Temporal evolution of Raman intensities on surface-enhanced Raman scattering active copper and gold electrodes at negative potentials

The effect of a roughening procedure on surface-enhanced Raman scattering (SERS) intensity of pyridine at copper and gold electrodes subjected to negative potential has been investigated. Among four procedures tested for a copper electrode the one consisting of electrochemical activation in a solution of LiCl and CuCl₂ resulted in the most stable and effective surface. It was proved that the presence of pyridine during the pretreatment procedure caused a very fast, irreversible decay of SERS intensity for both copper and gold electrodes. Quite stable, at least at room temperatures, gold surfaces were obtained by oxidation-reduction cycles activation in KCl solution.     

Characterization of PEDOT film functionalized with a series of automated synthesis ferrocenyl-containing oligonucleotides

In previous works we have described a fully automated synthesis of new ferrocene labelled oligonucleotides (Fc-ODNs) probes with one or more electroactive markers at different position in the chain. These Fc-ODNs have shown good properties to detect ODN target in solution. Here we describe the post-functionalization of a conducting co-polymer based on ethylenedioxythiophene (EDOT) derivatives by a series of Fc-ODNs. The grafting of the Fc-ODNs probes resulted in the appearance of the ferrocene redox couple which directly confirm the effectiveness of the ODN anchoring compared to traditional approach based on IR spectroscopy and X-ray fluorescence of the films. Moreover, the electrochemical response of the modified electrodes analysed in organic media before and after hybridization with ODN target confirm that properties obtain in solution for Fc-ODNs already exist in the film. The changes in the current intensity were found to be dependant on the structure of the grafted ODN that validate our strategy to synthesize an optimal Fc-ODNs.     

Electroenzymatic reactions with sorbitol dehydrogenase on gold electrodes

Sorbitol dehydrogenase (SDH) originating from recombinant Escherichia coli cells is immobilized on gold electrodes. First of all, (4-carboxy-2,5,7-trinitrofluorenyliden)malon-nitrile (CTFM) is adsorbed on the surface as mediator. In a second step, the cofactor β-nicotinamide adenine dinucleotide (NAD⁺) is immobilized on the gold electrode. Due to the formation of a complex between the mediator and the cofactor, the electron transfer rate can be enhanced by adding calcium ions to the buffer. The immobilization of NAD⁺ and SDH on the surface has been achieved by cross-linking with the glutaraldehyde/bovine serum albumin system. The successful biofunctionalization is monitored by cyclic voltammetry.Paper presented at the “Jahrestagung der Fachgruppe Angewandte Electrochemie der Gesellschaft Deutscher Chemiker, Düsseldorf, 11.-14.09.2005”.     

Oxidase/peroxidase bilayer-modified electrodes as sensors for lactate,pyruvate, cholesterol and uric acid

Enzyme heterobilayer-modified electrodes were fabricated by successively covalently binding to the surface of a tin(IV) oxide plate horseradish peroxidase (HRP), then an oxidase (lactate, pyruvate or cholesterol oxidase or uricase), which liberates hydrogen peroxide by reaction with the respective substrate. The cooperative action of oxidase-HRP leads to an efficient amperometric sensor system with the minimum amount of enzyme immobilized on an electrode.     

Amperometric sensor for hypoxanthine and xanthine based on the detection of uric acid

The construction and response of an immobilized enzyme modified electrode as an amperometric sensor is described. Xanthine oxidase was adsorbed on a carbon paste electrode and physically entrapped with a semipermeable membrane. Uric acid, the product of the enzymatic reaction, was oxidized electrochemically at +0.4 V vs. Ag/AgCl, yielding a steady-state current directly related to the bulk concentration of the substrate. Hypoxanthine and xanthine were determined in the range 5–100 μM at Ph 7.2 with good precision. Interferences are discussed.     

pH值对聚四氨基酞菁钴膜电化学和紫外光谱性质的影响

用循环伏安法在导电玻璃(ITO)和玻碳电极(GC)上制备了聚氨基酞菁钴(CoTAPc)修饰电极(CoTAPc/GC)。探讨了pH值对CoTAPc膜的光谱和电化学性质的影响，发现其氧化还原电位与pH值有线性关系，电催化活性也随酸度的增加而增加。CoTAPc膜的紫外吸收带变化与溶液pH值及在溶液中浸泡时间有关。     

Heterogeneous ECE Processes at Channel Electrodes: Analytical Solution for all Reaction Rate Constants and Different Diffusion Coefficients

An analytical solution is developed for heterogeneous ECE processes occurring at channel electrode surface for both laminar and turbulent flow. The solution explicitly links the behavior of ECE processes and the parameters. A simple expression of the effective number of electrons transferred, covering all the reaction rate constants and different diffusion coefficients of the reactant A and the intermediate product B, is obtained. Excellent agreement with previous numerical and analytical results is shown . Parametric studies illustrate the effects of diffusion coefficients, hydrodynamic factors and reaction rate constants on the effective number of electrons transferred and the currents.     

Electrochemical Preparation of Poly(Malachite Green) Film Modified Nafion‐Coated Glassy Carbon Electrode and Its Electrocatalytic Behavior Towards NADH,Dopamine and Ascorbic Acid

Poly(malachite green) film modified Nafion‐coated glassy carbon electrodes have been prepared by potentiodynamic cycling in malachite green solution. The pH of polymerisation solution has only minor effect on film formation. Electrochemical quartz crystal microbalance (EQCM) was used to monitor the growth of the poly(malachite green) film. Cyclic voltammogram of the poly(malachite green) film shows a redox couple with well‐defined peaks. The redox response of the modified electrode was found to be depending on the pH of the contacting solution. The peak potentials were shifted to a less positive region with increasing pH and the dependence of the peak potential was found to be 56 mV per pH unit. The electrocatalytic behavior of poly(malachite green) film modified Nafion‐coated glassy carbon electrodes was tested towards oxidation of NADH, dopamine, and ascorbic acid. The oxidation of dopamine and ascorbic acid occurred at less positive potential on poly(malachite green) film compared to bare glassy carbon electrode. In the case of NADH, the overpotential was reduced substantially on modified electrode. Finally, the feasibility of utilizing poly(malachite green) film electrode in analytical estimation of ascorbic acid was demonstrated in flow injection analysis.     

New understanding of the nature of OH adsorption on Pt(1 1 1) electrodes

The adsorption of hydroxyl on Pt(1 1 1) single crystal electrodes from aqueous acidic solutions is carefully reinvestigated. The effect of small additions (10⁻⁸–10⁻⁵ M) of chloride and bisulphate anions on the OH adsorption region in perchloric acid solution has been studied. Two regions can be differentiated in the voltammetric profile, that behave differently after the addition of the foreign anion. The initial broad adsorption process is unaffected until the highest concentration is attained. However, the sharper peak at higher potentials is affected even at the lower anion concentration. Since mass transport limitations allow to discard the anion adsorption as the main process giving this peak, we propose that the two processes are due to the dissociative adsorption of two different kinds of water, that are affected by the anion in a different way. From this idea, a new model, based on the Frumkin adsorption isotherm, is proposed, which gives an excellent fit of the experimental results.     

Study of the Behavior of an EC Mechanism Using Cyclic and Derivative Chronopotentiometric Techniques with Spherical Electrodes

The theory for an EC mechanism in chronopotentiometric techniques – reversal chronopotentiometry, cyclic chronopotentiometry and reciprocal derivative chronopotentiometry – is developed. The equations of this article are valid for spherical electrodes of any size and present a compact and easy‐to‐manage form. Methods for determining kinetic parameters of the chemical reaction are proposed and the influence of the electrode radius is discussed. We conclude that large errors in the determination of these parameters are committed if electrode sphericity is neglected. Reciprocal derivative chronopotentiometry has been applied in its traditional form (dt/dE vs. E), and in a more recently proposed modality consisting of plotting dt^1/2/dE vs. E. These techniques are very convenient for studying an EC mechanism since the response is obtained in the form of peaks which are quantitatively related to the kinetic parameters of the chemical reaction. A comparison of the chronopotentiometric methods analyzed leads us to conclude that working curves based on the dt^1/2/dE vs. E curves are more suitable to obtain accurate values of the rate constants of the chemical reaction.