工艺参数对铀表面铝镀层热应力分布影响

为了防止铀的腐蚀，采用在铀表面磁控溅射镀铝，但使用中发现铝镀层内产生了较大的应力，影响镀层结合强度及使用性能。通常认为，薄膜内的应力有热应力和生长应力两种。文中通过改变沉积温度、镀层厚度以及镀层力学性能分数，研究它们对镀层热应力分布的影响，从而为改善铀表面铝镀层内热应力分布提供理论依据。     

Formation Mechanism and Orderly Structures of an Iron Film System Deposited on Silicone Oil Surfaces

A new iron film system,deposited on silicone oil surfaces by vapour phase deposition method,has been fabricated and its formation mechanism as well as orderly structures has been studied,It is found that the formation mechanism of the films obeys a two-stage growth model,which is similar to that to the other metallic films on liquid substrates,Large and orderly structures are observed in the continuous iron films.The experiments show that the orderly spatial structures result from the local material gathering in these nearly free sustained films.     

SURFACE METALLIZATION OF CENOSPHERES AND PRECIPITATORS BY ELECTROLESS PLATING

This paper reports the use of a colloidal Pd^0 catalysis system to metallize the surface of precipitators separated from coal fly-ash, and metals such as Cu, Ni etc. are deposited on the precipitators surface. Alternatively, according to the characteristic surface of cenospheres, an Ag coating catalysis system is adopted to first deposit Ag on the cenospheres surface, followed, if necessary, by the deposition of other metals such as Cu, Ni, etc. on the Ag coating to produce monolayer and multilayer metal-coated cenospheres. The surface characteristics and the morphologies of the metal coatings are examined in detail with scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) techniques. It can be shown that the quality of metal coatings derived from the Aa coatina catalysis system, is better than that of the colloidal Pd^0 catalysis system.     

CTAB对四-(4-N-甲基吡啶)卟啉SERS谱的影响

研究了阳离子表面活性剂十六烷基三甲基溴化铵 (CTAB)对四 ( 4 N 甲基吡啶 )卟啉 (H2 TMPyP)及其银配合物 (AgTMPyP)在Ag胶中的表面增强拉曼散射 (SERS)谱的影响 .SERS光谱表明 ,吸附于Ag胶粒的H2 TMPyP与衬底银原子结合形成AgTMPyP ,加入CTAB后 ,部分AgTMPyP表面络合物还原为H2 TMPyP .相似的去金属化反应也出现在AgTMPyP/Ag胶 /CTAB体系中 .CTAB的加入使SERS谱带强度明显增加 .AgTMPyP的去金属化被认为是由于CTAB的存在使Ag胶颗粒表面附近微环境发生改变     

准一维电子通道中声电电流的理论计算

表面声波在GaAs/Al _x Ga_1-x As异质结表面上沿由分裂门产生的准一维电子通道方向传 播时，在通道中诱导产生声电电流.采用WKB近似，计算了只有一个电子被量子阱俘获时的声电电流；并在此基础上，详细讨论了表面声波的频率和功率，以及门电压和源漏偏压对声电电流的影响. 关键词： 表面声波 准一维电子通道 量子阱 声电电流     

真空中氧化铝陶瓷沿面耐压试验

真空中陶瓷绝缘子的耐压能力严重受到其表面性能的制约，在远低于同尺寸的真空间隙的耐压强度和绝缘子体耐压水平的情况下，绝缘子就出现了击穿现象，即沿面闪络击穿。利用真空绝缘实验装置选用95氧化铝陶瓷和掺锰铬氧化铝陶瓷样品进行表面耐压试验，对不同组分的陶瓷样品的耐压性能比较，并探讨表面处理及测试法对绝缘子表面绝缘性能的影响。     

薄壁绕丝筒体应力与变形的近似计算

将等张力缠绕筒体钢丝层中沿厚度方向近似呈阶梯状分布的预应力简化为均匀分布,其大小由钢丝层预应力降低系数η确定(η随钢丝层厚度的增大而减小),由此可获得薄壁绕丝筒体应力与变形的近似计算式.     

HL—1装置SiC涂层辐照实验的表面分析

本文应用表面分析技术研究HL-1装置中SiC涂层的等离子体辐照性能。结果表明,SiC材料应用于孔栏和壁涂层有利于减少杂质和提高等离子体品质。