ZrO2及其含量对Pd/ZrO2-Al2O3催化剂加氢脱硫性能的影响

采用浸渍法制备了一系列Pd/ZrO2-Al2O3催化剂,并考察了ZrO2-Al2O3复合载体及其ZrO2含量对Pd基催化剂噻吩加氢脱硫(HDS)性能的影响,运用XRD和NH3-TPD等手段对催化剂进行了表征。结果表明,ZrO2-Al2O3复合载体及其ZrO2含量对Pd基催化剂的HDS性能有较大的影响,其中ZrO2含量为12wt%时Pd/ZrO2-Al2O3催化剂的活性最好。ZrO2-Al2O3复合载体及其ZrO2含量对Pd基催化活性的影响是通过增加Pd的分散度、H吸附量和催化剂的酸量、以及降低活性组分与载体的相互作用来实现。     

Unsupported Molybdenum and Cobalt-Molybdenum Nitrides for Thiophene Hydrodesulfurization

The catalytic activity and the structure of unsupported Mo and CoMo nitrided catalysts were investigated. It was found that the structure and catalytic activity of the nitrided catalysts are influenced by the conditions of nitridation. Molybdenum oxynitrides are more active in hydrodesulfurization (HDS) of thiophene than MoS₂. The addition of cobalt to nitrided Mo improves its HDS activity, however, sulfided CoMo catalyst is still more active than the nitrided one. Synergy between Co and Mo for the nitrided unsupported CoMo catalyst exists at lower degree than for the sulfided form of CoMo.     

Highly active CoMo HDS catalyst for the production of clean diesel fuels

HY–Al₂O₃-supported CoMo catalysts with a chelating agent and phosphorus for the hydrodesulfurization (HDS) of diesel fractions were prepared. The activity measurements with the prepared catalysts were carried out with straight-run light gas oil feedstocks in a pilot plant under industrial hydrotreating conditions. As a result, Cosmo Oil Co., Ltd. developed a new CoMoP/HY–Al₂O₃ catalyst, C-606A, which had three times higher HDS activity than the conventional CoMoP/Al₂O₃ catalyst. Commercial operations to produce ultra-low sulfur diesel (ULSD) with C-606A have successfully demonstrated its high performance and high stability. This catalyst has an extremely high activity, which enables to achieve <10-ppm sulfur in products in diesel hydrotreater designed to produce 500-ppm sulfur diesel fuels. Mo K-edge EXAFS, TEM and FT-IR of adsorbed NO were performed to investigate the nature of the active sites on the developed catalysts. The results showed that the new catalyst has multiple layers of MoS₂ slabs and the edges of MoS₂ are mainly occupied by Co–Mo–S phases. XPS and FT-IR were used to investigate the sulfiding behavior of Co and Mo in the formation process of the active sites during sulfidation. The results showed that addition of carboxylic acid to the impregnation solution postponed the sulfidation of Co at low temperatures, thereby increasing formation of the Co–Mo–S phase.     

利用CO和NO吸附的红外光谱表征还原态的Ru-Co-Mo/Al_2O_3催化剂

用CO和NO吸附的红外光谱表征了还原态的Ru-Co-Mo/Al_2O_3催化剂。结果表明,和Ru/Al_2O_3相比,CO吸附于Ru-Co-Mo/Al_2O_3的Ru中心上的红外谱带向高波数移动;和Co-Mo/Al_2O_3相比,CO和NO吸附在Ru-Co-Mo/Al_2O_3的Co、Mo中心上的特征谱带向低波数移动;通过TPD-IR还可看到,CO和NO在Ru-Co-Mo/Al_2O_3的吸附量及脱附温度大大地提高了。这些结果说明在Ru-Co-Mo/Al_2O_3的Ru中心上的部分电子转移到Co、Mo中心或其周围,或者Ru中心的存在促进了Co、Mo中心的还原。     

Effect of Reduction Temperature on Hydrofining Performance of Supported Molybdenum Phosphide Catalyst

A series of supported molybdenum phosphide catalysts were prepared by impregnation method. XRD, TG-DTG, XPS and BET were used to study the phase, compositions and surface areas of the prepared catalysts. A model reactant containing thiophene, pyridine and cyclohexene was used for the measurements of catalytic activities. The effect of reduction temperature on catalytic activities was investigated. The analysis results by XRD and BET are very different when the reduction temperature is changed from 400 to 900 ℃. MoP/γ-Al2O3 catalysts and CoMoP/γ-Al2O3 catalysts prepared at the reduction temperature of 500 ℃ are the most active ones.     

WP/γ-Al2O3催化剂负载方式对噻吩加氢脱硫性能的影响

以γ-Al2O3为载体，分别采用机械混合法、共浸渍法、分步浸渍法和程序升温、高纯氢气还原无定型磷钨酸盐的方法，制备了活性组分为磷化钨，负载量为20%的WP/γ-Al2O3催化剂。考察了不同方法制备的催化剂对噻吩加氢脱硫（HDS）反应的催化活性。结果表明：不同负载方式对催化剂结构有一定影响，对噻吩加氢脱硫性能的影响在低温时较明显。采用机械混合方式，先混合后还原方法制备的催化剂其HDS活性比先还原后混合方法制备的催化剂高；采用共浸渍和分步浸渍方式，通过焙烧所形成的催化剂其HDS活性分别比不经焙烧所形成的催化剂高或接近；浸渍焙烧所形成的催化剂其HDS活性远远高于机械混合法制备的催化剂。     

碱熔-电感耦合等离子体原子发射光谱法测定废弃加氢脱硫(HDS)催化剂中的钒

本文建立了碱熔-电感耦合等离子体原子发射光谱法（ICP-OES）测定废弃加氢脱硫（HDS）催化剂中钒的方法,来协助加氢脱硫（HDS）催化剂回收实验的进行。试验采用过氧化钠熔解试样,用盐酸浸取后定容,稀释试液后控制盐酸酸度为10%,并选择钒292.401 nm为分析谱线。试验结果表明,为了消除基体效应的影响,需要使试液中钠元素、盐酸的含量和标准溶液中的钠元素、盐酸的含量相同。钒质量浓度在1.00-20.00 μg/mL时与发射强度呈线性关系,相关系数均为1。按照上述方法测定了5个废弃加氢脱硫（HDS）催化剂样品中的钒,并采用格拉布斯检验方法检验11次,测定结果无异常值,加标回收率为99%-101%。该方法有效解决了废弃加氢脱硫（HDS）催化剂中钒测定的难题,可用于测定钒质量分数为0.50%-10.00%的HDS催化剂,同时对其他产品中钒的测定提供一种新思路。     

NiMo/Al_2O_3 catalyst containing nano-sized zeolite Y for deep hydrodesulfurization and hydrodenitrogenation of diesel

Two mixed-matrix NiMo/Al2O3 catalysts containing nano-and micro-sized zeolite Y have been prepared to explore the size effect of zeolite Y particle on the hydrodesulfurization(HDS)and hydrodenitrogenation(HDN)activities of fluid catalytic cracking(FCC)diesel.They were characterized by SEM,BET,XRD,H2-TPR,NH3-TPD and HRTEM.The results show that the catalyst containing nano-sized zeolite Y possesses larger average pore diameter,higher pore volume,weaker and lesser acid sites,more easily reducible metal phases,shorter MoS2 slabs and more slab layers than the catalyst containing micro-sized zeolite Y.The catalysts were also evaluated with a high-pressure fixed-bed reactor using real FCC diesel as feed.The results display that the catalyst containing nano-sized zeolite Y bears higher HDS and HDN activities and exhibits higher relative rate constant for the removal of total sulfur or nitrogen than the one containing micro-sized zeolite.     

磷对预硫化型NiMo/Al2O3催化剂加氢脱硫脱氮性能的影响

利用等体积浸渍法制备了不同磷含量的预硫化型NiMo/Al2O3催化剂,并利用XRD、BET、TPR和HRTEM等分析方法对其进行了表征,研究了磷对其加氢脱硫脱氮性能的影响.结果表明,由于预硫化型NiMo加氢催化剂上活性组分和载体的相互作用较弱,MoS2或Ni-Mo-S相主要以TypeⅡ形式存在,磷通过增加MoS2的堆积...     

多酸基深度加氢脱硫催化剂的原位表征和反应性能

采用浸渍法合成了镍盐复合的磷钨酸(HPW)/纳米晶HZSM-5固体酸催化剂,其在催化裂化(FCC)汽油加氢改质反应中显示出了良好地深度加氢脱硫活性。 原位电子自旋共振和原位吡啶吸附红外光谱表征手段的研究结果表明,纳米晶HZSM-5沸石上Ni(Ⅱ)结合3电子还原态的HPW(Ⅲ)是FCC汽油深度加氢脱硫反应的活性中心。 探讨了多酸基催化剂在FCC汽油深度加氢脱硫反应中活性改善的原因。