Improved device reliability in organic light emitting devices by controlling the etching of indium zinc oxide anode

A controllable etching process for indium zinc oxide （IZO） films was developed by using a weak etchant of oxalic acid with a slow etching ratio. With controllable etching time and temperature, a patterned IZO electrode with smoothed surface morphology and slope edge was achieved. For the practical application in organic light emitting devices （OLEDs）, a sup- pression of the leak current in the current-voltage characteristics of OLEDs was observed. It resulted in a 1.6 times longer half lifetime in the IZO-based OLEDs compared to that using an indium tin oxide （ITO） anode etched by a conventional strong etchant of aqua regia.     

A Novel Solid‐state Electrochemiluminescent Enantioselective Sensor for Ascorbic Acid and Isoascorbic Acid

A novel, stable, solid‐state and stereoselective electrochemiluminescence (ECL) sensor has been designed to enantioselectively discriminate ascorbic acid (AA) and isoascorbic acid (IAA) by immobilizing Ru(bpy)₃²⁺ (Ru), thiolated β‐cyclodextrin (β‐CD‐SH) and gold/platinum hybrid nanoparticles supported on multiwalled carbon nanotube/silica coaxial nanocables (GP‐CSCN) on glassy carbon electrode. All chemical compounds could be immobilized on the surface of electrode stably through nafion film, and high stereoselectivity could be introduced to the sensor via the synergistic effects of the β‐CD‐SH and GP‐CSCN nanomaterials. When the developed sensor interacted with AA and IAA, obvious difference of ECL intensities was observed, and a larger intensity was obtained from AA, which indicated that this strategy could be employed to enantioselectively recognize AA and IAA. As a result, ECL technique might act as a promising method for recognition of chiral compounds.     

Molecular Size and Electronic Structure Combined Effects on the Electrogenerated Chemiluminescence of Sulfurated Pyrene‐Cored Dendrimers

The electrochemistry, photophysics, and electrochemically generated chemiluminescence (ECL) of a family of polysulfurated dendrimers with a pyrene core have been thoroughly investigated and complemented by theoretical calculations. The redox and luminescence properties of dendrimers are dependent on the generation number. From low to higher generation it is both easier to reduce and oxidize them and the emission efficiency increases along the family, with respect to the polysulfurated pyrene core. The analysis of such data evidences that the formation of the singlet excited state by cation–anion annihilation is an energy‐deficient process and, thus, the ECL has been justified through the triplet–triplet annihilation pathway. The study of the dynamics of the ECL emission was achieved both experimentally and theoretically by molecular mechanics and quantum chemical calculations. It has allowed rationalization of a possible mechanism and the experimental dependence of the transient ECL on the dendrimer generation. The theoretically calculated Marcus electron‐transfer rate constant compares very well with that obtained by the finite element simulation of the whole ECL mechanism. This highlights the role played by the thioether dendrons in modulating the redox and photophysical properties, responsible for the occurrence and dynamics of the electron transfer involved in the ECL. Thus, the combination of experimental and computational results allows understanding of the dendrimer size dependence of the ECL transient signal as a result of factors affecting the annihilation electron transfer.     

Highly efficient regioselective ring openings of N-tosylaziridines to haloamines using ferric(Ⅲ) halides

FeX3（X = Cl, Br） were found to be very effective reagents and powerful catalysts for regioselective ring openings of a variety of N-tosylaziridines with them to afford the corresponding b-haloamines in good to excellent yields with high regioselectivity under mild conditions. At the same time, 13 new compounds were obtained firstly. Moreover, the b-bromoamine prepared could be transferred into b-nitroamine with NaNO2 in moderate yield.     

Cross section of the impact single ionization of B2＋ by H＋

The ionization process of B2+ by H+ impact is studied using the continuum-distorted-wave eikonal-initial-state (CDW-EIS) method and the modified free electron peak approximation (M-FEPA), respectively. Total, single-, and double- differential cross sections from 1s and 2s orbitals are presented for the energy range from 10 keV/u to 10 MeV/u. Comparison between the results from the two methods demonstrates that the total and single-differential cross sections for the high-energy incident projectile case can be well evaluated using the simple M-FEPA model. Moreover, the M-FEPA model reproduces the essential features of the binary-encounter (BE) bump in the double-differential cross sections. Thus, the BE ionization mechanism is discussed in detail by adopting the M-FEPA model. In particular, the double- and single-differential cross sections from the 2s orbital show a high-energy hip, which is different from those from the 1s orbital. Based on Ref. [1], the Compton profiles of B2+ for 1s and 2s orbitals are given, and the hips in DDCS and SDCS from the 2s orbital are explained.     

Allyl phthalazinone synthesis,polymerization and polymer properties

A phthalazinone monomer with an allyl group, i.e. 4-（3-allyl-4-hydroxyphenyl）phthalazin-1（2H）-one, was synthesized and then copolymerized with 4-（4-hydroxylphenyl）（2H）-phthalazin-1-one and 2,6- diflurobenzonitrile by means of aromatic nucleophilic polycondensation to provide a series of crosslinkable poly（aryl ether nitrile）s. The virgin copolymers exhibited good solubility in polar organic solvents with relative high molecular weights （Mw： 45,130-58,403, inherent viscosities： 0.58-0.75 dL/ g）. After cross-linking, the thermal stability and solvent resistance of the polymer increased.     

Nickel-catalyzed cross-coupling reaction of alkynyl bromides with Grignard reagents

We describe a convenient method for the synthesis of 1,2-disubstituted acetylenes via a cross-coupling reaction of （bromoethynyl）benzene with Grignard reagents. The reaction of （bromoethynyl）benzene （1 mmol） with Grignard reagent （1.3 mmol） mediated by NiCl2 （4 mol%） and （p-CH3Ph）3P （8 mol%） in THF could produce 1,2-disubstituted acetylenes in good yields at room temperature.     

Synthesis and antibacterial activity of ethyl 2-amino-6-methyl-5-oxo- 4-aryl-5,6-dihydro-4H-pyrano[3,2-c]quinoline-3-carboxylate

The three-component reaction of 4-hydroxy-1-methyl-2(1H)-quinolinone, aromatic aldehydes and ethyl cyanoacetate was carried out in the presence of a catalytic amount of 4-dimethyl aminopyridine(DMAP) in aqueous ethanol. The reactions result in the formation of pyranoquinoline derivatives in excellent yields. Antibacterial activity has been evaluated against Gram positive and Gram negative bacteria for some of the synthesized compounds. The results indicated that these compounds are moderately effective against bacterial growth and their effectiveness is highest against Pseudomonas aeruginosa.     

Electrochemical sensor based on f-SWCNT and carboxylic group functionalized PEDOT for the sensitive determination of bisphenol A

A simple,sensitive,and reliable method for the voltammetric determination of bisphenol A(BPA) by using carboxylic group functionalized single-walled carbon nanotubes(f-SWCNT)/carboxylic-functionalized poly(3,4-ethylenedioxythiophene)(PC4) complex modified glassy carbon electrode(GCE) has been successfully developed.The electrochemical behavior of BPA at the surface of the modified electrode is investigated by electrochemical techniques.The cyclic voltammetry results show that the as-prepared electrode exhibits strong catalytic activity toward the oxidation of BPA with a well-defined anodic peak at 0.623 V in PBS(0.1 mol/L,pH 7.0).The surface morphology of the 3D network of composite film is beneficial for the adsorption of analytes.Under the optimized conditions,the oxidation peak current is proportional to BPA concentration in the range between 0.099 and 5.794 μmol/L(R~2 = 0.9989),with a limit of detection of 0.032 μmol/L(S/N = 3).The enhanced performance of the sensor can be attributed to the excellent electrocatalytic property of/-SWCNT and the extraordinary conductivity of PC4.Furthermore,the proposed modified electrode displays high stability and good reproducibility.The good result on the voltammetric determination of BPA also indicates that the asfabricated modified electrode will be a good candidate for the electrochemical determination and analysis of BPA.