延性材料平面冲击波基本实验数值模拟的若干问题

假设屈服强度正比于剪切模量,分别构建了四种强度模型,并用于数值模拟Ly12铝的平面冲击波试验的质点速度剖面以及钨合金的平面冲击波试验的锰铜计应力记录.研究发现,基于Steinberg等的屈服强度模型比较符合实验.还对平面冲击波试验的层裂现象进行了简化的数值模拟,其中,采用了该文作者所提出的一种基于空穴聚集的层裂模型,该模型的特点是分别引入了层裂过程的早期及后期应力松弛方程.     

L-leap-accelerating the stochastic simulation of chemically reacting systems

Presented here is an L-leap method for accelerating stochastic simulation of well-stirred chemically reacting systems,in which the number of reactions occurring in a reaction channel with the largest propensity function is calculated from the leap condition and the number of reactions occurring in the other reaction channels are generated by using binomial random variables during a leap.The L-leap method can better satisfy the leap condition.Numerical simulation results indicate that the L-leap method can obtain better performance than established methods.     

促进其线性频散特征另一种形式的Bousinesq方程

Ｂｏｕｓｉｎｅｓｑ方程能够用于模拟表面重力波传播过程中的折射、绕射、反射以及浅化，非线性作用等现象．用不同垂直积分方法所得到的二维Ｂｏｕｓｓｉｎｅｓｑ方程形式具有不同的线性频散特征．采用两个不同的水深层的水平速度变量组合，推导出一个新形式的Ｂｏｕｓｉｎｅｓｑ方程．通过对其参数的设置可得到精确的线性频散解Ｐａｄｅ近似４阶精度．其适用范围已由原来的浅水，向深水拓进．相速误差小于２％，其拓展适用范围可达到０８个波长水深．应用所得到的新型Ｂｏｕｓｉｎｅｓｑ方程，采用有限差分法，对经典工况进行了数值模拟，其计算结果表明，计算值与物模实验值吻合较好．这说明本文新形式的Ｂｏｕｓｓｉｎｅｓｑ方程对变水深非线性效应所产生的能量频散有着较为精确的描述     

A quasi-flow constitutive model with strain-rate dependence

In this paper, the proposed is a quasi-flow constitutive model with strain-rate sensitivity for elastic plastic large deformation. The model is based on the Quasi-flow Corner theory, and is suitable for the sheet metal forming process simulation with a variable punch machine velocity. Uniaxial tensile tests and deep-drawing tests of a circular blank with square punch are carried out and numerically simulated. The consistency between the experimental and the numerically simulated results shows the validity of the present new constitutive model. The project supported by the Scientific Foundation of National Outstanding Youth of China (10125208), the National Natural Science Foundation of China (19832020), and the National Education Committee of China     

自紧身管临界裂纹尺寸的概率断裂力学研究

基于概率断裂力学理论和Mome Caflo模拟方法，本文进行了自紧身管临界裂纹尺寸的可靠性研究。自紧身管内表面的疲劳裂纹考虑为半椭圆形式。裂纹尖端处的应力强度因子由内压和自紧残余应力共同产生。自紧残余应力采用了符合身管材料具有强化和包辛格效应性能推导的公式计算，它产生的应力强度因子通过权函数方法得到。根据断裂准则，可计算出自紧身管的临界裂纹尺寸。实例分析表明，对数正态分布为临界裂纹尺寸的最佳分布，同时给出了在各种置信度和可靠度下自紧身管的临界裂纹尺寸。     

Melnikov方法在输流管混沌运动研究中的应用

对基础简谐运动激励下两端固定输流管道的混沌运动进行了研究，推导出了系统的运动方程，确定了系统存在的平衡点及其稳定性，计算出了未扰系统的同宿轨道，并利用Melnikov方法得到了系统发生混沌运动时参数需满足的临界条件，同时还利用相平面图和：Poincare映射等方法对管道的混沌运动进行了数值模拟，通过比较发现，由Melnikov方法确定的临界参数值要稍小于数值模拟中首次观察到混沌运动时对应的临界值。     

冲击消振器的概周期碰振运动分析

建立了冲击消振器对称周期运动的Poincar啨映射方程 ,讨论了对称周期运动的稳定性与局部分岔。通过数值仿真研究了冲击消振器在非共振、弱共振和强共振条件下的概周期碰振运动及其向混沌的转迁过程。     

Theoretical statistical solution and numerical simulation of heterogeneous brittle materials

The analytical stress-strain relation with heterogeneous parameters is derived for theheterogeneous brittle materials under a uniaxial extensional load, in which the distributions of theelastic modulus and the failure strength are assumed to be statistically independent. This theoreticalsolution gives an approximate estimate of the equivalent stress-strain relations for 3-D heterogeneousmaterials. In one-dimensional cases it may provide comparatively accurate results. The theoreticalsolution can help us to explain how the heterogeneity influences the mechanical behaviors, Further, anumerical approach is developed to model the non-linear behavior of three-dimensional heterogeneousbrittle materials. The lattice approach and statistical techniques are applied to simulate the initialheterogeneity of heterogeneous materials. The load increment in each loading stage is adaptivelydetermined so that the better approximation of the failure process can be realized. When the maximumtensile principal strain exceeds the failure strain, the elements are considered to be broken, which canbe carried out by replacing its Young‘s modulus with a very small value. A 3-D heterogeneous brittlematerial specimen is simulated during a full failure process. The numerical results are in good agreementwith the analytical solutions and experimental data.     

融合伪距和载波相位的DGPS/惯性组合导航

本文利用卡尔曼滤波方法对码伪距测量和载波相位测量进行了最优融合，并得到了融合后的伪距测量误差标准差曲线，用融合后的伪距作为观测量和惯导系统进行组合，可以有效地提高导航精度，避免整周模糊度的确定。本文研究了这种组合导航系统，进行了仿真试验，仿真结果表明该组合系统的精度得到了很大的提高，定位精度在1m以内，是一种高精度的导航系统。     

含动脉分支的体循环模拟实验系统

本文首先建立了含分支动脉的血液体循环集中参数模型，在计算机仿真研究的基础上，设计、研制出含主要动脉分支的体循环模实验系统，系统由微机实施控制，数据采集与处理。实验结果表明它既可较好地模拟左心室、主动脉弓附近的血流动力学特性，同时又可较好地模拟左锁骨下动脉、挠动脉处的血流压力脉搏波基本特征。