (12.62 µg/g) contained lower amounts. The outcomes of our investigation highlight the necessity for guidelines addressing the heavy metals in acrylic color paints intended for the school children usage.     

Synthesis and application of silica and calcium carbonate nanoparticles in the reduction of organics from refinery wastewater

Oil refinery is one of the fast growing industries across the globe and it is expected to progress in the near future. The worldwide increase in the generation of refinery wastewater along with strict environmental regulations in the discharge of industrial effluent, persistent efforts have been devoted to recycle and reuse the treated water. The wastewater from the refining operation leads to serious environmental threat to the ecosystem. Therefore, this study aimed to synthesize silica (SiO₂) and calcium carbonate nanoparticles (CaCO₃) in the reduction of organics from refinery wastewater. The synthesized nanoparticles were employed in the reduction of chemical oxygen demand (COD) from refinery wastewater by studying the influence of solution pH, contact time, dosage of nanoparticles and stirring speed on adsorption performance. From the batch experimental studies, the optimized processing conditions for the reduction of COD using SiO₂ nanoparticles are pH 4.0, dosage 0.5 g, stirring speed 125 rpm and 90 min stirring time, and the corresponding values for CaCO₃ nanoparticles are pH 8.0, dosage 0.4 g, stirring speed 100 rpm and 90 min stirring time. The study demonstrates that SiO₂ and CaCO₃ nanoparticles have a promising future in the reduction organics from refinery wastewater in different pH regimes.     

Tris(2‐aminoethyl)amine‐based ferrocene‐terminated dendrimers as burning rate catalysts for ammonium perchlorate‐based propellant decomposition

Ferrocene‐based derivatives show potential application as burning rate catalysts (BRCs) for solid composite propellants. However, migration problems of simple ferrocene‐based derivatives limit their application as BRCs in solid composite propellants. To overcome the migration problems of ferrocene‐based BRCs and to enhance the burning rate of ammonium perchlorate (AP)‐based propellants, zero‐ to second‐generation tris(2‐aminoethyl)amine‐based ferrocene‐terminated dendrimers (G0, G1 and G2) were synthesized. The structures of G0, G1 and G2 were confirmed using ¹H NMR, Fourier transform infrared and UV–visible spectroscopies. The electrochemical behavior of G0, G1 and G2 was investigated using cyclic voltammetry. It was found that G0, G1 and G2 showed redox behavior due to the presence of ferrocene and this redox behavior was diffusion controlled over the investigated scan range. The burning rate catalytic effect of G0, G1 and G2 on thermal decomposition of AP was investigated using thermogravimetry and differential thermogravimetry. G0, G1 and G2 showed good catalytic effect on the thermal decomposition of AP. Anti‐migration studies showed that migration of G0, G1 and G2 was much slower than that of 2,2‐bis(ethylferrocenyl)propane (catocene) and ferrocene.