塑料光纤相位调制灵敏度的研究

研究了压电涂层PMMA纤芯塑料光纤中的相位调制.射频信号通过对光纤外层的压电涂层作用,使纤芯中产生应变,从而对光纤中的光信号进行相位调制.数值计算结果表明,与传统的石英光纤相比,PMMA塑料光纤的相位调制的灵敏度要高数十倍以上.     

The transient suppression for piezoelectric ceramic emission transducer

A transient suppression method for piezoelectric ceramic transducer is presented. By adding some special pedestal pulses to the original transmitted signal, the transient effects in the output of the transducer can be just precisely transmission by use of a narrowband transducer. canceled, thereby achieving the broadband The experimental results show that the transient responses of the sinusoid pulses and coded signals are suppressed successfully and the acoustic waveforms radiated into the surrounding water are improved significantly.     

20单元双压电片变形反射镜的影响函数有限元分析和实验测量

影响函数是分析双压电片变形反射镜像差校正能力的重要参量,通过建立有限元模型预测实际器件的影响函数,以有限元模型的不断优化替代实际器件的尝试性改进,可以减小构造的盲目性,从而节约研发成本,缩短双压电片变形镜的实用化进程.采用Veeco干涉仪测量了20单元双压电片变形反射镜的影响函数,同时建立有限元模型进行了相应计算,并将计算结果与实际器件的测量数据进行了对比分析.结果表明,相对于实测数据而言,有限元模型计算得出的影响函数在量值上略有偏小,但其形状和峰值位置与测量数据一致性好,两者对前35项泽尼克像差的拟合曲线也基本吻合,各项拟合误差系数之差皆小于0.1.这说明通过不断改进有限元模型实现对实际器件的优化设计是切实可行的.     

（Na0.52K0.44Li0.04）Nb0.9-xSbxTa0.1O3 Lead-Free Piezoelectric Ceramics with High Performance and High Curie Temperature

（Na0.52K0.44Li0.04）Nb0.9-x Sbx Ta0.1O3 lead-free piezoelectric ceramics are prepared by a solid-state reaction method. With increasing Sb content, the transition temperature from orthorhombic to tetragonal polymorphic phase decreased. A composition （Na0.52K0.44Li0.04）Nb0.863Sb0.037Ta0.1O3 is found to possess excellent piezo- electric and electromechanical performances （d33 = 306pC/N, kp =48%, and kt=50%）, and high Curie temperature （Tc = 320 ℃）. These results indicate that （Na0.52K0.44Li0.04）Nb0.863Sb0.037 Ta0.1O3 is a promising lead-free piezoceramics replacement for lead zirconate titanate.     

Transient Non-Thermal Mobility of CO for CO--NO Catalytic Reaction on Square Lattice: Monte Carlo Simulation

We study a model based on precursor mechanism for CO-NO catalytic reaction on square lattice with Monte Carlo simulation. The precursor mechanism clearly demonstrates its impact on the phase diagram. The steady reactive state （SRS） gets established. The width of reactive region increases by increasing the range of precursor mobility. When the precursor mobility is increased to third-nearest neighbourhood, the second-order transition disappears.     

Phase Transition and High Piezoactivity of Sr Doped Lead-Free （Na0.53K0.422Li0.048） （Nb0.89Sb0.06Wa0.05）O3 Ceramics

Lead-free piezoelectric ceramics （Na0.53K0.422Li0.048 ） （Nb0.89Sb0.06 Ta0.05 ）03 （NKLNST） ＋ x tool SrCO3 are prepared by conventional solid state sintering method. The specimens with pure perovskite structure show tetragonal phase at x 〈 0.01, and become pseudo-cubic phase at x 〉 0.02. A lattice parameter discontinuity is found in the specimens with 0.004 〈 x 〈 0.0075, along with a great improvement in piezoactivity. The 0.004 mol SrCO3 added NKLNST ceramics possesses outstanding performances of kp = 0.53, kt = 0.26, and d33=309 pC/N. Moreover, the Sr^2＋ modification inhibits the gra/n growth, decreases the Curie temperature, and induces a diffuse phase transition.     

Distributed Measurement of Birefringence by P-OTDR Assisted with Piezoelectric Polarization Controller

We propose a new polarization sensitive optical time domain reflectometry （P-OTDR） setup assisted with a piezoelectric polarization controller （PPC）. The input state of polarization can be changed by varying the voltage of PPC without any rotatable instrument, and only one optical receiver is used to detect the backward beam. We measure a single mode fibre and get the distribution of birefringence along the SMF.     

Effects of Li Substitution and Sintering Temperature on Properties of Bi0.5（Na,K）0.5TiO3 Lead-Free Piezoelectric Ceramics

Bi0.5 （Na0.72K0.28- x Lix ）0.5 TiO3 （BNKLT- 100x） lead-free piezoelectric ceramics are synthesized by conventional solid state sintering techniques. The dielectric and piezoelectric properties of the BNKLT-100x ceramics as a function of Li content are systematically investigated. It is found that not only Li content but also the sintering temperature has a strong effect on the piezoelectric properties of BNKLT. The piezoelectric constant d33 Of BNKLT varies from 120 to 252pC/N in the Li content range from 0.03 to 0.16. In the sintering temperature range from 1080 to 1130℃, the d33 value of BNKLT-6 changes from 200pC/N to 252pC/N. The BNKLT-6 sample sintered at 1100℃ has the highest piezoelectric constant d33 of 252pC/N, with the electromechanical coupling factors kp of 0.32 and kt of 0.44.     

具有压电分流电路薄板的吸声特性Ⅱ.数值和实验分析

利用数值计算和实验方法研究了压电分流阻尼技术控制薄板吸声特性的机制,分析了串联电阻和电感与薄板吸声系数、相对声阻和相对声抗之间的关系.数值计算和实验结果表明:通过调节分流电路中电感和电阻等参数,可使电路谐振和机械谐振出现强耦合,进而明显提高薄板一阶模态处的吸声系数和吸声带宽.     

对高频声子的探测

晶体中的原子在其平衡点附近的摇晃会产生振动波,即声子．声子能在固体中传播声、热能和其他形式的能量,测量声子的性质可以提供有关晶体的结构以及原子间相互作用的各种信息．声子的性质一般是利用与光子的声一光相互作用来测定的．但当声波的波长小到只有原子间距的大小时,就很难利用声一光作用来探测声子了．因此,尽管有许多科学家都认为,在固体中已激发出了高频声子,但却无法用直接或间接的方法来精确地测定它们．