铜、锌在5-Br-PADAP和表面活性剂体系中的分光光度法同时测定

5一Br—PADAP在阳离子表面活性剂溴代十六烷基三甲胺存在下同时测定Cu^2 和Zn^2 ，找出最佳实验条件，对水和血清测定结果令人满意．     

C60量子点与磁性电极的耦合

在磁电子学领域，自旋极化输运与分子器件的结合是一个热门研究方向．最近，来自美国康奈尔大学的Pasupathy等，采用纳米加工技术，将单个C60分子吸附在一对Ni电极之间，构成了“铁磁电极-C60量子点”器件．量子点的Kondo效应和铁磁性交换耦合，原本是相互排斥的，在Pasupathy的实验中，两者被首次结合在一个器件中并加以观察．研究结果表明，如果器件的质量能够保证两种效应之间的竞争得到有效控制，     

形态对钯-氢体系热力学性质的影响

在典型的Sieverts装置上采用等温等容(即PVT)法测定海绵钯粉末在T=278～323K吸放氕、氘的P-C-T曲线。结合文献给出的其他形态的Pd吸放氢结果进行系统比较分析，探讨了形态对钯-氢体系热力学性质的宏观影响和微观本质。     

水动力学问题的弱可压缩模型求解方法研究

从弱可压缩水动力学方程出发，采用坐标变换的方法处理自由表面，建立了能够模拟有自由表面流动问题的定常、非定常的三维水动力学模型和对流扩散模型，模型采用浮湍流模型进行封闭，并对模型求解的数值方法进行了研究。     

辽河冷家油田特稠油降粘剂LJVR-1及其性能评价

采用荧光法测定了辽河冷家油田冷47-556井特稠油乳化HLB值,然后以混合型表面活性剂、非离子型表面活性剂为主剂,快速渗透剂为辅剂按一定比例制备了水基降粘剂LJVR-1.实验结果表明,该降粘剂具有良好的乳化降粘性能,开采后易于破乳脱水,是一种较为理想的特稠油降粘剂.     

工艺参数对铀表面铝镀层热应力分布影响

为了防止铀的腐蚀，采用在铀表面磁控溅射镀铝，但使用中发现铝镀层内产生了较大的应力，影响镀层结合强度及使用性能。通常认为，薄膜内的应力有热应力和生长应力两种。文中通过改变沉积温度、镀层厚度以及镀层力学性能分数，研究它们对镀层热应力分布的影响，从而为改善铀表面铝镀层内热应力分布提供理论依据。     

聚氨酯泡沫塑料磁控溅射镀膜工艺

机械加工后的聚氨酯泡沫塑料，由于破坏了模塑成型的外表面膜层，材料本身多孔隙暴露在空气中，极易受潮、变形，孔隙吸附的气体对真空度有严格要求的镀膜造成极大困难，材质疏松不利于膜层结合，其低熔点的性质也使镀膜工艺的选择受到限制。采用合适的前处理技术和磁控溅射镀膜参数，可以在保证制造精度的前提下镀得一定厚度的不锈钢膜层，为该类产品提供有效的防护。     

Formation Mechanism and Orderly Structures of an Iron Film System Deposited on Silicone Oil Surfaces

A new iron film system,deposited on silicone oil surfaces by vapour phase deposition method,has been fabricated and its formation mechanism as well as orderly structures has been studied,It is found that the formation mechanism of the films obeys a two-stage growth model,which is similar to that to the other metallic films on liquid substrates,Large and orderly structures are observed in the continuous iron films.The experiments show that the orderly spatial structures result from the local material gathering in these nearly free sustained films.     

SURFACE METALLIZATION OF CENOSPHERES AND PRECIPITATORS BY ELECTROLESS PLATING

This paper reports the use of a colloidal Pd^0 catalysis system to metallize the surface of precipitators separated from coal fly-ash, and metals such as Cu, Ni etc. are deposited on the precipitators surface. Alternatively, according to the characteristic surface of cenospheres, an Ag coating catalysis system is adopted to first deposit Ag on the cenospheres surface, followed, if necessary, by the deposition of other metals such as Cu, Ni, etc. on the Ag coating to produce monolayer and multilayer metal-coated cenospheres. The surface characteristics and the morphologies of the metal coatings are examined in detail with scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) techniques. It can be shown that the quality of metal coatings derived from the Aa coatina catalysis system, is better than that of the colloidal Pd^0 catalysis system.