Adhesion hysteresis in dynamic atomic force microscopy

The effects of adhesion hysteresis in the dynamic‐dissipation curves measured in amplitude‐modulation atomic force microscopy are discussed. Hysteresis in the interaction forces is shown to modify the dynamics of the cantilever leading to different power dissipation curves in the repulsive and attractive regimes. Experimental results together with numerical simulations show that power dissipation, as measured in force microscopy, is not always proportional to the energy dissipated in the tip–sample interaction process. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Self-organized semiconductor surfaces as templates for nanostructured magnetic thin films

Spontaneous pattern formation during epitaxial growth or ion erosion of semiconductor wafers offers an elegant route towards large-area nanostructured surfaces. In homoepitaxy, kinetics may result in rather uniform three-dimensional islands. In the case of semiconductor heteroepitaxy, strain relief leads to the formation of nanofaceted three-dimensional crystallites, which may self-organize into quasiperiodic arrays. By tuning substrate miscut and film thickness, or growing superlattices, a variety of patterns with different symmetries can be obtained, as will be summarized for the model system of SiGe on Si(001). Since these self-organized nanostructure arrays cover the entire wafer on which they are grown, they can serve as large-area nanopatterned substrates for subsequent deposition of magnetic thin films. It will be demonstrated that such templates allow the study of correlations between magnetic and chemical interfacial roughness, as well as the influence of pattern symmetry on the magnetic anisotropy of thin Co films. Furthermore, shadow deposition of magnetic material onto specially faceted nanostructure arrays allows the fabrication of nanomagnet arrays and the study of their magnetic properties. Received: 31 July 2002 / Accepted: 2 October 2002 / Published online: 5 February 2003 RID="*" ID="*"Corresponding author. Fax: +43-3842/402-760, E-mail: teichert@unileoben.ac.at     

Microexplosions in tellurite glasses

Femtosecond laser pulses were used to produce localized damage in the bulk and near the surface of baseline, Al₂O₃-doped and La₂O₃-doped sodium tellurite glasses. Single or multiple laser pulses were non-linearly absorbed in the focal volume by the glass, leading to permanent changes in the material in the focal volume. These changes were caused by an explosive expansion of the ionized material in the focal volume into the surrounding material, i.e. a microexplosion. The writing of simple structures (periodic array of voxels, as well as lines) was demonstrated. The regions of microexplosion and writing were subsequently characterized using scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS) and atomic force microscopy (AFM). Fingerprints of microexplosions (concentric lines within the region and a concentric ring outside the region), due to the shock wave generated during microexplosions, were evident. In the case of the baseline glass, no chemistry change was observed within the region of the microexplosion. However, Al₂O₃-doped and La₂O₃-doped glasses showed depletion of the dopant from the edge to the center of the region of the microexplosions, indicating a chemistry gradient within the regions. Interrogation of the bulk- and laser-treated regions using micro-Raman spectroscopy revealed no structural change due to the microexplosions and writing within these glasses. Received: 27 December 2001 / Accepted: 9 July 2002 / Published online: 25 October 2002 RID="*" ID="*"Corresponding author. +1-509/376-3108, E-mail: sk.sundaram@pnl.gov     

Effects of confinement on static and dynamical properties of water

Molecular-dynamics results on water confined in a silica pore are reviewed and discussed in connection with experiments performed on water in Vycor and with studies of water in contact with proteins. The properties of confined water are studied as a function of both temperature and hydration level. The interaction of water in the film close to the substrate with the silica atoms induces a strong distortion of the hydrogen bond network. At high hydration levels a double dynamical regime is observed. At low hydration an anomalous diffusion is found upon supercooling with a transition from a Brownian to a non-Brownian regime on approaching the substrate in agreement with results found in studies of water in contact with globular proteins.Received: 1 January 2003, Published online: 14 October 2003PACS: 61.20.-p Structure of liquids - 61.20.Ja Computer simulation of liquid structure     

Nanofoaming in the surface of biopolymers by femtosecond pulsed laser irradiation

In this work, the nanostructuring induced in femtosecond (fs) laser irradiation of biopolymers is examined in self-standing films of collagen and gelatine. Irradiation by single 90 fs pulses at 800, 400 and 266 nm is shown to result in the formation of a modified layer with submicrometric size structures. The size and uniformity of the observed features are strongly dependent on irradiation wavelength and on the characteristics of the biopolymer (water content and mechanical strength). Examination of the films by laser induced fluorescence serves to assess the chemical modifications induced by laser irradiation, revealing changes in the emission bands assigned to the aromatic amino acid tyrosine and its degradation products. The results are discussed in the framework of a mechanism involving the generation of large free-electron densities, through multiphoton and avalanche ionization, which determine the temperature and stress distribution in the irradiated volume.     

Thickness dependence on thermal stability of sputtered Ag nanolayer on Ti/Si(1 0 0)

Thermal stability of Ag layer on Ti coated Si substrate for different thicknesses of the Ag layer have been studied. To do this, after sputter-deposition of a 10 nm Ti buffer layer on the Si(1 0 0) substrate, an Ag layer with different thicknesses (150-5 nm) was sputtered on the buffer layer. Post annealing process of the samples was performed in an N₂ ambient at a flow rate of 200 ml/min in a temperature range from 500 to 700 °C for 30 min. The electrical property of the heat-treated multilayer with the different thicknesses of Ag layer was examined by four-point-probe sheet resistance measurement at the room temperature. Phase formation and crystallographic orientation of the silver layers were studied by θ-2θ X-ray diffraction analysis. The surface topography and morphology of the heat-treated films were determined by atomic force microscopy, and also, scanning electron microscopy. Four-point- probe electrical measurement showed no considerable variation of sheet resistance by reducing the thickness of the annealed Ag films down to 25 nm. Surface roughness of the Ag films with (1 1 1) preferred crystallographic orientation was much smaller than the film thickness, which is a necessary condition for nanometric contact layers. Therefore, we have shown that the Ag layers with suitable nano-thicknesses sputtered on 10 nm Ti buffer layer were thermally stable up to 700 °C.     

Laser-induced forward transfer technique for maskless patterning of amorphous V2O5 thin film

A laser-induced forward transfer technique has been applied for the maskless patterning of amorphous V₂O₅ thin films. A sheet beam of a frequency doubled (SHG) Q-switched Nd:YAG laser was irradiated on a transparent glass substrate (donor), the rear surface of which was pre-coated with a vacuum-deposited V₂O₅ 180 nm thick film was either in direct contact with a second glass substrate (receiver) or a 0.14 mm air-gap was maintained between the donor film and the receiving substrate. Clear, regular stripe pattern of the laser-induced transferred film was obtained on the receiver. The pattern was characterized using X-ray diffraction (XRD), optical absorption spectroscopy, scanning electron microscopy (SEM), energy dispersive analysis of X-ray (EDAX), atomic force microscopy (AFM), etc.     

Ceria concentration effect on chemical mechanical polishing of optical glass

It was found material removal rate (MRR) sharply increased from 250 to 675 nm/min as the concentration decreased from 1 to 0.25 wt% in optical glass chemical mechanical polishing (CMP) using ceria slurries. Scanning electron microscopy was employed to characterize the ceria abrasive used in the slurry. Atomic force microscopy results showed good surface had been got after CMP. Schematic diagrams of the CMP process were shown. Furthermore, the absorption spectra indicated a sudden change from Ce⁴⁺ to Ce³⁺ of the ceria surface when the concentration decreased, which revealed a quantum origin of the phenomenon.     

Atomic layer deposition of PbZrO3 thin films

In this paper, we report on the preparation of lead zirconate films for the first time using atomic layer deposition in an attempt to investigate some of the film properties and also to evaluate possible use of the precursor combination to prepare more complex lead titanate zirconate. In the depositions tetraphenyl lead (Ph₄Pb) was used as the lead and zirconium 2,2,6,6-tetramethyl-3,5-heptadionato (Zr(thd)₄) as the zirconium precursor, while ozone was used as the oxygen source. Film growth, stoichiometry and quality were studied using different pulsing ratios at deposition temperatures of 275 and 300 °C. According to X-ray diffraction, the crystalline perovskite phase was observed when films deposited on SrTiO₃(1 0 0) were annealed at 600 °C. Surface roughness was reduced for lead deficient films as well as in annealed samples.     

Adsorption and manipulation of carbon onions on highly oriented pyrolytic graphite studied with atomic force microscopy

Carbon onions produced by DC arc discharge method were deposited on highly oriented pyrolytic graphite (HOPG) surface and their adsorption and manipulation was studied using an atomic force microscopy (AFM). Well-dispersed adsorption of carbon onions on HOPG surface was obtained and aggregations of onions were not observed. The van der Waals interaction between the onion and HOPG surface and that between two onions, were calculated and discussed using Hamaker's theory. The manipulation of adsorbed onions on HOPG surface was realized using the AFM in both the raster mode and the vector mode. The controllability and precision of two manipulation modes were compared and the vector mode manipulation was found superior, and is a useful technique for the construction of nano-scale devices based on carbon onions.