光学多层薄膜反向工程中局部优化算法的性能分析

以锗基红外宽带增透膜(AR)为例,基于Matlab最优化工具箱,研究了多种局部优化算法在多层膜设计中的性能和反向工程算法开发中的可行性,并就数值实验中出现多解性问题的成因、分析及解决方案进行了探讨.结果表明,Matlab最优化工具箱中的导数算法在多层膜局部优化设计上具有更好的局部极值搜索性能和收敛速度;非导数算法性能较...     

微晶玻璃腔体一体化兰姆凹陷稳频He-Ne激光器(Ⅰ):结构与工艺

介绍了利用兰姆凹陷稳频He-Ne激光器的基本结构与腔长调节工作方式,从激光器结构方面对影响其预热时间、频率稳定度和频率重复性的主要因素进行了深入探讨。介绍改进设计的新型微晶玻璃腔体一体化兰姆凹陷稳频He-Ne激光器的基本结构、制作工艺与优势。该激光器腔体采用极低膨胀系数的微晶玻璃材料,反射镜采用石英镜片光胶连接,无应力超高真空铟封形式,谐振腔稳定性好。利用该激光器进行了实验,实验结果表明,该激光器工作中不需要预热,环境适应能力极强,在高低温与冲击振动条件下均能稳定工作,频率稳定度可以达到10-10量级。     

激光陀螺基片散射收集系统的设计与分析

研究了散射测量在激光陀螺用石英基片表面检测中的应用.比较发现,收集物镜比积分球更有利于体散射的消除,更适用于直接检测超光滑石英基片表面的散射测试系统.用ZEMAX设计了散射光收集物镜,使其数值孔径达到了0.4,并完全消除了轴上距离大于1.5 mm的散射点的体散射;为了消除光电倍增管输出本身随时间长漂的问题,设计了特定的...     

激光陀螺新型槽片

根据激光陀螺的使用要求,针对传统槽片在结构和材质上给加工和陀螺性能所带来的不利因素,设计一种集微晶玻璃和熔石英玻璃的优点于一体的新型槽片结构。其基体采用与陀螺腔体材料相同的底膨胀系数的微晶玻璃,反射片采用抛光表面特性很好的熔石英玻璃,通过光胶接合组成一个完整的新型槽片。并针对新的槽片结构提出了与之相应的陀螺腔体贴片面加工方案,使其既能配合新结构的槽片又不增加腔体的制造难度。同时还提出和实现了在加工中采取球面部件与槽片基体分开加工的方式,使得新结构槽片不仅解决了长期困扰陀螺制造行业的因石英槽片易漏氦而引起的陀螺存储寿命相对较短的问题,同时还降低了球面基片超光滑表面加工难度和加工成本。     

Polarization modulation in single-frequency He-Ne laser with an anisotropy feedback cavity

The polarization state is modulated by tilting birefringence component placed in the feedback external cavity.The variation of the polarization state in one period of modulation is found to be similar to sine wave.The periods become increasingly smaller.The maximum of variation in one period decreases against the rotated angle.The experimental phenomenon is subjected to the change of optical path and secondary reflection.The phenomenon is analyzed theoretically based on geometrical optics and crystal optics.High-accuracy measurements of absolute and relative angles can be realized based on the experimental phenomenon.The angle resolution is 0.1 arcsec in theory.     

Qualification of superpolished substrates for laser-gyro by surface integrated scatter measurement

<正>Integrated scatterometer for qualification of superpolished substrates for laser-gyro by surface scatter loss measurement is constructed.Different from the qualification of substrate by surface roughness,the scatterometer measures the forward surface scatter loss to check whether the mirror made of the substrate will be suitable for the required laser-gyro lock-in specification.The scatterometer utilizes convex lens instead of integrating sphere to collect scatter light.Special sample support and baffle are designed to block unwanted light.The result of stability test is given,which is about 0.4%over 10 h.     

Optical pumping nuclear magnetic resonance system rotating in a plane parallel to the quantization axis

A model of an optical pumping nuclear magnetic resonance system rotating in a plane parallel to the quantization axis is presented. Different coordinate frames for nuclear spin polarization vector are introduced, and theoretical calculation is conducted to analyze this model. We demonstrate that when the optical pumping nuclear magnetic resonance system rotates in a plane parallel to the quantization axis, it will maintain a steady state with respect to the quantization axis which is independent of rotational speed and direction.     

激光陀螺本征模偏振态与磁敏感特性的理论研究

环境磁场的干扰是影响激光陀螺精度的重要因素之一. 为了减小二频机械抖动激光陀螺的磁敏感性, 推导了环形腔的琼斯矩阵, 其中考虑了非共面角、增益介质、腔损耗、腔镜反射各向异性和应力双折射, 采用矩阵本征问题求解的摄动理论分析了环形腔的偏振态和磁敏感特性. 研究表明, 为了减小激光陀螺的磁敏感性, 应减小非共面角和腔损耗, 增大腔镜的反射各向异性. 腔镜应力双折射究竟会增大还是减小磁敏感性与应力作用主轴、受应力腔镜的位置有关, 此外它还会引起顺时针和逆时针模式之间的偏振非互易性. 磁敏感性与腔失谐近似成线性关系, 导致激光陀螺工作于增益峰值时磁敏感性并非最小. 这些结果对减小二频机械抖动激光陀螺的磁敏感性具有较好的指导意义. 关键词： 激光陀螺 磁敏感性 椭圆度 琼斯矩阵     

Method for eliminating mismatching error in monolithic triaxial ring resonators

Several results on optical-axis perturbation and elimination of the mismatching error C of a monolithic triaxial ring resonator (MTRR) are reported. Based on the augmented 5×5 ray matrix method, by simultaneously considering axial displacement of a mirror and the misalignments in three planar square ring resonators of a MTRR, the rules of optical-axis perturbation are obtained. The mismatching error C of the MTRR is eliminated. The results obtained are important for cavity design, as well as in the improvement and alignment of MTRR.     

基于Labview的激光多普勒测速仪的频谱校正

在激光多普勒测速仪中,为了减小由信号处理算法带来的测量误差,提出运用频谱校正算法对多普勒信号的频谱进行校正,详细阐述了能量重心法、比值法和相位差法3种离散频谱校正算法的基本原理,运用这3种算法对理想正弦信号进行仿真,并运用比值法对信号施加不同频率和信噪比的噪音下的正弦信号和实测的多普勒信号进行仿真及实验研究。结果表明:3种算法都可以使信号的频率更接近于真实值,其中能量重心法校正精度相对较低,比值法和相位差法精度较高,尤其是比值校正算法处理速度更快,校正的精度基本不受信噪比的影响。将比值法运用于激光多普勒测速系统,与光接收计数法测量结果进行比较,结果显示:校正后比较正前激光多普勒测速仪测量相对精度提高了2～3倍。