一代树状碳硅烷液晶的光化学研究－－端基含12个4－丁氧基氮苯介晶基元

研究了新的含12个丁氧基偶氮苯介晶基元的五代树状碳硅烷液晶D1及偶氮苯介 晶基元化合物M5在氯仿、四氢呋喃、N，N－二甲基甲酰胺、乙醇和苯等溶剂中的量 子产率、反－顺光异构化、光回复异构、反／顺异构组分比、热回复异构及活化能 。D1和M5的光致变色速率常数为10~(-1)s~(-1)，而含同一偶氮基元的光致变色液 晶聚硅氧烷的光致变色速率常数为10~(-8)s~(-1)，因此，液晶树状物D1的光响应 速度比后者快10~7倍。     

四甲基对联苯二胺光敏化聚苯乙烯砜及其模型化合物二苄基砜分解机理的研究

N、N、 N’、N’-四平基对联苯二胺(NTMB)和 3、3’、5、5’-四甲基对联苯二胺(TMB)可以有效地光敏化二苄基砜(DBS)分解和聚苯乙烯砜(PSS)降解。敏化作用是按电子转移机理进行的,电子转移过程可以由NTMB的单重激发态,也可以由三重激发态发生。由三重态电子转移产生的三重态离子自由基对进一步反应生成产物的效率比单重态离子自由基对的效率高10倍。     

EPM-g-GMA接枝率的测定及其增韧PBT的力学性能和形态结构研究

在同向双螺杆挤出机中通过熔融接枝反应制备了EPM g GMA ,将其与PBT在转矩流变仪中熔融共混可以获得增韧的PBT工程塑料 .实验中EPM g GMA接枝率的测定采用红外工作曲线法 ,选用CCl4 做溶剂以避免溶剂对样品吸收峰的干扰 .随着EPM g GMA接枝率的增加 ,PBT EPM g GMA的缺口冲击强度相应提高 ,共混物中EPM g GMA的粒径尺寸减小 ,当EPM g GMA的接枝率为 4 7mL 1 0 0gEPM时 ,EPM g GMA的粒径尺寸可达 0 5 μm ,PBT EPM g GMA的缺口冲击强度达到 5 1 6kJ m2 ,是纯PBT的 3 1倍     

Effects of steric and hydrophobic forces on the rheological properties of ZrO2 suspensions

 The effect of pH on the flow behavior of ZrO₂ suspensions containing polyacrylic and octanoic acids was evaluated. In the flocculated pH regime, the flow behavior is highly shearthinning and can be described by a power-law model. The shear-thinning behavior increases with increasing degree of flocculation. Maximum shearthinning was observed at the zero zeta potential condition. Hydrophobic interaction arising from adsorbed octanoic acid was found to enhance the shear-thinning behavior. No such enhancement was observed for adsorbed polyacrylic acid. It was also illustrated that the viscosity–pH behavior is a mirror image of the yield stress–pH behavior. A quantitative particle-pair interactions model incorporating steric and hydrophobic interactions was proposed to explain the effects of polyacrylic and octanoic acids on the maximum yield stress. Received: 23 May 1997 Accepted: 4 June 1997     

SYNTHESIS AND THERMAL PROPERTIES OF POLYBENZOXAZOLE FROM SOLUBLE PRECURSOR WITH HYDROXY-SUBSTITUTED POLYENAMINONITRILE

Aromatic polybenzoxazole (PBO) precursor, hydroxy-substituted polyenaminonitrile, was prepared by direct polycondensation of 1,4-bis(l-chloro-2,2-dicyanovinyl)benzene (CCB) and 4,6-diaminoresorcinol dihydrochloride (DAR) using pyridine and N,N-dimethylacetamide as condensing agent and solvent. The precursor has good solubility in polar aprotic solvent which is due to the strong dipolar nature of the main chain. The soluble precursor was subjected to thermal cyclization in an inert atmosphere to convert it into the corresponding PBO, which has its 5% weight loss temperature at 540℃ The fully cyclized PBO were characterized by FT-IR and TGA. The introduction of 10% mol 1,3,5-benzenetricarboxylic chloride (BTC) into the main chain not only has little effect on the solubility of PBO precursor but also raises its 5% weight loss temperature to 552℃ and char yield at 700℃ for the cyclized PBO with BTC.     

Surface recombination in breakdown time delay experiments: Effect of different cathode materials

The late afterglow in nitrogen with iron electrode is studied by the breakdown time delay method, i.e., by measuring the breakdown time delay t_d as a function of the afterglow time . It is proposed that the cause of the secondary electrons initiating the breakdown is the energy of the surface recombination of nitrogen atoms on the iron electrode. The gas-phase and macrokinetic diffusive models are used to describe the experimental breakdown time delay data. By fitting the theoretical curve to the experimental data: (1) it has been confirmed that the recombination on the molybdenum glass is of the second order and the value of the surface recombination coefficient is determined at 4 mbar; (2) it has been shown that the surface recombination on the iron electrode is of the second order, and the effective recombination coefficients are determined; (3) the analytical form of the recombination coefficient as a function of the adsorption characteristics of surfaces and the pressure of the parent gas has been derived. In addition, the orders of surface recombination on the molybdenum-, aluminum-, and gold-plated electrode were determined by the same method.     

吖啶类衍生物的荧光性质

用比较法测得23种啶类衍生物的荧光量子效率（Φf)，以评估这些化合物的荧光性质，结果表明，N－烃基吖啶酮类化合物的荧光量子效率要比9－取代苯基吖啶类和9－取代苯亚甲基－10－甲基－9，10－二氢吖啶类化合物的荧光量子效率大，在非极性溶剂中，9－聚代苯亚甲基－9，10二氢吖啶分子内的强吸电子基NO2增强荧光量子效率，强推电子基OCH3降低荧光量子效率，这些测量结果与取代基的电子作用经验规律不相符，这种现象可以用分子内电荷转移理论进行解释。     

光声量热法测定辅酶B12的光解量子产率

时间可分辨的光声最热法（Time－resolvedphotoacousticcalorimetry；简称PAC）是研究脉冲激光诱发的快速光化学和光生物化学反应过程动力学和热力学信息的一种有效方法[1－5]。本文采用压电陶瓷圆管同时作为样品油和换能器组成的PAC探测系统[6]，以波长λ＝355nm的脉冲激光（脉冲宽度8ns，脉冲重复频率10Hz）为光源激发辅酶B12甲醇溶液；研究其解量子产率，获得了满意的结果．1实验被测溶液注入两端用石英玻璃封口的压电陶瓷圆管内腔，激光束透过石英窗照射溶液（如图］所示）为标定被测样品的非辐射放热量，利用能在极短的时间内（＜l…     

SYNTHESIS OF CONDUCTIVE POLYANILINE VIA OXIDATION BY MnO2

A unique process of chemical oxidation polymerization of aniline using manganese dioxide (MnO2) as the oxidizing agent in an aqueous medium is described. The reaction between aniline and MnO2 follows a mechanism by which the organic monomer is oxidized while the metal oxide undergoes reductive dissolution. The effects of the amount of oxidizing agent and aniline, pH and temperature of the reactive system, type of acid on the yield and conductivity of polyaniline are discussed. The resulting polyaniline was characterized by [R and UV-Vis spectrometry. Polyaniline with a conductivity of 12.5 S/cm was obtained using 0.033 tool of aniline oxidized by 0.023 tool MnO2 in the presence of 100 mL of 2.7 mol/L HCI at 25℃ for 4 h.