Potentiometric and Thermodynamic Studies of Some Metal–Cysteine Complexes

A new and simple potentiometric method is developed to determine the stability constants of cysteine complexes with Mn(II), Cu(II), Zn(II), Cd(II), and Ce(III) metal ions using a modified Bjerrum method. Potentiometric titrations were performed in water and water/dioxane mixtures at five different temperatures. The least and highest stable complexes were those of Cu(II) and Zn(II), respectively. Furthermore, by conducting the experiments at temperatures of 15, 20, 25, 35, and 45 °C, the thermodynamic parameters ΔH°, ΔS°, and ΔG° for the pertinent complexes were calculated. The results show that the ΔH° values of the complexes are positive except for Zn(II). Negative values of ΔG° are evidence for the spontaneity of the reactions.     

海藻酸-磷脂微囊复合水凝胶的制备、表征及毒理学分析

采用薄膜分散法合成磷脂微囊,根据胶粒的双电层理论,通过在微囊中加入氯化锰、氯化钙和氯化镁电解质溶液,使微囊处于相对稳定的状态.研究发现加入氯化锰和氯化钙溶液,微囊胶体的粒径没有明显的变化,但加入一定浓度氯化镁溶液,其粒径明显变大.为了进一步增加磷脂微囊稳定性,将氯化锰、氯化钙、氯化镁磷脂微囊胶体分别与海藻酸钠(SA)溶液混合.结果表明,氯化镁与SA几乎不能形成水凝胶,氯化钙与SA形成水凝胶能力强于氯化锰.微囊胶体溶液中的磷脂酰丝氨酸(PS)可以与Ca~(2+)和Mg~(2+)键合形成PS-Ca~(2+)和PS-Mg~(2+),但不能与Mn~(2+)键合形成PS-Mn~(2+).对氯化钙磷脂微囊与海藻酸钠合成的复合水凝胶的形貌、溶胀率及细胞毒性进行了表征,结果表明,氯化钙与SA形成的水凝胶可以捕获胶体中磷脂微囊,且形貌规整,结构稳定,无细胞毒性.     

Synthesis and thermodynamic studies of the dinuclear adducts between dimethyltin(IV) dichloride with SalenH2 and MII(Salen) complexes in chloroform

A UV-Vis spectrophotometric study of adduct formation of SalenH₂ (1) and M^II(Salen), where M?=?Mn (2), Fe (3), Co (4), Ni (5) and Cu (6) as donors with Me₂SnCl₂ as acceptor have been investigated in chloroform. Adducts (1a–6a) have been characterized by ¹H, ¹³C and ¹¹⁹Sn NMR, IR and electronic spectroscopy and microanalysis. Formation constants and thermodynamic parameters were measured for 1 : 1 and 2 : 1 adducts at various temperatures (T?=?278 to 308 K). The data refinement was carried out with the SQUAD 84 program. The trend of formation constants of M^II(Salen) complexes with Me₂SnCl₂ follows the order: Mn>Fe>Cu>Co>Ni. The formation constants for the free 1 and M^II(Salen) with Me₂SnCl₂ changes according to the following trend: M^II(Salen)>SalenH₂     

Density,viscosity and thermodynamic activation for viscous flow of water+sulfolane

Densities and viscosities for the system, water (W)?+?sulfolane (SFL), have been determined for the entire range of composition at temperatures ranging from 303.15 to 323.15?K. Density, excess molar volume, viscosity, excess viscosity and thermodynamic activation parameters for viscous flow have been calculated and plotted against the mole fraction of SFL. The measured properties and some of the derived properties have been fitted to appropriate polynomial equations. These have been explained in terms of such factors, as, dipole–dipole interaction, partial accommodation of water molecules into the structural network of SFL and H-bonding between SFL and H₂O.     

Kinetic and thermodynamic studies on the adsorption behavior of Rhodamine B dye on Duolite C-20 resin

The adsorption behavior of Rhodamine B dye from aqueous solutions was investigated onto the cation-exchange resin, Duolite C-20 (hydrogen form). The effects of various experimental factors; sorbent amount, contact time, dye concentration and temperature, were studied by using the batch technique. Lagergren pseudo-first-order equation shows good applicability with high correlation coefficients for all ranges of initial dye concentrations and at different temperatures. This equation was used to describe the kinetics of the dye adsorption process. The adsorption constants were evaluated by using both the Langmuir and Freundlich adsorption isotherm models. Thermodynamic parameters were obtained and it was found that the adsorption of Rhodamine B dye onto Duolite C-20 resin was an endothermic and spontaneous process at the temperatures under investigation.     

Adsorption of Metanil Yellow Azoic Dye from Aqueous Solution onto Mg‐Fe‐NO3 Layered Double Hydroxide

We report the preparation and characterization of a layered double hydroxide (LDH) adsorbent for azoic dye, metanil yellow (yellow GX; YGX) removal. The nanoparticles of Mg‐Fe‐LDH‐NO₃ adsorbent were prepared with Mg/Fe molar ratio of 3:1 by a hydrothermal process and coprecipitation method at pH 9.5 and were characterized by X‐ray powder diffraction (XRPD), thermal gravimetric analysis (TGA), elemental analysis, and Fourier transform infrared spectroscopy (FT‐IR). The size and morphology of nanoparticles were examined by scanning electron microscopy (SEM). The XRD patterns indicate that the intercalation of YGX between the LDH layers has not occurred and surface adsorption has happened. In the adsorption experiments, the Gibbs free energy ΔG⁰ values, the enthalpy ΔH⁰, and entropy ΔS⁰ was determined. The isotherms showed that the adsorption of YGX by Mg‐Fe‐LDH‐NO₃ was both consistent with Langmuir and Freundlich equations.     

Molecular dynamics comparative study of methane–nitrogen and methane–nitrogen–ethane systems

This work concerns the site–site interaction study of 256 particles using the Buckingham potential model. We have calculated the new parameters of the Buckingham potential using an iterative algorithm with a mean square method. This adapted model allows determining the characteristics for each state point. We have applied this model to study the liquefied natural gas LNG properties for methane-nitrogen and methane–nitrogen–ethane mixtures by molecular dynamics. We have calculated the thermodynamic, dynamic and structural properties for both the microcanonical NVT and the isothermal-isobaric NPT ensembles of binary and ternary systems from the SP₁ to SP₉ points. Then, we have compared the results between binary and ternary systems. We have obtained a good prediction on transport properties. From the calculated values of self-diffusion coefficient and viscosity, we have confirmed the liquid state of the liquefied natural gas LNG system.     

Gas hydrate equilibria for CO2-N2 and CO2-CH4 gas mixtures—Experimental studies and thermodynamic modelling

In this paper, a set of experimental data on the phase equilibrium of gas hydrates in the presence of binary gas mixtures comprising CO₂ is presented. The procedure established allows for the determination of both the composition of the gas phase as well as the hydrate phase without the need to sample the hydrate. The experimental results obtained in these measurements have been described by means of the classical model of van der Waals and Platteeuw. The values of internal parameters of the reference state and the Kihara parameters have been re-discussed and their interdependency is pointed. Finally the new set of parameters is validated against experimental data from other sources available in the literature, or invalidated against other sources. Finally, we conclude on the difference of experimental data between laboratories. The differences are not on the classical (pressure, temperature, gas composition) data which appear equivalent between laboratories. The difference stands on the measurement composition of the hydrate phase.     

Chromatographic study of four sesquiterpenoids in volatile oil of Curcumae Rhizoma on reverse phase stationary phase with methyl-β-cyclodextrin as mobile additive

Abstract

The elution behavior of four sesquiterpenoids in volatile oil of Curcumae Rhizoma on reverse-phase high-performance liquid chromatography with methyl-β-cyclodextrin as mobile phase additive was studied, including germacrone, curzerene, furanodiene, and β-elemene. Stoichiometric ratio and apparent formation constants of inclusion complex formed by methyl-β-cyclodextrin and each analyte were calculated by varying the concentration of the additive in the mobile phase composed of methanol and water (90:10, v/v), in which the association constant for inclusion complex formed by the organic modifier methanol and methyl-β-cyclodextrin was also determined. Results showed that the stoichiometric ratio of all the inclusion complex was 1:1 when 0–9?mmol L^?1 of methyl-β-cyclodextrin was added in the mobile phase. Unusual retention behavior of the analyte germacrone was found, which was further investigated by the calculation of thermodynamic parameters. Meanwhile, enthalpy and entropy of the inclusion complexes and solute-stationary phase interactions were determined by linear van’t Hoff plots.     

Phase transition and thermodynamic properties of Sr under high pressure

We have performed the first-principles and classical molecular dynamics simulations to investigate the phase diagram and thermodynamic properties of Sr under high pressure and temperature. The obtained solid phase diagram of Sr, based on the quasi-harmonic approximation (QHA), is greatly supported by the available experimental data under low pressure. From the coexistence-phase molecular dynamics simulations, we also obtained the high-pressure melting curve of Sr which shows good agreement with the experiment. While, the experimentally observed β-Sn structure of Sr-III was found to be mechanically unstable according to our phonon dispersion calculations and evolutionary algorithm structure searches. We find that α-U phase (space group Cmcm) is energetically favorable and is the good candidate of Sr-III.