空间飞行器的热比例模型

简要介绍了辐射-导热系统空间飞行器热比例模化的相似准则.报道了使用被动温控方式的三个人造地球卫星热比例模型的设计、制作和实验;实验结果与原型进行了比较.其结果表明:热比例模型工作可以作为空间飞行器热设计的一种手段,以减少热分析和原型热真空实验的工作量,从而降低研制成本,缩短研制周期.     

铁基纳米晶合金介观结构的等效RLC并联模型

根据实验研究成果提出纳米晶合金软磁性能受其介观结构影响的观点，建立了Fe基纳米晶合金的球状介观结构模型，分别求出只有交变磁场或交变磁场和静磁场作用时纳米晶粒球的频率函数——D函数.分析表明，两种D函数都是复变函数，其实部Re(D)为纳米晶电感性质和电容性质的反映，虚部Im(D)为纳米晶电阻性质的反映，据此建立了Fe基纳米晶合金介观结构的等效RLC并联模型.由该模型求得合金产生极值巨磁电阻的条件为v_extGMI=v|_Re(D)=0，决定因素有μ,σ,ω,R和H_ex及微观磁结构. 关键词： Fe基纳米晶合金 等效RLC并联模型 球状介观结构模型 频率函数     

带宽有限随机过程从过采样点的指数阶逼近

带宽有限的宽平稳随机过程的Shannon采样定理在1957年被建立起来.从那以后,关于它在其他随机过程的推广有广泛的研究.然而,直接截断Shannon级数收敛较慢.特别地,我们知道利用在Nyquist采样率下得到的n个采样点的截断级数的均方逼近误差的收敛速率是O(1/n~(1/2)).本文我们n考虑用有限的过采样点来重构带宽有限宽平稳随机过程,其中过采样点是指连续两个采样点之间的距离小于Nyquist采样率.我们研究了最优的线性重构算法和与其相关的本性逼近误差阶.通过过采样,我们发现线性重构算法可以达到指数阶衰减逼近,并且我们还证明线性重构算法不可能有快于指数阶的衰减速率.另外,我们还构造了两个具体的指数阶衰减的重构算法.     

Time-dependent evolution process of Sb_2Te_3 from nanoplates to nanorods and their Raman scattering properties

High-quality Sb_2Te_3 nanostructures are synthesized by a simple hydrothermal method. The morphologies of the nanostructures change from hexagonal nanoplates to nanorods with the extension of growth time. Secondary nucleation is the dominant factor responsible for the change of the morphologies. Structural analyses indicate that all the obtained nanostructures are well crystallized. IR-active phonons are mainly observed in the Raman spectra of the nanoplates and nanorods. The slight deviations are observed in the Raman modes between the nanoplates and nanorods, which could originate from confinement effect in the nanostructures.     

Simulation of multilayer Cu/Pd（100） heteroepitaxial growth by pulse laser deposition

The heteroepitaxial growth of multilayer Cu/Pd(100) thin film via pulse laser deposition (PLD) at room temperature is simulated by using kinetic Monte Carlo (KMC) method with realistic physical parameters. The effects of mass transport between interlayers, edge diffusion of adatoms along the islands and instantaneous deposition are considered in the simulation model. Emphasis is placed on revealing the details of multilayer Cu/Pd(100) thin film growth and estimating the Ehrlich--Schwoebel (ES) barrier. It is shown that the instantaneous deposition in the PLD growth gives rise to the layer-by-layer growth mode, persisting up to about 9 monolayers (ML) of Cu/Pd(100). The ES barriers of The heteroepitaxial growth of multilayer Cu/Pd（100） thin film via pulse laser deposition （PLD） at room temperature is simulated by using kinetic Monte Carlo （KMC） method with realistic physical parameters. The effects of mass transport between interlayers, edge diffusion of adatoms along the islands and instantaneous deposition are considered in the simulation model, Emphasis is placed on revealing the details of multilayer Cu/Pd（100） thin film growth and estimating the Ehrlich-Schwoebel （ES） barrier. It is shown that the instantaneous deposition in the PLD growth gives rise to the layer-by-layer growth mode, persisting up to about 9 monolayers （ML） of Cu/Pd（100）. The ES barriers of 0.08 ± 0.01 eV is estimated by comparing the KMC simulation results with the real scanning tunnelling microscopy （STM） measurements,     

Line positions,intensities, and Einstein A coefficients for 3-0 band of 12C16O: A spectroscopy learning method

Based on the model- and data-driven strategy, a spectroscopy learning method that can extract the novel and hidden information from the line list databases has been applied to the R branch emission spectra of 3-0 band of the ground electronic state of ¹²C¹⁶O. The labeled line lists such as line intensities and Einstein A coefficients quoted in HITRAN2020 are collected to enhance the dataset. The quantified spectroscopy-learned spectroscopic constants is beneficial for improving the extrapolative accuracy beyond the measurements. Explicit comparisons are made for line positions, line intensities, Einstein A coefficients, which demonstrate that the model- and data-driven spectroscopy learning approach is a promising and an easy-to-implement strategy.     

FeCo基磁芯螺线管巨磁阻抗效应与磁芯长度关系的研究

研究了Fe₃₆Co₃₆Nb₄Si_4.8B_19.2合金薄带为磁芯的螺线管(FeCo基磁芯螺线管)的巨磁阻抗效应与磁芯长度之间的关系.研究结果表明,磁芯长度是影响FeCo基磁芯螺线管巨磁阻抗效应的重要因素.当磁芯长度小于螺线管长度时,磁芯螺线管巨磁阻抗的最大值(ΔZ/Z)_max与磁芯长度呈线性关系,其线性相关系数可以根据电磁学理论推导得到;当磁芯的长度大于螺线管的长度时,由于漏磁作用,(ΔZ/Z)_max与磁芯长度的关系偏离了线性关系,(ΔZ/Z)_max与磁芯长度的关系曲线中有一个极值点,(ΔZ/Z)_max在极值点达到最大.磁芯螺线管巨磁阻抗效应曲线的尖刺部分高度(ΔZ/Z)_T与磁芯长度的关系也有类似的极值点,(ΔZ/Z)_T在极值点达到最大值.磁芯螺线管巨磁阻抗效应曲线的尖刺部分对弱磁场敏感,受磁芯退磁场的影响明显,磁芯的退磁场与磁芯长度呈负指数关系. 关键词： 磁芯螺线管 FeCo基合金薄带 巨磁阻抗效应 磁芯长度     

高效毛细管电泳法同时测定药品中苯甲酸和山梨酸钾

建立了毛细管电泳-紫外检测法测定硝酸咪康唑乳膏、小儿止咳糖浆及复方苦参水杨酸散中苯甲酸和山梨酸钾的方法。在230nm波长处以焦性没食子酸为内标物,分离电压为20kV,分离温度为25℃,用20mmol/L硼砂缓冲液(pH9.2)作毛细管电泳的运行液,被测组分与内标物得到快速分离。苯甲酸和山梨酸钾的进样质量浓度在1～400mg/L范围内与电泳峰面积呈良好的线性关系,相关系数r均为0.9999,检出限均为0.15mg/L。方法可用于药品中苯甲酸和山梨酸钾含量的测定。     

O2/CO2条件下煤粉燃烧火焰特性的实验研究

本文利用平面火焰曳带流反应系统,对O2/CO2气氛下的煤粉火焰进行了实验研究.以期通过此实验研究,对后期的实验室规模的实验研究起到指导作用.结果表明:O2/CO2气氛下CO2的存在、氧分压的大小以及煤中的水分含量均对煤粉火焰有较大影响.