A new ellipse fitting method of the minimum differential-mode noise in the atom interference gravimeter

Ellipse fitting is a useful tool to obtain the differential signal of two atom interference gravimeters. The quality standard of ellipse fitting should be the deviation between the true phase and the fitting phase of the interference fringe. In this paper, we present a new algorithm to fit the ellipse. The algorithm is to minimize the differential noise of two interference gravimeters and obtain a more accurate value of the gravity gradient. We have theoretically derived the expression of the differential-mode noise and implemented the ellipse fitting in the program. This new algorithm is also compared with the classical methods.     

Nanoforest-like CdS/TiO_2 heterostructure composites:Synthesis and photoelectrochemical application

In this study, TiO_2 nanoforest films consisting of nanotubes have been synthesized by a simple hydrothermal method and a subsequent sintering technique. The hydrothermal reaction time is important for the controlling of the nanotube diameter and the specific surface area of holistic TiO_2 films. When the hydrothermal process reaction time is up to 8 hours,the diameter of the nanotube is about 10 nm, and the specific surface area of TiO_2 nanoforest films reaches the maximum.CdS nanoparticles are synthesized on TiO_2 nanoforest films by the successive ionic layer adsorption and reaction(SILAR)technique. The transmission electron microscope(TEM) and energy dispersive x-ray spectroscopy(EDX) mapping results verify that TiO_2/CdS heterostructures are realized. A significant red-shift of the absorption edge from 380 nm to 540 nm can be observed after the pure TiO_2 film is sensitized by CdS nanoparticles. Under irradiation of light, the current density of the optimal TiO_2/CdS photoanode is 2.30 mA·cm-2 at 0 V relative to the saturated calomel electrode(SCE), which is 6 times stronger than that of the pure TiO_2 photoanode. This study suggests that the TiO_2 nanoforest consisting of interlinked pony-size nanotubes is a promising nanostructure for photoelectrochemical.     

流动注射-分光光度法测定自来水中游离氯的研究

设计了游离氯流动注射自动在线检测仪,并研究了仪器的最佳测试条件.该仪器采用改进的N,N-二乙基-1,4-苯二胺(DPD)比色原理,通过流动注射进样技术,结合光电转化、数字信号处理及自动化控制技术,克服了DPD分光光度法中手工操作的缺陷,实现了样品分析的自动化.结果证明,此系统的试剂用量少、测定范围宽(0.05～6.00...     

导电聚合物构建的高性能固态离子选择电极

基于最新研究文献和自身研究工作,系统总结了以导电聚合物构建的各种高性能固态离子选择电极.导电聚合物所特有的共轭结构以及电子导电和离子导电的双重导电功能使其可以作为离子-电子转换器,从而实现对离子的传感响应与探测.由聚苯胺、聚吡咯和聚噻吩等导电聚合物为转换中间层而构建的离子选择电极可以实现纳摩尔浓度水平的离子传感探测,有望在环境监测、药物医疗和食品安全等诸多方面发挥重要作用.     

二氨基马来腈共聚合改性氮化碳光催化剂

利用二氨基马来腈(DMNA)与二聚氰胺(DCDA)的高温共聚合反应, 制备了石墨相氮化碳 (g-C₃N₄), 并通过X射线衍射(XRD)、傅里叶变换红外(FT-IR)光谱、透射电镜 (TEM)、氮气吸脱附实验 (N₂-sorption)、电子顺磁共振 (EPR)、紫外-可见漫反射光谱 (UV-Vis DRS) 和荧光 (PL) 光谱等表征手段,系统考察了共聚合改性对g-C₃N₄晶体结构、化学结构、能带结构、织构、光吸收性能和光催化性能等的影响.研究结果表明:共聚合改性后氮化碳材料仍保持石墨相晶体结构, 但其π电子的离域性增强, 并在催化剂表面产生异质结构, 进而提高了氮化碳在可见光区域的光吸收性能, 并促进了光生载流子的有效分离. 性能评价结果显示, DMNA改性的氮化碳在可见光下光催化产氢活性明显高于未改性的样品, 当DMNA用量为0.01g时, 催化剂的产氢速率最高, 达到45.0 μmol·h^-1, 为纯氮化碳样品的4.5倍.     

球形纤维素吸附剂对Cu~(2+)的吸附动力学与热力学研究

以离子液体([Bmim]Cl)为反应介质,丙烯酸为单体,对纤维素进行均相接枝共聚,并采用油包水反相悬浮技术制得球形纤维素吸附剂。采用静态吸附实验方法研究了该吸附剂对水溶液中Cu2+的吸附性能,包括各种因素(溶液pH值,溶液初始浓度,吸附时间,吸附温度)对吸附效果的影响。研究结果表明,适当提高溶液pH值,增加溶液初始浓度,以及延长吸附时间都有利于改善吸附效果;球形纤维素吸附剂对Cu2+的吸附符合Langmuir吸附等温式,吸附过程是自发的放热过程;吸附剂对Cu2+的吸附符合二级吸附动力学模型,吸附过程由膜扩散和颗粒内扩散联合控制。球形纤维素吸附剂对Cu2+的具有很好的吸附性并具有良好的再生性能,可以循环使用。     

2-(3,5-二溴-2-吡啶偶氮)-5-二乙氨基苯酚作络合滴定指示剂连续测定铁和铝

对2-(3,5-二溴-2-吡啶偶氮)-5-二乙氨基苯酚作铁(Ⅲ),铜(Ⅱ)的配位滴定指示剂进行了研究.在pH1.8～2.0时用EDTA标准溶液滴定铁(Ⅲ).在滴定铁(Ⅲ)后的溶液中,加入对铝过量的EDTA标准溶液,在pH3.8～4.0煮沸下,铝(Ⅲ)与EDTA生成稳定的络合物,过量的EDTA用硫酸铜标准溶液滴定,从而测定铝(Ⅲ).     

2—（3,5—二溴—2—吡啶偶氮）—5—二乙氨基苯酚作络合滴定指示剂连续测 …

对２－（３,５－二溴－２吡啶偶氮）－５－二乙氨基苯酚作铁（Ⅲ）,铜（Ⅱ）的配位滴定指示剂进行了研究。在ＰＨ１．８￣２．０时用ＥＤＴＡ标准溶液滴定铁（Ⅱ）。在滴定铁（Ⅲ）后的溶液中,加处对铝过量的ＥＤＴＡ标准溶液,在ＰＨ３．８￣４．０煮沸下,铝（Ⅲ）与ＥＤＴＡ生成稳定的络合物,过量的ＥＤＴＡ用硫酸铜标准溶液滴定,从而测定铝（Ⅲ）（。