人体尿液中双酚A与壬基酚的同位素稀释的LC-MS/MS分析

采用固相萃取、高效液相色谱-质谱/质谱仪同位素稀释技术,建立了尿中双酚A(BPA)和壬基酚(NP)的检测方法.液相色谱分离用C18柱,流动相为甲醇和水,负离子电喷雾模式电离,多反应离子监测方式检测,BPA和NP的定量离子对分别为m/z 226.9/132.9、219.3/118.8, 13C和氘代同位素化合物分别做回收率控制和内标定量.BPA和NP的基质加标回收率分别为86% ～106%、90% ～114%,定量下限分别为0.97、2.3 μg/L.实际尿样的测定验证了该方法的可行性.     

Nonionic Microemulsion: Mechanism of Formation and Percolation

A series of microemulsions, both W/O and O/W, based on nonionic surfactants of the form (NP(EO)_n), were prepared using the titration method. Mixing a constant weight of surfactant with a constant volume of the dispersed phase and an initial volume of continuous phase produces an emulsion, which is titrated to clarity with another surfactant (cosurfactant). Plotting (a) the volume of cosurfactant necessary to transform an emulsion into a microemulsion containing a fixed volume of dispersed phase and constant weight of surfactant versus (b) different initial continuous-phase volumes yields a straight line. Extrapolating from experimentally determined values for the cosurfactant volume to the value corresponding to a zero-volume continuous phase allows the determination of the surfactant molar composition and the average number of ethylene oxides (EO) per nonylphenol adsorbed at the interface. Using a surfactant with the same number of ethylene oxides yields a single-surfactant microemulsion. Measurement of surfactants transmittance in the oil and water phases demonstrates that microemulsification occurs when the surfactant interfacial film is equally soluble in the two phases. Surface pressure measurements reveal that oil penetration impedes formation of O/W microemulsions with n-tetradecane or n-hexadecane as dispersed phase. Conductance, particle size, and transmittance measurements show that above a certain dispersed-phase volume percolation of the microemulsion occurs.     

Preconcentration of middle oxyethylated nonylphenols from water samples on magnetic solid phase

Magnetic solid phase extraction (MSPE) is proposed as a simple and fast method for the preconcentration of free middle oxyethylated nonylphenols (NPs) from water. Middle oxyethylated NPs were extracted by MSPE from different water samples (10 and 500 ml samples of distilled, potable, well, river and pond water in concentrations of 30 and 0.6 μg ml⁻¹) using magnetically modified polyphenyleneoxide, Tenax TA and Tenax GR as magnetic adsorbents. Recoveries were 80–100% and relative standard deviations were less than 10%.     

Accurate-mass identification of chlorinated and brominated products of 4-nonylphenol, nonylphenol dimers, and other endocrine disrupters

LC/ToF-MS was used to identify new chlorination and bromination products of 4-nonylphenol (4-NP), such as 4-NPBr2, 4-NPBrCl, 4-NP dimer (2 isomers), 4-NPCl dimer (2 isomers), 4-NPBr dimer, and a series of methoxy bromo and chloro 4-NPs from a laboratory study of nonylphenol chlorination. The identification procedure used the exact mass, exact mass of the isotope cluster, and their relative intensities, at an average mass accuracy of approximately 1 ppm. The products were produced by a simulated study of industrial cleaning procedures where 4-NP, nonylphenol ethoxylate (NPEO-1 and 2), and nonylphenol carboxylate (NPEC-1) were in contact with sodium hypochlorite solutions (with and without bromide) of various strengths (possible environmental scenarios) at neutral pH. The formation of the products was measured as a function of chlorine concentration, and it was found that 4-NP was the most reactive, producing 4-NPCl, 4-NPCl2, 4-NP (dimers), and the 4-NPCl (dimers). In the presence of bromide ions, a mixture results with products of 4-NPBr2, 4-NPCl, 4-NPCl2, 4-NPBrCl, 4-NPBr, and a 4-NPBr dimer. Less reactive to halogenation was NPEO, which formed only the monochloro and monobromo products, and the least reactive was NPEC. A simple stereochemical model is used to explain halogenation reactivity for the family of 4-NPs and NPEOs at neutral pH. The presence of halogenated 4-NP dimers (bromo and chloro diphenyl ethers) is discussed as a possible source of new endocrine disrupters.     

液相色谱-串联质谱法同时测定婴幼儿配方乳粉中全氟辛酸、全氟辛烷磺酸、双酚A和壬基酚残留

建立了婴幼儿配方乳粉中全氟辛酸、全氟辛烷磺酸、双酚A和壬基酚多残留的高效液相色谱-串联四极杆质谱联用测定方法。样品用水超声溶解,乙腈沉淀蛋白质,液相色谱-串联质谱测定,基质内标法定量。以Hypersil GOLD C₁₈色谱柱（50 mm×4.6 mm,1.9 μm）分离,流动相为30 mmol/L乙酸铵水溶液和甲醇,流速0.30 mL/min。在该优化条件下,全氟辛酸、全氟辛烷磺酸、双酚A和壬基酚的定量限分别为0.5、1.0、10.0和5.0 μg/kg,方法回收率为86.1%~106.8%,相对标准偏差为2.87%~9.53%。测定了多种市售婴幼儿配方奶粉,表明该方法操作简单、测定结果准确,可用于婴幼儿配方奶粉中全氟辛酸、全氟辛烷磺酸、双酚A和壬基酚多残留的同时快速测定。     

多壁碳纳米管修饰金膜塑料电极测定儿童用品中的壬基酚

以廉价的聚对苯二甲酸乙二酯(PET)塑料为基底,采用真空离子溅射技术,制备了一种多壁碳纳米管修饰的可抛式金膜塑料工作电极。通过扫描电镜观察修饰电极的表面形貌,利用循环伏安法对不同修饰状态的电极性能进行表征。在优化实验条件下,应用线性扫描伏安对壬基酚(NP)进行分析。结果表明,壬基酚在0.05~5 mg/L范围内,修饰工作电极的峰电流与壬基酚质量浓度呈良好的线性关系,检出限为0.03 mg/L,加标回收率为92.0%~103%,相对标准偏差(RSD)均小于16%。该可抛式电极可小批量化制备,操作简单,成本低,可防止不同样品对电极表面的交叉污染,应用于塑料样品中壬基酚迁移量的测定,结果满意。     

纳米Ag/ZnO光催化剂及其催化降解壬基酚聚氧乙烯醚性能

采用氨浸法制备了不同Ag负载量的纳米Ag/ZnO光催化剂,并用X射线衍射、比表面积测定、X射线光电子能谱和漫反射紫外-可见光谱测定了Ag/ZnO的晶型结构、比表面积、表面组成和光谱特征.以壬基酚聚氧乙烯醚(NPE-10)为模型污染物,分别在紫外光和可见光照射下考察了纳米Ag/ZnO的光催化活性.结果表明,Ag能成功地负载到ZnO表面,且随着Ag负载量的增加,ZnO的粒径逐渐增大,比表面积逐渐减小.与纳米ZnO样品相比,Ag/ZnO中Ag 3d5/2结合能减小,而Zn 2p和O 1s结合能增大,ZnO表面的羟基氧和吸附氧含量增加.当Ag负载量大于0.5%时,Ag/ZnO样品的吸收光谱发生红移,在可见光区出现吸收.光催化降解结果表明,0.5%Ag/ZnO样品的光催化活性最高,在紫外光和可见光照射3 h后NPE-10降解率分别约为77%和56%,而ZnO样品的光催化活性仅约为61%和40%.     

磁性碳纳米管表面新型壬基酚印迹纳米复合材料制备及吸附性能

采用聚苯胺包覆的磁性多壁碳纳米管为载体,以壬基酚(NP)为模板分子,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂制备新型磁性壬基酚印迹复合萃取材料。 采用扫描电子显微镜(SEM)、红外光谱(FT-IR)和样品振动磁强计(VSM)等技术手段对该磁性印迹复合材料进行表征和分析,结果表明,在磁性碳纳米管表面成功接枝厚度为60~70 nm的印迹聚合层。 采用高效液相色谱(HPLC)技术对该印迹复合材料的吸附性能进行探讨,结果表明,该磁性印迹复合材料对壬基酚具有特异性吸附性能,最大吸附量为38.46 mg/g。 结合HPLC检测技术,该磁性印迹复合材料成功用于分离富集饮用水中的壬基酚。     

壬基酚聚氧乙烯醚二聚和三聚表面活性剂的合成及表面性质

合成了系列壬基酚聚氧乙烯醚二聚表面活性剂(DNP)和三聚表面活性剂(TNP), 用核磁共振、红外光谱和元素分析等手段对其结构进行了表征, 并用表面张力法和稳态荧光法对DNP和TNP的表面性能进行了研究. 结果表明, 随着氧乙烯(EO)单元数的增长, DNP和TNP的临界胶束浓度(cmc)值逐渐增大; DNP和TNP的cmc值较相应的单体壬基酚聚氧乙烯醚表面活性剂(NP)明显降低, 显示了较高的表面活性、吸附能力和润湿能力.