Gemini型表面活性剂疏水链中肉桂酸基团的光致二聚反应

采用紫外光谱、 红外光谱和质谱研究了Gemini型表面活性剂N,N'-二对丁氧基肉桂酰胺基胱氨酸钠(SDBCC)溶液的光化学反应过程和产物, 分析了SDBCC浓度对分子疏水链中肉桂酸基团光化学反应产物分布和光致二聚产率的影响. 结果表明, 在不同浓度下, SDBCC分子疏水链中的肉桂酸基团的光化学反应过程均以光致二聚反应为主, 且为分子内光致二聚产物. 但聚集体形成前后在光照过程中肉桂酸基团的光致二聚反应产率随SDBCC浓度的变化趋势不同, 聚集体形成前光致二聚反应产率随浓度的增加而增大, 聚集体形成后光致二聚反应产率随浓度的增大而减小. 综合光化学反应过程、 拓扑条件和聚集体结构进一步分析了胶束和囊泡的存在对SDBCC分子疏水链中肉桂酸基团光致二聚反应的影响.     

一种基于PVC膜电极的电位式葡萄糖传感器的研制

以三庚基十二烷基碘代季铵盐为电活性物质的PVC膜电极, 对过氧化氢和六价钼的络合物具有良好的电位响应. 将葡萄糖氧化酶固定到PVC膜电极表面, 制备成电位式葡萄糖传感器. 在优化的实验条件下, 该传感器在葡萄糖浓度为2×10^－4～5×10^－3 mol/L范围内有线性响应, 检测下限为5×10^－5 mol/L. 另外该传感器具有较高的稳定性和良好的选择性, 抗坏血酸、尿酸和一些氨基酸未对测定产生干扰.     

基于波长调制技术对强水蒸气干扰下痕量氨气的测量研究

本文采用免标定波长调制光谱技术结合修正算法实现了电厂脱硝过程中高浓度水蒸气干扰下的痕量逃逸氨浓度测量。分析和讨论了背景对实验测量信号的影响,选择信背比较高的四次谐波用于NH_3浓度的反演,并进行了实验验证。对于烟气中高浓度水蒸气的干扰,利用了H_2O强吸收峰位置标定绝对波数及NH_3吸收峰位置,此外本文提出的修正算法结合免标定波长调制算法可以同时实现H_2O和NH3浓度的准确反演,并通过实验验证了算法的正确性。最后将该修正方法应用于电厂逃逸氨浓度测量并获得了较为可靠的结果.     

采用改进PI迟滞模型的压电微夹钳前馈控制

为减小压电微定位平台的迟滞误差, 设计前馈控制器对其进行控制. 首先在使所建平台迟滞模型精度达到要求并使各阈值点精度相同的情况下, 对平台迟滞模型的阈值进行优化, 得到满足模型精度要求的最小算子数, 进而建立了平台的PI(Prandtl-Ishilinskii)迟滞模型通过对所建迟滞模型求逆, 设计出平台的前馈控制器; 最后在所设计的前馈控制作用下, 使平台达到5μm理想阶跃值的响应时间为0.01s稳态误差中线的变化范围为0.40~0.50μm 当期望平台输出最大值为17μm变幅值三角波位移时, 实测位移相对于理想位移的误差中线变动范围为1.15~ -0.05μm. 所设计前馈控制器可有效减小压电微定位平台的迟滞误差.     

热屏结构对泡生法蓝宝石单晶炉功率影响研究

蓝宝石晶体因优异的综合性能被广泛用于航空航天等高性能要求领域.泡生法是目前生产大直径蓝宝石单晶的主要方法,热场对生产工艺、产品质量和单晶炉功率具有重要影响;并将影响生产成本.本文对氧化锆及钼金属组合式热屏中氧化锆材料内置、外置及材料不同组合方式对泡生法蓝宝石单晶炉功率的影响进行研究,得到合理的热场结构;并与实际生产结果进行验证.结果表明:相比于传统的15层钼保温结构,加入氧化锆保温层会明显降低单晶炉能耗,其中氧化锆内置的热场结构对单晶炉能耗降低影响更为明显;随着氧化锆层由0增加至15层,单晶炉能耗显著降低,相比传统15层钼保温结构,15层氧化锆保温结构炉体功率降低了38;.     

力平衡法测量大气压强

依据力平衡法原理,重新构思、设计了测量大气压强的实验方案及装置,力学传感器的使用,提高了大气压强测量中的关键物理量的测量精度;采用最小二乘法,实现了大气压强的巧妙测量.     

Synchronization of the fractional-order generalized augmented L u¨system and its circuit implementation

In this paper, the synchronization of the fractional-order generalized augmented Lu¨ system is investigated. Based on the predictor–corrector method, we obtain phase portraits, bifurcation diagrams, Lyapunov exponent spectra, and Poincare′maps of the fractional-order system and find that a four-wing chaotic attractor exists in the system when the system parameters change within certain ranges. Further, by varying the system parameters, rich dynamical behaviors occur in the2.7-order system. According to the stability theory of a fractional-order linear system, and adopting the linearization by feedback method, we have designed a nonlinear feedback controller in our theoretical analysis to implement the synchronization of the drive system with the response system. In addition, the synchronization is also shown by an electronic circuit implementation for the 2.7-order system. The obtained experiment results accord with the theoretical analyses,which further demonstrate the feasibility and effectiveness of the proposed synchronization scheme.     

Finite-time sliding mode synchronization of chaotic systems

A new finite-time sliding mode control approach is presented for synchronizing two different topological structure chaotic systems. With the help of the Lyapunov method, the convergence property of the proposed control strategy is discussed in a rigorous manner. Furthermore, it is mathematically proved that our control strategy has a faster convergence speed than the conventional finite-time sliding mode control scheme. In addition, the proposed control strategy can ensure the finite-time synchronization between the master and the slave chaotic systems under internal uncertainties and external disturbances. Simulation results are provided to show the speediness and robustness of the proposed scheme. It is worth noticing that the proposed control scheme is applicable for secure communications.     

空间用GaN功率器件单粒子烧毁效应激光定量模拟技术研究

利用飞秒脉冲激光对氮化镓(GaN)功率器件进行单粒子烧毁效应定量评估技术研究,针对器件结构建立脉冲激光有效能量传输模型,理论计算了激光有效能量与重离子线性能量传输(LET)的等效关系并开展了试验验证.考虑器件材料反射率与吸收系数对激光的影响,针对介质层界面间的激光多次反射进行参数修正,减小有源区有效能量计算误差.选择一款氮化镓高电子迁移率晶体管(GaN HEMT)与一款肖特基势垒二极管(SBD)功率器件作为典型案例,分别开展飞秒脉冲激光正面与背部辐照试验,计算诱发单粒子烧毁的有效能量,并得到不同入射激光波长的烧毁等效LET阈值,对比了模型理论计算值与实际测量值.同时,研究结果对材料参数未知的GaN功率器件,提供了正面与背部辐照模型的激光试验波长选择参考.该工作将为激光定量评估空间用GaN等宽禁带半导体器件的单粒子烧毁效应机理研究及加固设计与验证提供技术支撑.     

High-sensitivity Bloch surface wave sensor with Fano resonance in grating-coupled multilayer structures

A new type of device consisting of a lithium niobate film coupled with a distributed Bragg reflector (DBR) was theoretically proposed to explore and release Bloch surface waves for applications in sensing and detection. The film and grating made of lithium niobate (LiNbO₃) were placed on both sides of the DBR and a concentrated electromagnetic field was formed at the film layer. By adjusting the spatial incidence angle of the incident light, two detection and analysis modes were obtained, including surface diffraction detection and guided Bloch detection. Surface diffraction detection was used to detect the gas molecule concentrations, while guided Bloch detection was applied for the concentration detection of biomolecule-modulated biological solutions. According to the drift of the Fano curve, the average sensor sensitivities from the analysis of the two modes were 1560 °/RIU and 1161 °/RIU, and the maximum detection sensitivity reached 2320 °/RIU and 2200 °/RIU, respectively. This study revealed the potential application of LiNbO₃ as a tunable material when combined with DBR to construct a new type of biosensor, which offered broad application prospects in Bloch surface wave biosensors.