The influence of hydrogen chloride doping level on the complex refractive indices of anisotropic polyaniline film: Application of a new internal reflection waveguide coupling technique

Nondestructive three‐dimensional refractive‐index measurements are used for the determination of both crystallinity and orientation in thin polymer films. The prism waveguide coupler is particularly suitable for three‐dimensional isotropic and anisotropic thin‐film studies because of the quantitative character of the information obtained and the ease of data acquisition. It has been limited, however, to measuring the refractive index of optically transparent or weakly absorbing films. This study shows that a modified prism waveguide coupler can be used to determine the complex refractive index over a range from transparent to highly absorbing films from the internally reflected light intensity. Thus, both the refractive index, n, and the extinction coefficient, k, can be obtained. This method is used to determine the anisotropic three‐dimensional n and k values of spin‐coated emeraldine base and hydrogen chloride doped emeraldine salt polyaniline films. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2481–2490, 2001     

宽带消波长依存波导耦合器的统计优化设计

提出了一种适合于宽带消波长依存波导耦合器的统计优化设计方法。使用该方法 ,在 12 80nm～ 165 0nm带域内 ,对Si基SiO2 光波导作了包括偏振变动优化在内的 5 0 %和 2 0 %功率耦合比的消波长依存波导耦合器的设计。两个器件经三维波束传播法 (BPM)模拟运行验证 ,结果表明 ,在 370nm宽带内 ,两个直交偏振态均实现了功率耦合比为 (5 0± 2 .1) %和 (2 0± 1.4) %、偏振变动量分别小于 0 .65 %和 0 .2 0 %的良好特性     

Resonant waveguide grating: Analysis of polarization independent filtering

We investigate the property of polarization independent reflection using a 1D grating. It is shown to be possible, by choosing the correct parameters of the structure and angle of incidence to adjust the bandwidth of the reflection curves for both polarizations in such a way that these coincide. We expect that the found polarization-independent narrow band filter can be used as a component for WDM applications.     

Vector-FEM Analysis of Millimeter Wave Circulator with SOC Truncation Technique

In this paper, the application of the edge-based vector finite element method combined with the short-open calibration (SOC) technique to waveguide junction circulators was presented. By applying permittivity and permeability tensors, the functional formula for tetrahedral vector elements are analytically derived in terms of the electric field strength. And the SOC technique is directly accommodated in the FEM algorithm and used to truncate the computational domain. The SOC technique removes or separates unwanted parasitics brought by the approximation of the impressed voltage source and also the problem of resulting inconsistency between different simulations. Truncation of computational domain by SOC technique makes the iterative solvers for large-sparse linear matrix equations from FEM converge much faster than by perfectly matching layers (PML). The analysis of three 2-port networks is sufficient to form the admittance matrix of the corresponding three-port waveguide junction circulators. To validate the theory, typical three-dimensional numerical results of isotropic dielectric-filled discontinuity are first presented and compared with other hybrid numerical techniques. Further, the ferrite filled waveguide junction circulators are analysed and compared with the measured and available publications. The comparison shows that good agreement is obtained.     

Design of a Rectangular to Circular Groove Waveguide Transition by Finite Element Method

A rectangular to circular groove waveguide transition is described in millimeter-wave band. The transition maintains a constant cutoff wavelength. Using the Finite Element Method, the size of the variable cross-section throughout the transition are calculated and the transition is designed.     

圆柱开槽波导FEM放大器数值研究

以圆柱开槽波导、螺旋摇摆器为模型,考虑了电子初始速度零散、引导磁场等效应对放大器饱和特性的影响,导出了自洽的注波互作用三维非线性方程组.并在此基础上编制了相应的计算软件,通过数值分析的方法研究了圆柱开槽波导自由电子激光放大器的饱和效率、频带宽度等高频特性.     

索末菲球面波公式的协变形式及其在光纤理论中的应用

说明了球面行波的索末菲公式在坐标转动下不协变.证明了球面波的驻波表示是协变的,因而是一个物理的关系式,故适用于圆柱坐标中各类波动方程的定解问题.作为一个例,应用于光纤光学,导出了受导简正模和辐射模的表达式,以及各模式的强度分布 关键词： 索末菲公式 协变性 光纤光学 波导理论     

光折变晶体中光诱导波导的折射率分布

分别讨论了亮孤子和暗孤子在光折变晶体中诱导波导的折射率分布,结果表明光诱导波导的折射率分布除与光强的倒数有关外,还与光强对数的一阶导数有关.后者对折射率的影响引起波导折射率的非对称性分布.     

侧链型聚合物DANS-PMMA脊形条波导的制备

有机聚合物的紫外漂白,经过一系列复杂的光化学反应,会使聚合物薄膜的折射率和厚度降低。在此基础上,利用金属掩模对聚合物薄膜进行选择性紫外漂白,制备出了聚合物脊形条波导。紫外漂白不需要对聚合物薄膜进行光刻和腐蚀便可获得边缘和表面比较整齐和光滑的脊形条波导,对减少波导的散射损耗十分有利。本文介绍了利用紫外漂白和金属掩模方法制备侧链型聚合物DANS（4－dimethylamino-4’nitro-stlibene)-PMMA(polymethyl methacrylate)脊形条波导的工艺过程,并对关键工艺进行了讨论。     

全息波导显示系统中输出光栅的优化

全息波导显示系统中输出光栅的衍射效率、位置和长度对整个显示系统的光强输出均匀性及能量利用率有重要的影响.通常输出光强均匀性由输出光栅的衍射效率决定,能量利用率受多重光栅的位置和长度影响.本文以中心视场光束的输出光强均匀为目的,对相应输出光栅衍射效率的位置分布进行优化与曲线拟合,得到输出光栅衍射效率随输出位置连续递增的分布曲线,并应用到所有视场光束.计算结果表明,相比于传统阶梯状衍射效率分布输出光栅,全息波导显示系统中采用具有连续衍射效率分布输出光栅时的光强输出均匀性得到明显提升.针对部分衍射光束未能进入出瞳的现象,提出错位优化法,按照出瞳大小和使用距离优化各重输出光栅的位置和尺寸,减小了光栅的无效衍射区域,提高了出瞳范围内的能量利用率.