Crystallization and Preliminary Crystallographic Studies of Cucurmosin 2,a Ribosome-inactivating Protein from the Sarcocarp of Cucurbita moschata

Cucurmosin 2, a type 1 ribosome-inactivating protein （RIP） isolated from sarcocarp of Cucurbita moschata, has been crystallized by the vapor-diffusion method using PEG6000 as the precipitant. The crystals belong to the orthorhombic space group P212121, with unit cell parameters a = 55.853, b = 65.507, c = 91.754 А, and have one molecule per asymmetric unit. X-ray data have been collected to 1.8А, using a synchrotron source.     

傅立叶变换红外光谱技术在超临界CO2作用聚合物体系中的应用

超临界CO₂（scCO₂）作为一种物理化学性质优良、具有高扩散速率及优良溶解性能的溶剂,在科学研究及工业生产中广受青睐。将scCO₂应用于聚合物体系中,CO₂ 与聚合物间特殊的相互作用有利于CO₂分子在聚合物中的吸附与扩散。同时通过CO₂的吸附及其对聚合物的溶胀和塑化作用,聚合物所处微观化学环境以及整体结构性质会发生一定的变化。由于傅立叶变换红外光谱（FTIR）技术能够有效地考察化学环境变化对分子结构造成的影响,这一表征技术在超临界CO₂作用体系中广为应用。本文主要选取了近年来利用FTIR技术考察scCO₂作用于聚合物体系的一些实例,从CO₂-聚合物相互作用机理,scCO₂对聚合物或生物大分子的加工过程的影响两方面,阐述了利用红外光谱技术在scCO₂作用体系中的应用以及前景。     

含氟聚合物共混对聚醚醚酮结晶行为的影响

通过示差扫描量热仪(DSC)对含氟聚合物与聚醚醚酮(PEEK)共混物的非等温结晶熔融行为和等温结晶熔融行为进行了研究.研究表明:不同的含氟聚合物以及具有不同端基的同种含氟聚合物对PEEK的结晶行为有不同的影响.端基为酰氟(COF)的乙烯-四氟乙烯共聚物(ETFE)能促进PEEK结晶时的成核,加快PEEK的等温结晶速率,而聚四氟乙烯(PTFE)则会减慢PEEK的等温结晶速率.     

MFI/MFI核壳分子筛合成的影响因素及结晶动力学

以低硅铝比ZSM-5 为核, 采用二次生长法水热合成了MFI/MFI核壳分子筛. 发现对核相分子筛进行预处理是合成的关键步骤. 通过控制壳相合成过程(如合成温度、合成时间和核相分子筛加入量)可有效控制核壳分子筛的壳层生长. 以异丙苯(IPB)及1,3,5-三异丙苯(1,3,5-TIPB)裂解为探针反应, 发现与核相分子筛相比, 核壳分子筛的IPB裂解反应活性相当. 而1,3,5-TIPB裂解活性下降68%, 与外表面Al含量下降程度相近, 表明MFI/MFI核壳分子筛较好地保留了分子筛的核相反应活性. 结晶动力学计算结果表明, MFI/MFI核壳分子筛的成核活化能为51.5 kJ·mol-1, 生长活化能为26.5 kJ·mol-1.     

PET/PTT双组分弹性长丝的结晶取向结构和卷曲性能

为研制军官礼服用PET/PTT双组分弹性长丝,在纺丝加工工艺研究的基础上,通过声速法、WAXD、DSC、Instron5566对典型工艺下的弹性长丝进行了结晶和取向结构及卷曲性能的测试分析.在可纺的前提下,PET/PTT两组分复合纺丝中,PET组分优先结晶,具有高于其单组分纤维的拉伸诱导取向和结晶;而PTT组分只有形变,其结晶度和晶区取向均低于其对应的单组分纤维.在实验条件范围内,两组分粘度差异越大,纤维的卷曲伸长率和收缩率越大、声速取向因子增加、各单组分结晶度增加;两组分质量比为50/50时,纤维有最大的卷曲伸长率和收缩率,且各单组分结晶度随该两组分含量差异的增加而减少,而声速取向变化相反;随牵伸比的增加,纤维的整体取向、各组分结晶度均有所增加,卷曲伸长和收缩率也增加.牵伸温度和定型温度对双组分纤维的结构和卷曲性能影响较小.     

Thermal degradation and isothermal crystalline behavior of poly（trimethylene terephthalate）

Poly(trimethylene terephthalate)(PTT) is an excellent fiber material.Its thermal degradation and isothermal crystalline behaviors were in this study investigated using thermogravimetric analysis(TGA),thermogravimetric analysis-Fourier transform infrared spectroscopy(TGA-FTIR) analysis,differential scanning calorimetry(DSC) and X-ray diffraction(XRD).The thermal degradation mechanism of PTT follows Mclafferty rearrangement principle.The PTTwithintrinsicviscosity(Ⅳ) of 0.74 dL/g has a maximum crystallinity...     

Effect of Molecular Weight on the Properties of Poly（butylene succinate）

Poly（butylene succinate） （PBS） with different molecular weight was synthesized from 1, 4-butanediol and succinic acid by direct melt condensation. The synthesized PBS was identified by IH-NMR and FTIR spectrometry. The molecular weight was calculated from the intrinsic viscosity, and its value was between 20000 and 70000. The crystallization behavior and crystal morphology as function of molecular weight were investigated by DSC and PLM, respectively. The mechanical properties and hydrolytic degradation behaviors related with change of molecular weight were also studied in this work. The results demonstrated that the properties of PBS were determined by both molecular weight and crystallization properties （crystallinity as well as crystal morphology）. Our work is important for the design and preparation of PBS with proper molecular weight for its practical application.     

Influence of different inorganic salts on crystallization-driven morphological transformation of PCL-b-PEO micelles in aqueous solutions

Different inorganic salts, including NaSCN, NaCl, MgCl2 and Na2SO4, were added into the aqueous solution containing poly(ε-caprolactone)-b-poly(ethylene oxide)(PCL-b-PEO) semicrystalline micelles. The effects of inorganic salt on the micellar size and morphology were investigated with TEM and DLS. It is found that addition of NaSCN leads to increase of the micellar size, but the micelles remain to be spherical. By contrast, the other three inorganic salts can induce sphere-to-cylinder or sphere-to-lamella transformations of the PCL-b-PEO semicrystalline micelles. The alteration rate of the micellar size with the time after addition of the inorganic salts decreases in the following order: Na2SO4 NaCl ≈ MgCl2 NaSCN. These results were interpreted in terms of the "salting-out" ability of the cations and anions. The anions SO42- and Cl- have a stronger "salting-out" ability, driving the morphological transformations of the micelles and leading to a rapid change in micellar size. By contrast, SCN- has a weaker salting-out" ability. The cations Na+ and Mg2+ may associate with the PEO blocks, leading to a "salting-out" effect as well. However, the "salting-out" ability of cations is weaker than that of SO42- and Cl- anions, and the "salting-out" abilities of Na+ and Mg2+ are similar.     

How polydispersity of network polymers influences strain-induced crystal nucleation in a rubber

Network polymers in a rubber or a gel often contain non-uniform chain lengths. By means of dynamic Monte Carlo simulations of polymer mixtures with various compositions of two chain lengths, we investigated how the factor of polydispersity influences their strain-induced crystal nucleation. Under a high temperature and a high strain rate, the stretching of both polymers revealed that crystal nucleation is mainly accelerated by the presence of short-chain polymers; nevertheless, both polymers join together in the nucleation process. Further analysis proved that crystal nucleation is initiated from those highly stretched short segments, which are rich on the short-chain polymers.     

Crystallization Kinetics Study on Magnetron-Sputtered Amorphous TiA1 Alloy Thin Films

Crystallization kinetics of magnetron-sputtered amorphous TiAl ahoy thin films is investigated by differential scanning calorimetry through isothermal analysis and non-isotherm analysis. In non-isothermai analysis, the Kissinger method and the Ozawa method are used to calculate the apparent activation energy and local activation energy, respectively, in the crystallization processes of amorphous TiA1 thin films. Furthermore, the crystallization mechanism is discussed from the investigation of the A vrami exponent by isothermal analysis. In addition, x-ray diffraction is utilized to reveal the grain orientation and evolution during the crystallization of TiA1 thin fihns.