Input,flux, and persistence of six select pesticides in San Francisco Bay

Temporal patterns of pesticide inputs to San Francisco Bay were identified and correlated with timing of application and transport mechanism. Fluxes were calculated from measured concentrations and estimated flow. Persistence of the pesticides under typical riverine or estuarine conditions were estimated from laboratory experiments. Simazine was detected most frequently and had the highest flux into the Bay, which could be explained by its continuous use and long half-life. In comparison, diazinon was detected at lower concentrations and had a lower flux which corresponded to its lower use and shorter half-life. The order-of-magnitude lower fluxes of carbofuran and methidathion corresponded to their lower use and expected hydrolysis. Molinate was detected at the highest concentration but its flux was lower than expected, considering its very high use and persistence in the laboratory experiments. Additional loss of molinate is likely to occur from volatilization and photodegradation on the rice fields. Although thiobencarb had the second highest use, it had the lowest flux of the six pesticides, which can be attributed to its loss via hydrolysis, photodegradation, volatilization, and sorption to sediments. Fluxes into San Francisco Bay were equal to or greater than those reported for other estuaries, except for the Gulf of Mexico.     

Analytical and kinetic study of the aqueous hydrolysis of four organophosphorus and two carbamate pesticides

The hydrolysis of six selected pesticides has been studied in aqueous solution. Four organophosphorus pesticides (disulfoton, isofenfos, isazofos and profenfos) and two N-methylcarbamate derivatives (oxamyl and ethiofencarb) were selected. Hydrolysis was performed in purified buffered water at different pH in the range 7.0–10.0 (ionic strength?=?2.5?mM, T?=?25°C). At pH?=?8.0, isofenfos and disulfoton (t _1/2?≈?4 years, t _1/2?≈?1 year, resp.) were found to be far more stable than isazofos (t _1/2?≈?5 months), ethiofencarb and profenofos (t _1/2<1 month), themselves more stable than oxamyl (t _1/2?≈?1 day). As expected, a strong dependence on pH was observed for all pesticides: the rate of degradation increased when the pH increased. Degradation products were identified by GC–MS and/or LC–MS. Possible structures are presented in the article.     

Facile Assembly of Dispersed ZrMCM‐41 Nanoparticles Promoted in‐situ by Zirconium Salt

Mesoporous ZrMCM‐41 nanoparticles were synthesized by a usual way where tetraethyl‐orthosilicate (TEOS) and zirconium nitrate were used as the inorganic precursors. The obtained nanoscale ZrMCM‐41 was characterized by X‐ray diffraction, N₂ physis‐sorption, scanning electron microscopy and transmission electron microscopy. Characterization results revealed that zirconium salt added in the synthesis had a crucial effect on the assembly of nanoscale ZrMCM‐41 with relatively uniform particle size, which was rarely observed in reported studies for ZrMCM‐41 synthesized using the similar method. Meanwhile, the possible mechanism behind the synthesis was discussed based on the character of hydrolysis and condensation of TEOS and the mild acidic environment induced by the hydrolysable zirconium salt under aqueous conditions. Thus obtained nanoscale ZrMCM‐41 with developed pore structures may be advantageous to general applications in catalysis or adsorption host‐guest chemistry in terms of efficient mass transport of guest molecules.     

New phosphoroamidate compounds: Synthesis,structural characterization and studies on ZnCl2 assisted hydrolysis of the P–N bond

A variety of phosphorodiamidate compounds were synthesized from the corresponding phosphorodichloridate intermediates and phosphorus oxychloride. These were completely characterized using different spectroscopic methods and single crystal X-ray diffraction studies on one of them. Studies revealed that water in the presence of a mild Lewis acid like ZnCl₂ was found to assist the hydrolysis of the P–N linkage. The proof of this concept was effectively realized through the hydrolysis of hexamethylphosphoramide.     

Poly(trialkylsilyl methacrylate)s: A family of hydrolysable polymers with tuneable erosion profiles

Polymers containing hydrolytically labile trialkylsilyl ester side groups were synthesised via a conventional and a controlled radical polymerization. The trialkylsilyl methacrylate monomer unit was chosen for its capacity to hydrolyse into basic, acid or sea water varying the hydrophilic character of the resulting polymer backbone with time. The hydrolysis or saponification reaction of the ester bond of the trialkylsilyl methacrylate was monitored through a ¹H NMR study showing the formation of siloxane side-products. Several copolymers and polymer blends were prepared as matrixes for controlled erodible systems. Their capacity to hydrolyse was demonstrated through SEM investigations with selective dissolution of free films containing hydrolysable copolymers and PMMA blends. Well-defined random and diblock copolymers with methyl methacrylate were investigated to show the effect of the microstructure on the erosion properties of the corresponding coatings. Poly(methyl methacrylate-b-tert-butyldimethylsilyl methacrylate) diblock copolymers synthesised through the RAFT process showed a better control of the erosion with a constant erosion rate over a long-time service in sea water at pH = 8.2. In addition, experiments showed that the erosion rate could be modulated by varying the molar proportion of hydrolysable side groups onto the copolymer backbone and the weight amount of copolymers mixed with PMMA in toluene solution.     

The hydrolysis of pyridilmonoimines in acidic aqueous media

The rates of hydrolysis of some pyridilmonoimines have been investigated in aqueous methanol medium of acetate buffer. The hydrolysis of the studied bases found to be slower than that of benzylideneaniline. It is evident from the dependent of the rate constants upon the buffer concentration that the rate equation has the form of special and general acid catalysis. From the results it is suggested that the rate-determining step appears to be the protonation of the nitrogen atom of the imino group of the monoamines at the employed pH.     

Analysis of Low-polar Ginsenosides in Steamed Panax Ginseng at High-temperature by HPLC-ESI-MS/MS

A high performance liquid chromatography coupled with electrospray ionization-tandem mass spectrometry( HPLC-ESI-MS/MS) method was developed for the analysis and identification of ginsenosides in the extracts of raw Panax ginseng(RPG) and steamed Panax ginseng at high temperatures(SPGHT). A total of 25 ginsenosides were extracted include of which 10 low-polar ginsenosides, such as ginsenosides F4, Rk3, Rh4, 20S-Rg3, 20R-Rg3 and so on, were identified according to their HPLC retention time and MS/MS data. The results indicated that the low polar ginsenosides were seldom found in RPG. For the exploration of the transformation pattern of the ginsenosides in steam processing, the standards of ginsenosides Re, Rg1, Rb1, Rc, Rb2, Rb3 and Rd were selected and hydrolyzed at a temperature of 120 ℃. The results show that these polar ginsenosides can be converted to low-polar ginsenosides such as Rg2, Rg6, F4, Rk3 and Rg5 by hydrolyzing the sugar chains.     

Poly(4-vinylpyridine) catalyzed hydrolysis of methyl bromide to methanol and dimethyl ether

The hydrolysis of methyl bromide with neutral water is performed in the presence and absence of various amines in a batch reactor at different temperatures (50–125 °C). Screening of poly(4-vinylpyridine) as a potential reusable solid amine catalyst showed maximum efficiency. This significant enhancement in efficiency is due to the capture of HBr by solid PVP and remains phase-separated driving the reaction forward. The major advantage of this process is that the polymer can be easily regenerated and reused without loss of activity making it a very effective catalyst for the conversion of methyl halides to methanol and dimethyl ether.     

从单一多位交换~(119)Sn二维交换谱求取SnCl_6~(2-)水解体系的动态交换速率常数

本文对如何从单一二维交换谱提取速率常数进行了理论分析,提出了一种近似处理方法,即把较短混合时间τ_m内在二维平面上磁化强度传递看成是单向进行的,进而导出了二维交换谱中所有峰强随τ_m变化的表达式。所得结果与Ernst的精确结果在一级近似下完全一致,在二级近似下略有不同,但将难以求解的问题转化成简单的代数方程、用这一方法对新近获得的SnCl_4·5H_2O在水溶液中的~(119)Sn二维交换谱进行了处理,得到与实验相吻合的结果,并求得了SnCI_6~(2-)水解体系的动态交换速率常数。