Adsorption of 4‐Chloro‐2‐methylphenoxy Acetic Acid (MCPA) from Aqueous Solution onto Cu‐Fe‐NO3 Layered Double Hydroxide Nanoparticles

The nanoparticles of Cu‐Fe‐NO₃ layered double hydroxide (LDH) were prepared with Cu/Fe molar ratio of 2:1 by a thermal process and co‐precipitation method at pH 9 and were characterized by X‐ray powder diffraction (XRPD), thermal gravimetric analysis (TGA), atomic adsorption spectroscopy (AAS) and fourier infrared spectroscopy (FT‐IR). The size and morphology of nanoparticles were examined by transmission electron microscopy (TEM). Cu‐Fe‐NO₃‐LDH was studied as a potential adsorbent of the acid herbicide MCPA [(4‐chloro‐2‐methylphenoxy) acetic acid] as function of pH, contact time and temperature. The results showed high and rapid adsorption of MCPA on the LDH. The characterization of the adsorption products by XRD indicates that the intercalation of MCPA between the LDH layers has not occurred and surface adsorption has happened. The adsorption kinetic was tested for pseudo‐first‐order, pseudo‐second‐order, elovich and intra‐particle diffusion kinetic models and rate constants were calculated. Freundlich and Langmuir isotherm models were applied to experimental equilibrium data obtained from the measurements of pesticide adsorption. Langmuir isotherm slightly better fitted to the experimental data than that of Freundlich. In the adsorption experiments, the Gibbs free energy ΔG⁰ values, the enthalpy ΔH⁰, and entropy ΔS⁰ were determined.     

Removal of sulfate from wastewater via synthetic Mg–Al layered double hydroxide: An adsorption,kinetics, and thermodynamic study

Sulfate-contaminated water is a major environmental problem that alters the taste of water, disturbs the digestive systems of animals and humans, and erodes both soil and metals. In this study, the layered double hydroxide LDH 4Mg2Al·NO₃ and LDH 8Mg2Al·NO₃ were prepared using a co-precipitation technique, and applied in the adsorption of SO₄^2- from an aqueous solution. The reaction is well described by the Langmuir adsorption model. LDH 4Mg2Al·NO₃ and LDH 8Mg2Al·NO₃ afforded maximum SO₄^2- adsorption values of 135.14 and 92.59 ​mg/g, respectively. The reaction is best explained by a pseudo-second-order mechanism, which suggests that chemisorption is the rate-determining step. The activation energies of LDH 4Mg2Al·NO₃ and LDH 8Mg2Al·NO₃ indicate that the adsorption of SO₄^2- on synthetic LDHs predominantly follows an anion-exchange mechanism, wherein SO₄^2- ions in the aqueous medium replaces intercalated NO₃^- ions in the synthetic LDHs. The thermodynamic parameters (ΔH̊, ΔS̊, and ΔG̊) were also calculated. The reaction was endothermic, and the synthetic LDHs afforded feasible and spontaneous adsorption of SO₄^2-.     

Ceramic Filter Balls Loaded with α-Fe2O3 and Their Application to NH3-N Wastewater Treatment

Hydrolysis reaction of Fe(NO₃)₃ at a high temperature in the presence of urea as the homogeneous precipitant was studied. With the prepared ceramic filter balls loaded with α-Fe₂O₃ after high temperature calcination, the loading of α-Fe₂O₃ on the porous ceramic filter balls from Fe(NO₃)₃ solutions of different concentrations and mechanical stability of the loaded α-Fe₂O₃ were studied. The product was characterized using XRD and SEM. Adsorption experiments were conducted to evaluate the performance of the product in adsorbing NH₃-N. It turned out that the specific surface area of the ceramic filter balls loaded with α-Fe₂O₃ had increased to 36.5387 m²/g from original 4.6127 m²/g. When the concentration of Fe(NO₃)₃ was 0.40 mol/L, the loading of α-Fe₂O₃ on the ceramic filter balls accounted for 8.4% of the total mass of the adsorbent and α-Fe₂O₃ was adsorbed on the filter balls very well. The adsorption isotherm of NH₃-N on the ceramic filter ball adsorbent loaded with α-Fe₂O₃ was of Langmuir type. The saturated adsorption capacity was 3.33 mg/L, and the adsorption constant K was 0.1873. NH₃-N was adsorbed by α-Fe₂O₃ more easily, which was a kind of specific adsorption.     

Sorption of Pb(Ⅱ) on Mg-Fe Layered Double Hydroxide

Mg‐Fe layered double hydroxide (LDH) with a Mg/Fe molar ratio of 3:1 was synthesized by using a coprecipitation method and the sorption removal of Pb(II) by the LDH sample from Pb(NO₃)₂ solution was investigated. It was found that Mg‐Fe LDH showed a good sorption ability for Pb(II) from Pb(NO₃)₂ solution, indicating that the use of LDH as a promising inorganic sorbent for the removal of heavy metal ions is possible. The sorption kinetics and the sorption isotherm of Pb(II) on the LDH sample obeyed the pseudo‐second order kinetic model and Aranovich‐Donohue equation, respectively. The sorption mechanism of Pb(II) on the LDH may be attributed to the surface‐induced precipitation and the chemical binding adsorption, and the removal ability arising from the surface‐induced precipitation is much higher than that from the chemical binding adsorption.     

Thermodynamics of Hydrogen Adsorption on Metal‐Organic Frameworks

Interaction between adsorbed hydrogen and the coordinatively unsaturated Mg²⁺ and Co²⁺ cationic centres in Mg‐MOF‐74 and Co‐MOF‐74, respectively, was studied by means of variable‐temperature infrared (VTIR) spectroscopy. Perturbation of the H₂ molecule by the cationic adsorbing centre renders the H? H stretching mode IR‐active at 4088 and 4043 cm^?1 for Mg‐MOF‐74 and Co‐MOF‐74, respectively. Simultaneous measurement of integrated IR absorbance and hydrogen equilibrium pressure for spectra taken over the temperature range of 79–95 K allowed standard adsorption enthalpy and entropy to be determined. Mg‐MOF‐74 showed ΔH⁰=?9.4 kJ mol^?1 and ΔS⁰=?120 J mol^?1 K^?1, whereas for Co‐MOF‐74 the corresponding values of ΔH⁰=?11.2 kJ mol^?1 and ΔS⁰=?130 J mol^?1 K^?1 were obtained. The observed positive correlation between standard adsorption enthalpy and entropy is discussed in the broader context of corresponding data for hydrogen adsorption on cation‐exchanged zeolites, with a focus on the resulting implications for hydrogen storage and delivering.     

Surface‐initiated atom transfer radical polymerization of a new rhodanine‐based monomer for rapid magnetic removal of Co(II) ions from aqueous solutions

The present study reports synthesis and characterization of a new acrylamide‐based monomer containing rhodanine moiety, N‐3‐amino‐thiazolidine‐4‐one‐acrylamide (ATA). Poly(ATA)‐grafted magnetite nanoparticles (poly(ATA)‐g‐MNPs) were prepared using surface‐initiated atom transfer radical polymerization of the monomer on Fe₃O₄ nanoparticles. The grafted nanoparticles were characterized by Fourier transform infrared analysis, scanning electron microscopy, X‐ray diffraction, and vibrating sample magnetometry. The amount of the grafted polymer was 209 mg g⁻¹, as calculated from thermogravimetric analysis experiment. The capability of poly(ATA)‐g‐MNPs to remove Co(II) cations was shown under optimal conditions of contact time, pH, adsorbent dosage, and initial Co(II) concentration. About 86% of the Co(II) cations were removed over 7 minutes. The adsorption kinetics obeyed the pseudo–second‐order kinetic equation, and the Langmuir isotherm model best described the adsorption isotherm with a maximum adsorption capacity of 3.62 mg g⁻¹. The thermodynamic investigation showed spontaneous nature of the adsorption process (ΔG = −2.90 kJ mol⁻¹ at 25°C ± 1°C). In addition, the poly(ATA)‐g‐MNPs were regenerated by simply washing with an aqueous 0.1M HCl solution. The study of the reusability of the prepared magnetic sorbent revealed that the sorbent can be reused without a significant decrease in the extraction efficiency and be recovered by 95.4% after 7 cycles. These findings suggest that the grafted nanoparticles are stable and reusable adsorbent and can be potentially applied to water treatment in efficient removal of Co(II) cations.     

Adsorption of acid red 114 and reactive black 5 in aqueous solutions on dendrimer‐conjugated magnetic nanoparticles

The adsorption of the dyes Acid Red 114 and Reactive Black 5 in aqueous solutions on polyhydroxyl dendrimer magnetic nanoparticles (Fe₃O₄@SiO₂‐TRIS) was studied in a batch system. The Fe₃O₄@SiO₂‐TRIS NPs were characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, and transmission electron microscopy. Experiments were performed under different conditions such as the initial dye concentration, adsorbent dose, and pH. The pseudo‐second‐order model provided a very good fit for the two anionic dyes. The Langmuir and Freundlich adsorption models were used to describe the equilibrium isotherms at different temperatures, and the former agreed very well with the experimental data. However, the adsorption capacity of Fe₃O₄@SiO₂‐TRIS NPs was reduced during surface modification, which could be due to the dye occupying the binding sites of the dendrimer. Thermodynamic parameters, namely the change in free energy (ΔG⁰), enthalpy (ΔH⁰), and entropy (ΔS⁰), were also determined.     

4-硝基苯甲醇的低温热容和标准摩尔生成焓

用精密自动绝热量热计测定了4-硝基苯甲醇（4-NBA）在78 ~ 396 K温区的摩尔热容。其熔化温度、摩尔熔化焓及摩尔熔化熵分别为:(336.426 ± 0.088) K, (20.97 ± 0.13) kJ×mol-1 和 (57.24 ± 0.36) J×K-1×mol-1.根据热力学函数关系式,从热容值计算出了该物质在80 ~ 400 K温区的热力学函数值 [HT - H298.15 K] 和[ST - S298.15 K]. 用精密氧弹燃烧量热计测定了该物质在T＝298.15 K的恒容燃烧能和标准摩尔燃烧焓分别为 (C7H7NO3, s)＝- ( 3549.11 ± 1.47 ) kJ×mol-1 和 (C7H7NO3, s)＝- ( 3548.49 ± 1.47 ) kJ×mol-1. 利用标准摩尔燃烧焓和其他辅助热力学数据通过盖斯热化学循环, 计算出了该物质标准摩尔生成焓 (C7H7NO3, s)＝- (206.49 ± 2.52) kJ×mol-1 .     

Thermodynamics of Carbon Dioxide Adsorption on the Protonic Zeolite H‐ZSM‐5

Adsorption of carbon dioxide on H‐ZSM‐5 zeolite (Si:Al=11.5:1) was studied by means of variable‐temperature FT‐IR spectroscopy, in the temperature range of 310–365 K. The adsorbed CO₂ molecules interact with the zeolite Brønsted‐acid OH groups bringing about a characteristic red‐shift of the O? H stretching band from 3610 cm^?1 to 3480 cm^?1. Simultaneously, the ν₃ mode of adsorbed CO₂ is observed at 2345 cm^?1. From the variation of integrated intensity of the IR absorption bands at both 3610 and 2345 cm^?1, upon changing temperature (and CO₂ equilibrium pressure), the standard adsorption enthalpy of CO₂ on H‐ZSM‐5 is ΔH⁰=?31.2(±1) kJ mol^?1 and the corresponding entropy change is ΔS⁰=?140(±10) J mol^?1 K^?1. These results are discussed in the context of available data for carbon dioxide adsorption on other protonic, and also alkali‐metal exchanged, zeolites.     

Studies on Mechanochemical Method to Synthesize LDH Nanoparticles

Magnesium‐ferrum layered double hydroxide (Mg‐Fe‐LDH) and zinic‐aluminum layered double hydroxide (Zn‐Al‐LDH) compounds were prepared through a mechanochemical method. The influence of molar ratio of M²⁺ to M³⁺ (R value) on the property of LDH nanoparticles has been studied and the results showed that R=3:1 is the optimum value for the both samples. Besides pure water, the mixture of water and ethanol with the volume ratio of 3:1 is also used to wash the precipitates and used as suspending agent during the peptization process and our results showed that the addition of ethanol can improve the monodispersity of LDH nanoparticles greatly.     

Synthesis and characterization of antibacterial chromium iron oxide nanoparticle‐loaded activated carbon for ultrasound‐assisted wastewater treatment

The aim of this study was to evaluate the surface adsorption capacity of CrFeO₃ nanoparticle‐loaded activated carbon (CrFeO₃‐NPs–AC) for the removal of a cationic dye (methyl violet, MV). CrFeO₃‐NPs were hydrothermally synthesized and loaded on AC followed by characterization using X‐ray diffraction, field‐emission scanning electron microscopy and energy‐dispersive and Fourier transform infrared spectroscopies. The CrFeO₃‐NPs were tested for in vitro antibacterial activities against Gram‐positive (Staphylococcus aureus) and Gram‐negative (Pseudomonas aeruginosa) bacteria. Minimum inhibitory and minimum bactericidal concentrations of CrFeO₃‐NPs–AC were obtained to be 50 and 100 μg ml^?1, respectively, against S. aureus and 25 and 50 μg ml^?1 against P. aeruginosa. These results indicated the antibacterial properties of CrFeO₃‐NPs–AC. To investigate the adsorption process, several systematic experiments were designed by varying parameters such as adsorbent mass, pH, initial MV concentration and sonication time. The adsorption process was modelled and the optimal conditions were determined to be 0.013 g, 7.4, 15 mg l^?1 and 8 min for adsorbent mass, pH, MV concentration and sonication time, respectively. The real experimental data were found to be efficiently explained by response surface methodology and genetic algorithm model. Kinetic studies for MV adsorption showed rapid sorption dynamics described by a second‐order kinetic model, suggesting a chemisorption mechanism. Then, the experimental equilibrium data obtained at various concentrations of MV and adsorbent masses were fitted to conventional Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherm models. Dye adsorption equilibrium data were fitted well to the Langmuir isotherm. From the Langmuir model, the maximum monolayer capacity was calculated to be 65.67 mg g^?1 at optimum adsorbent mass.     

Generalized Low‐Temperature Fabrication of Scalable Multi‐Type Two‐Dimensional Nanosheets with a Green Soft Template

Two‐dimensional nanosheets with high specific surface areas and fascinating physical and chemical properties have attracted tremendous interests because of their promising potentials in both fundamental research and practical applications. However, the problem of developing a universal strategy with a facile and cost‐effective synthesis process for multi‐type ultrathin 2 D nanostructures remains unresolved. Herein, we report a generalized low‐temperature fabrication of scalable multi‐type 2 D nanosheets including metal hydroxides (such as Ni(OH)₂, Co(OH)₂, Cd(OH)₂, and Mg(OH)₂), metal oxides (such as ZnO and Mn₃O₄), and layered mixed transition‐metal hydroxides (Ni‐Co LDH, Ni‐Fe LDH, Co‐Fe LDH, and Ni‐Co‐Fe layered ternary hydroxides) through the rational employment of a green soft‐template. The synthesized crystalline inorganic nanosheets possess confined thickness, resulting in ultrahigh surface atom ratios and chemically reactive facets. Upon evaluation as electrode materials for pseudocapacitors, the Ni‐Co LDH nanosheets exhibit a high specific capacitance of 1087 F g^?1 at a current density of 1 A g^?1, and excellent stability, with 103 % retention after 500 cycles. This strategy is facile and scalable for the production of high‐quality ultrathin crystalline inorganic nanosheets, with the possibility of extension to the preparation of other complex nanosheets.     

Phosphate uptake behavior and mechanism analysis of facilely synthesized nanocrystalline Zn‐Fe layered double hydroxide with chloride intercalation

Zn‐Fe layered double hydroxide with chloride intercalation (ZFCL) was synthesized by a coprecipitation method at room temperature. ZFCL was characterized by N₂ adsorption‐desorption isotherms, X‐ray diffraction, scanning electron microscope, Zeta‐sizer analyzer, X‐ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. The results showed that ZFCL had large surface area and layered structure. The maximum adsorption capacity of ZFCL was 150.6 mg/g at 25°C. That was higher than most other adsorbent which were reported. The kinetic data were described better by the pseudo‐second‐order adsorption kinetic rate model. The adsorption isotherm on the adsorbent was described by Langmuir, Freundlich, and Sips models at pH 6 and followed the fitting order: Sips >Freundlich>Langmuir. Thermodynamic analyses indicated that the phosphate adsorption on ZFCL was endothermic and spontaneous in nature. The sequence of coexisting cations and anions competing with phosphate was Ca²⁺ > Mg²⁺ > Na⁺ and SO₄²⁻ > NO₃⁻ > Cl⁻. ZFCL can be regenerated by the sequential use of NaOH and ZnCl₂. The adsorption capacity remained high as 108.6 mg/g after regeneration of 3 times. The results of zeta potential, Fourier transform infrared spectroscopy, and X‐ray photoelectron spectroscopy analyses indicated that the phosphate adsorption mechanisms involved ion exchange, Zn₃(PO₄)₂ precipitation, and the formation of inner‐sphere complex via replacement of surface hydroxyl groups by phosphate.     

Synthesis,crystal structure and magnetic properties of a new tri‐nuclear iron (II,III) complex,a precursor for the preparation of superparamagnetic Fe3O4 nanoparticles applicable in the removal of Cd2+

This study reports the structural and spectroscopic characterization of a novel metal organic compound formulated as [Fe (bpy)₃] [Fe (dipic)₂]₂.7H₂O ( 1 ) (dipic = pyridine‐2,6‐dicarboxylate and bpy = 2,2^′‐bipyridine). 1 was investigated by elemental analysis, FT‐IR spectroscopy, powder X‐ray diffraction and single crystal X‐ray diffraction (SC‐XRD), which revealed a triclinic structure of expected composition. Thermal degradation of 1 was also investigated. Complex 1 was used as a precursor to prepare superparamagnetic nanoparticles of Fe₃O₄ by thermal analysis. The obtained Fe₃O₄ was characterized by Fourier transformed infrared spectroscopy (FT‐IR), powder X‐ray diffraction (XRD) and scanning electron microscopy (SEM). Fe₃O₄ nanoparticles were used as a nano‐adsorbent to remove Cd²⁺ from water at room temperature. The results showed that this nano‐adsorbent is effective in removing Cd²⁺ from contaminated water sources, and that the maximal effectivity of adsorption occurs at pH = 6. Magnetic measurements of complex 1 and Fe₃O₄ nanoparticles at room temperature revealed paramagnetic and superparamagnetic behavior, respectively.     

Magnetic hydroxyapatite nanoparticles: An efficient adsorbent for the separation and removal of nitrate and nitrite ions from environmental samples

A novel type of magnetic nanosorbent, hydroxyapatite‐coated Fe₂O₃ nanoparticles was synthesized and used for the adsorption and removal of nitrite and nitrate ions from environmental samples. The properties of synthesized magnetic nanoparticles were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and X‐ray powder diffraction. After the adsorption process, the separation of γ‐Fe₂O₃@hydroxyapatite nanoparticles from the aqueous solution was simply achieved by applying an external magnetic field. The effects of different variables on the adsorption efficiency were studied simultaneously using an experimental design. The variables of interest were amount of magnetic hydroxyapatite nanoparticles, sample volume, pH, stirring rate, adsorption time, and temperature. The experimental parameters were optimized using a Box–Behnken design and response surface methodology after a Plackett–Burman screening design. Under the optimum conditions, the adsorption efficiencies of magnetic hydroxyapatite nanoparticles adsorbents toward NO₃^? and NO₂^? ions (100 mg/L) were in the range of 93–101%. The results revealed that the magnetic hydroxyapatite nanoparticles adsorbent could be used as a simple, efficient, and cost‐effective material for the removal of nitrate and nitrite ions from environmental water and soil samples.     

5‐n‐Butylpyridine‐2‐carboxylate–copper(II) and –iron(III) complexes

In trans‐bis(5‐n‐butyl­pyridine‐2‐carboxyl­ato‐κ²N,O)­bis­(methanol‐κO)copper(II), [Cu(C₁₀H₁₂NO₂)₂(CH₄O)₂], the Cu atom lies on a centre of symmetry and has a distorted octahedral coordination. The Cu—O(methanol) bond length in the axial direction is 2.596 (3) Å, which is much longer than the Cu—­O(carboxylate) and Cu—N distances in the equatorial plane [1.952 (2) and 1.977 (2) Å, respectively]. In mer‐tris(5‐n‐bu­tyl­pyridine‐2‐carboxyl­ato‐κ²N,O)­iron(III), [Fe(C₁₀H₁₂NO₂)₃], the Fe atom also has a distorted octahedral geometry, with Fe—O and Fe—N bond‐length ranges of 1.949 (4)–1.970 (4) and 2.116 (5)–2.161 (5) Å, respectively. Both crystals are stabilized by stacking interactions of the 5‐n‐butyl­pyridine‐2‐carboxyl­ate ligand, although hydrogen bonds also contribute to the stabilization of the copper(II) complex.     

Development of air‐assisted dispersive micro‐solid‐phase extraction‐based supramolecular solvent‐mediated Fe3O4@Cu–Fe–LDH for the determination of tramadol in biological samples

A simple method, air‐assisted dispersive micro‐solid‐phase extraction‐based supramolecular solvent was developed for the preconcentration of tramadol in biological samples prior to gas chromatography–flame ionization detection. A new type of carrier liquid, supramolecular solvent based on a mixture of 1‐dodecanol and tetrahydrofuran was combined with layered double hydroxide coated on a magnetic nanoparticle (Fe₃O₄@SiO₂@Cu–Fe–LDH). The supramolecular solvent was injected into the solution containing Fe₃O₄@SiO₂@Cu–Fe–LDH in order to provide high stability and dispersion of the sorbent without any stabilizer agent. Air assisted was applied to enhance the dispersion of the sorbent and solvent. A number of analytical techniques such as Fourier transform‐infrared spectrometry, field emission scanning electron microscope, energy‐dispersive X‐ray spectroscopy and X‐ray diffraction measurements were applied to assess the surface chemical characteristics of Fe₃O₄@SiO₂@Cu–Fe–LDH nanoparticles. The effects of important parameters on the extraction recovery were also investigated. Under optimized conditions, the limits of detection and quantification were obtained in the range of 0.9–2.4 and 2.7–7.5 μg L^?1 with preconcentration factors in the range of 450–472 in biological samples. This method was used for the determination of tramadol in biological samples (plasma, urine and saliva samples) with good recoveries.     

Sorption Removal of Pb（Ⅱ） from Solution by Uncalcined and Calcined MgAl-Layered Double Hydroxides

Layered double hydroxide （LDH） with a Mg/Al molar ratio of 1 ： 1 was synthesized by using a co-precipitation method and its calcined product （CLDH） was obtained by calcination of the MgAl-LDH at 500 ℃. The sorption removal of Pb^2＋ from solution was investigated, finding that both LDH and CLDH show good sorption ability and they could be used as a new type of environmental sorbent for the removal of Pb^2＋ from water. The sorption kinetics and the sorption isotherms of Pb^2＋ on both LDH and CLDH can be described by the pseudo-second order kinetics and Freundlich isotherm, respectively, under the studied conditions. The sorption amounts of Pb^2＋ on LDH and CLDH are independent of pH in a pH range of about 3-10. The presence of NaNO3 may inhibit the sorption of Pb^2＋ on LDH while hardly affect that on CLDH. The sorption mechanism of Pb^2＋ on LDH and CLDH may be attributed to the surface precipitation and the surface complex adsorption. The surface complex adsorption may be further distinguished to the chemical binding adsorption forming the inner-sphere surface complexes and the electrostatic binding adsorption forming the outer-sphere surface complexes. The sorption mechanism of Pb^2＋ on LDH may be attributed to the surface precipitation and the electrostatic binding adsorption, while that on CLDH may be attributed to the surface precipitation and the chemical binding adsorption.     

Lanthanide(III) (Eu,Gd, Tb,Dy) Complexes Derived from 4‐(Pyridin‐2‐yl)methyleneamino‐1,2,4‐triazole: Crystal Structure,Magnetic Properties,and Photoluminescence

The reaction of lanthanide(III) nitrates with 4‐(pyridin‐2‐yl)methyleneamino‐1,2,4‐triazole (L) was studied. The compounds [Ln(NO₃)₃(H₂O)₃] ? 2 L, in which Ln=Eu ( 1 ), Gd ( 2 ), Tb ( 3 ), or Dy ( 4 ), obtained in a mixture of MeCN/EtOH have the same structure, as shown by XRD. In the crystals of these compounds, the mononuclear complex units [Ln(NO₃)₃(H₂O)₃] are linked to L molecules through intermolecular hydrogen‐bonding interactions to form a 2D polymeric supramolecular architecture. An investigation into the optical characteristics of the Eu³⁺‐, Tb³⁺‐, and Dy³⁺‐containing compounds ( 1 , 3 , and 4 ) showed that these complexes displayed metal‐centered luminescence. According to magnetic measurements, compound 4 exhibits single‐ion magnet behavior, with ΔE_eff/k_B=86 K in a field of 1500 Oe.     

Three‐Dimensional Ultralarge‐Pore Ia3d Mesoporous Silica with Various Pore Diameters and Their Application in Biomolecule Immobilization

Highly ordered mesoporous three‐dimensional Ia3d silica (KIT‐6) with different pore diameters has been synthesized by using pluronic P123 as surfactant template and n‐butanol as cosolvent at different synthesis temperatures in a highly acidic medium. The materials were characterized by XRD and N₂ adsorption. The synthesis temperature plays a significant role in controlling the pore diameter, surface area, and pore volume of the materials. The material prepared at 150 °C, KIT‐6‐150, has a large pore diameter (11.3 nm) and a high specific pore volume (1.53 cm³ g^?1). We also demonstrate immobilization of lysozyme, which is a stable and hard protein, on KIT‐6 materials with different pore diameters. The amount of lysozyme adsorbed on large‐pore KIT‐6 is extremely large (57.2 μmol g^?1) and is much higher than that observed for mesoporous silicas MCM‐41, SBA‐15, and KIT‐5, mesoporous carbons, and carbon nanocages. The effect of various parameters such as buffer concentration, adsorption temperature, concentration of the lysozyme, and the textural parameter of the adsorbent on the lysozyme adsorption capacity of KIT‐6 was studied. The amount adsorbed mainly depends on solution pH, ionic strength, adsorption temperature, and pore volume and pore diameter of the adsorbent. The mechanism of adsorption on KIT‐6 under different adsorption conditions is discussed. In addition, the structural stability of lysozyme molecules and the KIT‐6 adsorbent before and after adsorption were investigated by XRD, nitrogen adsorption, and FTIR spectroscopy.