Thermal characterization of bismaleimide blends

4,4-bismaleimidophenyl methane (BM) and 3,3-bismaleimidophenyl sulfone (BS) were blended in solution using weight ratios 31 (MS31), 21 (MS21), 11 (MS11), 12 (MS12) and 13 (MS13). Chain extended bismaleimide resins were also prepared by treating BS/BM with 4,4-diaminodiphenyl ether in molar ratios of 10.3 (BM-E and BS-E resins). These resins were also blended with bismaleimides and the curing characteristics were evaluated by differential scanning calorimetry. Increase in BM content in BMBS blends or increase in chain extended bismaleimide content in BM-EBS or BS-E BM blends resulted in a reduction of melting and curing temperatures. Indication about the extent of cross-linking was obtained from solubility measurements (in DMF) of isothermally cured resins (180 °C, lh and 220 °C, lh in an air oven). Thermogravimetric analysis of samples isothermally cured at 180 °C and 220 °C (lh each) was carried out in nitrogen atmosphere. Improvement in thermal stability of chain extended bismaleimides was observed on blending.

---

Zusammenfassung 4,4-Bismalimidophenyl-methan (BM) und 3,3-Bismalimidophenyl-sulfon (BS) wurden in Lösung in den Gewichtsverhältnissen 31 (MS31), 21 (MS21), 11 (MS11), 12 (MS12) und 13 (MS13) gemischt. Auch kettenpolymerisierten Bismalimid-Harze wurden durch Behandlung von BS/BM mit Diaminodiphenylether im Molverhältnis 10,3 dargestellt (BM-E- und BS-E-Harze). Die Kennwerte der Aushärtung von Mischungen dieser Harze mit den Bismalimiden wurden mittels DSC ermittelt. Eine Erhöhung des BM-Gehaltes in den BM BS-Mischungen oder des Gehaltes der BM-E BS oder BS-E-Mischungen an kettenpolymerisierten Bismalimiden führt zu einer Erniedrigung der Schmelz- und Aushärtetemperaturen. Hinweise über den Vernetzungsgrad wurden aus Löslichkeitsmessungen (in DMF) von Isotherm (je 1 Stunde bei 180 und 220 °C in Luft) gehärteten Harzen erhalten. Die thermogravimetrische Analyse der Isotherm bei 180 bzw. 220 °C 1 Stunde ausgehärteten Proben wurde in Stickstoffatmosphäre ausgeführt. Die thermische Stabilität der Bismalimide wird durch Verschneiden verbessert.

---

4,4-- () 3,3-- () 31 (MC 31), 21 (MC 21), 11 (MC 11), 12 (MC 12) 13 (MC13). - / 4,4- 10,3 ( - C-). - . - - - - , . ( 1 180 220°) . . - .

---

---

The financial assistance provided by Department of Science and Technology is gratefully acknowledged.     

PHOTOPEROXIDATION OF LENS LIPIDS: PREVENTION BY VITAMIN E

Abstract— Light of visible frequency was observed to initiate peroxidative degradation of lipids of rat lenses when the latter were maintained in organ culture. The extent of degradation was monitored by measurement of malanaldehyde. This photodegradative process, which we believe is triggered by light catalyzed generation of superoxide and its subsequent transformation to other potent oxidants. was observed to be thwarted substantially if the medium of organ culture was fortified with 10⁻³ and 10⁷ M vitamin E (α-tochopherol). These studies suggest that vitamin E may be metabolically beneficial by protecting light exposed tissues, such as those in the eye against photoperoxidativc damage concomitant to light-catalyzed generation of oxygen-free radicals. The findings appear relevant to age-associated pathogenesisof cataracts and their possible attenuation. In addition, they provide a basis of pathogenesis in other ocular tissues such as the macula known to undergo age-dependent degeneration.     

Effect of Phosphorus Content on Thermal Behaviour of Diglycidyl Ether of Bisphenol-A/phosphorus Containing Amines

Curing of diglycidyl ether of bisphenol-A (DGEBA) with phosphorus containing amide amines i.e. bis[3(3’-aminobenzamido phenyl)]methyl phosphine oxide (MB),bis[3(4’-aminobenzamido phenyl)]methyl phosphine oxide (PB), tris[3(3’-aminobenzamidophenyl)] phosphine oxide (MT) and tris[3(4’-aminobenzamido phenyl)] phosphine oxide (PT)and conventionally used curing agent 4,4’-diaminodiphenyl sulfone (D) was studied by DSC. The amines MB, PB, MT and PT were synthesised in the laboratory and were characterized by determining elemental composition, melting point, and amine equivalent. Structural characterization was done by ¹H-NMR and FTIR. The onset temperature of curing depended on the nucleophilicity of the amines and was in the orderMT≈MB<PT<PB<D. The exothermic peak temperatures were in the orderD>PB>PT>MT≈MB. The char residue of cured epoxy resin was significantly higher when phosphorus was incorporated in the cured network. Using mixed amine formulations based on amine D and P-containing amines and the molar ratio of these amines could easily control the curing characteristics. A linear relationship between char yield and P-content was observed in such formulations. This revised version was published online in August 2006 with corrections to the Cover Date.     

On theC p toC v conversion of solid linear macromolecules II

A modification is proposed for the Nernst-Lindemann equation that is used to convert calculated heat capacities at constant pressure (C _p ) to heat capacities at constant volume (C _v ) for solid, linear macromolecules. the constant A₀ per mole of repeating unit in this equation is derived by taking into account the variable number of vibrators excited at different temperatures. With the new equation it is possible to calculateC _p for solid polymers over a wider temperature range. The constant is calculated for solid polymers from experimental thermal expansivity, isothermal compressibility and heat capacity data obtained from the literature. An average value of (3.9±2.4)×10^–3(K mol)/J was obtained for A₀ (new) from data on 22 solid polymers. This average value may be used as a universal constant in case no experimental data on compressibility and expansivity are available for computation ofA ₀. The remaining variation of A₀ (new) with temperature is discussed and example calculations are shown for polyethylene. Effects of premelting and possibly large-amplitude motion are discovered for polyethylene in the temperature range 290 to 410 K.

---

Zusammenfassung Es wurde eine Abänderung der Nernst-Lindemann Gleichung vorgeschlagen, mit deren Hilfe für feste, lineare Makromoleküle errechnete Wärmekapazitäten bei konstantem Druck (C _p ) in Wärmekapazitäten bei konstantem Volumen (C _p ) umgerechnet werden können. Zur Ableitung der molaren Konstanten A₀ in dem sich wiederholenden Teil der Gleichung wurde die variable Anzahl der erregten Schwinger bei verschiedenen Temperaturen berücksichtigt. Mit der neuen Gleichung wird es möglich, dieC _p fester Polymere für einen breiten Temperaturbereich zu errechnen. Die Konstante wurde für die festen Polymere auf Grund des ermittelten thermischen Ausdehnungsvermögens und der isothermen Kompressibilität sowie der der Literatur entnommenen Wärmekapazitätsangaben berechnet. Aus Angaben von 22 festen Polymeren wurde für A₀(neu) ein Durchschnittswert von (3,9±2,4)×10^–3 (K mol)/J erhalten. Verfügt man zur Berechnung von A₀ über keine experimentellen Werte für Kompressibilität und Ausdehnungsvermögen, so kann dieser durchscnittswert als universale Konstante angewendet werden. Die verbleibende Temperaturabhängigkeit von A₀(neu) wird besprochen und Beispielrechnungen für Polyäthylen gegeben. Für Polyäthylen wurden im Temperaturbereich 290 bis 410 K Effekte durch Vorschmelzen und Bewegungen mit großer Amplitude festgestellt.

---

-, (C _p ) (C _v ) , . A ₀ , . C _p . A ₀ , , . 22 , A ₀ () (3,9±2,4)· 10^–3 ·/. A ₀ . A ₀ , . 290–410 .

     

A theoretical study of aqueous solvation of K comparing ab initio, polarizable, and fixed-charge models

The hydration of K(+) is studied using a hierarchy of theoretical approaches, including ab initio Born-Oppenheimer molecular dynamics and Car-Parrinello molecular dynamics, a polarizable force field model based on classical Drude oscillators, and a nonpolarizable fixed-charge potential based on the TIP3P water model. While models based more directly on quantum mechanics offer the possibility to account for complex electronic effects, polarizable and fixed-charges force fields allow for simulations of large systems and the calculation of thermodynamic observables with relatively modest computational costs. A particular emphasis is placed on investigating the sensitivity of the polarizable model to reproduce key aspects of aqueous K(+), such as the coordination structure, the bulk hydration free energy, and the self diffusion of K(+). It is generally found that, while the simple functional form of the polarizable Drude model imposes some restrictions on the range of properties that can simultaneously be fitted, the resulting hydration structure for aqueous K(+) agrees well with experiment and with more sophisticated computational models. A counterintuitive result, seen in Car-Parrinello molecular dynamics and in simulations with the Drude polarizable force field, is that the average induced molecular dipole of the water molecules within the first hydration shell around K(+) is slightly smaller than the corresponding value in the bulk. In final analysis, the perspective of K(+) hydration emerging from the various computational models is broadly consistent with experimental data, though at a finer level there remain a number of issues that should be resolved to further our ability in modeling ion hydration accurately.     

Antibacterial and wound healing activities of silver nanoparticles embedded in cellulose compared to other polysaccharides and protein polymers

Cellulose - The aggregation of silver nanoparticles (AgNPs) in colloidal solution and the oxidative cytotoxicity towards human cells are two major hindrances for their thriving medicinal...     

Biodegradation of Phenol by the Yeast Candida tropicalis: An Investigation by NMR Spectroscopy

The process of phenol biodegradation by the yeast Candida tropicalis NCIM 3556 in aqueous medium was studied by ¹H, ¹³C, and DOSY NMR techniques. Samples at regular intervals were centrifuged to separate the cells, and ¹H spectral data were collected at 400 MHz. Though a gradual decrease in the concentration of phenol was observed, after an incubation period of ~8 h, formation of any intermediate products could not be detected. Experiments carried out with uniformly ¹³C-labeled phenol also failed to detect formation of any carboxylic acid intermediates during degradation. The studies indicated that the phenol was completely degraded to carbon dioxide and water in approximately 20 h. Self-diffusion coefficient measurements showed that the lifetime of phenol in the bound form is too small to impart any change in its diffusion behavior and the intermediates formed are converted to carbon dioxide and water at a very fast rate.     

Ionic liquid‐based dispersive liquid–liquid microextraction followed by RP‐HPLC determination of saquinavir in rat serum: application to pharmacokinetics

An ionic liquid‐based dispersive liquid–liquid microextraction followed by RP‐HPLC determination of the most commonly prescribed protease inhibitor, saquinavir, in rat plasma was developed and validated. The effects of different ionic liquids, dispersive solvents, extractant/disperser ratio and salt concentration on sample recovery and enrichment were studied. Among the ionic liquids investigated, 1‐butyl‐3‐methylimidazolium hexafluorophosphate was found to be most effective for extraction of saquinavir from rat serum. The recovery was found to be 95% at an extractant/disperser ratio of 0.43 using 1‐butyl‐3‐methylimidazolium hexafluorophosphate and methanol as extraction and dispersive solvents. The recovery was further enhanced to 99.5% by addition of 5.0% NaCl. A threefold enhancement in detection and quantification limits was achieved, at 0.01 and 0.03 µg/mL, compared with the conventional protein precipitation method. A linear relationship was observed in the range of 0.035–10.0 µg/mL with a correlation coefficient (r²) of 0.9996. The method was validated and applied to study pharmacokinetics of saquinavir in rat serum. Copyright © 2014 John Wiley & Sons, Ltd.     

Thermal properties of bisitaconimide and bisbenzoxazine blends

Blends of cardanol-based bisbenzoxazine (BZc) and 4,4′-bisitaconimidodiphenyl ether (BIM) having nine different mass ratios (i.e. 100:0, 90:10, 75:25, 60:40, 50:50, 40:60, 25:75, 10:90 and 0:100) were prepared and their curing behaviour was studied by differential scanning calorimetry (DSC) and fourier transform infrared spectroscopy. A curing mechanism comprising two-steps: (1) homopolymerization and co-curing reaction of itaconimide with alkyl side chain double bonds of cardanol BZc at lower temperature (~443 K) and (2) ring-opening polymerization of oxazine at higher temperature (~453–483 K) has been proposed. The T _g of the cured resin blends was determined by DSC and the increase in BIM content in the blend resulted in an increase in T _g from 408 K BZc to 474 K BIM. Increase in bisitaconimide content resulted in improvement of char yield at 1,073 K as well as an increase in mass loss temperatures (5 and 10 %). Compared to BZc, the blends showed a higher thermal stability. The lap shear strength of these blends in metal–metal joints was investigated at 323, 523 and 573 K.