Deposition of Diamond-Like carbon Films by High-Intensity Pulsed Ion Beam Ablation at Various Substrate Temperatures

Diamond-like carbon (DLC) films have been deposited on to Si substrates at substrate temperatures from 255℃ to 400O℃ by a high-intensity pulsed-ion-beam (HIPIB) ablation deposition technique. The formation of DLC is confirmed by Raman spectroscopy. According to an x-ray photoelectron spectroscopy analysis, the concentration of sp^3 carbon in the films is about 40% when the substrate temperature is below 300℃ C. With increasing substratetemperature from 25℃ to 400℃, the concentration of sp^3 carbon decreases from 43% to 8%. In other words,sp3 carbon is graphitized into sp^2 carbon when the substrate temperature is above 300℃. The results of xray diffraction and atomic force microscopy show that, with increasing the substrate temperature, the surface roughness and the friction coefficient increase, and the microhardness and the residual stress of the films decrease.     

Pt-SDB疏水催化剂的研制

基于液相水-氢同位素催化交换的疏水催化剂研究已有近30年历史。从所报道的资料来看，目前用于重水提氚工艺中相转移的疏水催化剂主要集中在Pt-C-PTFE和Pt-SDB两类材料上。前者疏水性好，耐辐照稳定性好，后者催化活性好，但催化剂耐辐照稳定性稍差。拟在特制的SDB疏水材料上制备出催化活性好，性能稳定，满足使用要求的Pt-SDB疏水催化剂。     

Optical Properties of ZnFe2O4—SiO2 Granular Films Prepared by Radio—Frequency Magnetron Sputtering

We report on the optical properties of ZnFe2O4-SiO2 granular films prepared on quartz substrates by the radio-frequency magnetron sputtering method.Post-annealing was performed at different temperatures under flow oxygen atmosphere.The morphology and Structures of ZnFe2O4 nanoparticles were characterized by x-ray different line types in the optical absorption curves of ZnFe2O4-SiO2 granular films.The critical transition of line types occurs when ZnFe2O4 changes from amorphous to crystalline,and the transition temperature increases with the increasing content of ZnFe2O4.There is an obvious blueshift of the optical absorption edge of the granular films with the decreasing annealing temperature.     

Fluorescence Microscopy of Nanoscale Silver Oxide Thin Films

The experimental conditions for photoactivated intermittent fluorescence from nanoscale silver oxide were studied with fluorescence microscopy.Strong fluorescence was observed from the Ag2O particles with size of 10-20nm excited with both blue and green light .We observed the saturation of Photoexcitation with blue light and explained the experimental results using the model of agglomeration of silver atoms to form small clusters and the fluorescence of Ag2 and Ag3 clusters.     

纳米Ti02／碳化树脂复合催化剂的合成及其光催化性能研究

利用一种简单、快速的方法合成了纳米TiO2／碳化树脂(B)复合催化剂。对其组成、结构、尺寸及其光催化性能进行了表征。结果表明，该复合材料为由碳、氢、氧和钛等4种元素组成的纳米材料，尺寸约30nm，其中Ti和O的堆积结构为锐钛矿型；在该复合材料中，B为具有活性基团和不同长度碳—碳共轭链的大分子，且与TiO2之间存在着某种化学作用,复合材料所具有的特殊电子结构不仅使其能吸收紫外—可见区的全程光波。而且对光生电荷具有很高的分离能力，从而表现出较高的光催化活性。     

基片温度对坡莫合金薄膜结构和磁电阻的影响

用磁控溅射方法制备了系列坡莫合金Ni80Fe20薄膜。利用X射线衍射、扫描电子显微镜和原子力显徽镜分析了薄膜的结构、晶粒取向、薄膜厚度、截面结构和表面形态。用4点探测技术测量了薄膜的电阻和磁电阻。结果表明：随衬底温度的升高，晶粒明显长大。膜内的缺陷和应力显著减小，而且增强了薄膜晶粒的[111]择优取向。结果表明，薄膜电阻率显著减小，而磁电阻显著增大。     

离子注入合成β-FeSi2薄膜的显微结构

采用MEVVA源(Metal Vapor Vacuum Arc Ion Source)离子注入合成β-FeSi2薄膜,用常规透射电镜和高分辨电镜研究了不同制备参数下β-FeSi2薄膜的显微结构变化. 研究结果表明:调整注入能量和剂量,可以得到厚度不同的β-FeSi2表面层和埋入层. 制备过程中生成的α,β,γ和CsCl型FeSi2相的相变顺序为γ-FeSi2→β-FeSi2→α-FeSi2,CsCl-FeSi2→β-FeSi2→α-FeSi2或β-FeSi2→α-FeSi2. 当注入参数增加到60kV,4×1017ions/cm2,就会导致非晶的形成,非晶在退火后会晶化为β-FeSi2相,相变顺序就变为非晶→β-FeSi2→α-FeSi2. 随退火温度逐渐升高硅化物颗粒逐渐长大,并向基体内部生长,在一定的退火温度下硅化物层会收缩断裂为一个个小岛状,使得硅化物/硅界面平整度下降. 另外,对于β-FeSi2/Si界面取向关系的研究表明,在Si基体上难以形成高质量β-FeSi2薄膜的原因在于多种非共格取向关系的并存、孪晶的形成以及由此导致的界面缺陷的形成.     

SrO－La_2O_3／CaO催化剂表面的碱性和催化行为Ⅰ．CO_2－TPD及进料中CO_2对催化行为的影响

添加ＳｒＯ使Ｌａ２Ｏ３／ＣａＯ催化剂的碱性增强及甲烷氧化偶联反应的Ｃ２产率提高，但反应温度随ＳｒＯ含量增加而升高．反应活性高的ＳｒＯ－Ｌａ２Ｏ３／ＣａＯ催化剂，容易被ＣＯ２中毒．催化剂失活的主要原因是表面活性位被碳酸盐覆盖．催化剂失活之前，反应气中添加ＣＯ２可抑制产物中ＣＯ２的生成，提高Ｃ２产率     

同步辐射光电子能谱表征MgO在GaAs（100）上淀积过程中的氧物种

用同步辐射光电子能谱表征了不同氧分压下通过热蒸发镁在ＧａＡｓ（１００）面制备氧经物超薄膜过程中的氧物种，结果表明表面氧物种的形式与镁氧配比有关，较高的氧分压下于形成活泼的分子离子等氧中间体，因此通过控制镁氧比可以制备高效的薄膜模型催化剂或适合于功能材料集成的规则氧化物过渡层，氧物种的形式可以通过能谱中不同的原子或分子轨道电子跃迁来有效地区分。     

金属羰基化合物（CpFe（CO）2）2与金属氧化物表面作用的傅里叶变…

用漫反射红外光谱和光声红外光谱研究了金属羰基化合物（ＣｐＦｅ（ＣＯ）２）２Ｃｐ＝η＾５－Ｃ５Ｈ５与酸性，中性和碱性Ａｌ２Ｏ３及ＴｉＯ２的相互作用，结果表明，在Ａｌ２Ｏ３表面生成的洗生物种类及浓度与Ａｌ２Ｏ３的酸碱度明显相关，在酸性Ａｌ２Ｏ３表面，主要存在衍生物（ＣｐＦｅ（ＣＯ）２Ｆｅ－Ｈ－Ｆｅ（ＣＯ２Ｃｐ）＾＋及少量的ＣｐＦｅ（ＣＯ）２（－Ｏ－）；在中性Ａｌ２Ｏ３表面存在的ＣｐＦｅ（ＣＯ）２（－Ｏ