A regenerative ratiometric electrochemical biosensor for selective detecting Hg based on Y-shaped/hairpin DNA transformation

Inspired by dual-signaling ratiometric mechanism which could reduce the influence of the environmental change, a novel, convenient, and reliable method for the detection of mercury ions (Hg²⁺) based on Y-shaped DNA (Y-DNA) was developed. Firstly, the Y-DNA was formed via the simple annealing way of using two different redox probes simultaneously, omitting the multiple operation steps on the electrode. The Y-DNA was immobilized on the gold electrode surface and then an obvious ferrocene (Fc) signal and a weak methylene blue (MB) signal were observed. Upon addition of Hg²⁺, the Y-DNA structure was transformed to hairpin structure based on the formation of T-Hg²⁺-T complex. During the transformation, the redox MB gets close to and the redox Fc gets far away from the electrode surface, respectively. This special design allows a reliable Hg²⁺ detection with a detection range from 1 nM to 5 μM and a low detection limit down to 0.094 nM. Furthermore, this biosensor exhibits good selectivity and repeatability, and can be easily regenerated by using l-cysteine. This study offers a simple and effective method for designing ratiometric biosensors for detecting other ions and biomolecules.     

Influence of thermal treatment on OSL regeneration in potassium chloride

Optically stimulated luminescence (OSL) of pure analytical potassium chloride (KCl) prepared in two different forms (crystals and pellets) was studied. The occurrence of regeneration effect (self-renewal of the OSL signal) in the material was examined. The experiments using the variable delay OSL (VD-OSL) method were carried out. Performed measurements allowed to determine time scale of the phenomenon, as well as quantitative changes of regeneration depending on thermal treatment before and after irradiation. Significant increase of the OSL regeneration was noticeable for pellets after the application of the annealing before irradiation, while for crystals a substantial decrease of regeneration was observed. Preheating applied after irradiation caused that self-renewal of OSL signal was drastically reduced or completely suppressed depending on the form of KCl samples.     

A continuous time markov-renewal replacement model for manpower systems

A continuous time Markov-renewal model is presented that generalizes the classical Young and Almond model for manpower systems with given size. The construction is based on the associated Markov-renewal replacement process and exploits the properties of the embedded replacement chain. The joint cumulant generating function of the grade sizes is derived and an asymptotic analysis provides conditions for these to converge in distribution to a multinominal random vector exponentially fast independently of the initial distribution, both for aperiodic and periodic embedded replacement chains. A regenerative approach to the wastage process is outlined and two numerical examples from the literature on manpower planning illustrate the theory.     

Two other views of the traditional net risk premium rate

We assume that an insurance concern operates in a finite population of N insurable risks and that the number of insured risks is a birth-death process. Each insured risk is insured indefinitely. It is proved that there are three equivalent ways of calculating the net risk premium rate for each insured risk. An intuitive explanation is given for each of these net rates.     

New deep eutectic solvents composed of crown ether,hydroxide and polyethylene glycol for extraction of non-basic N-compounds

A new family of deep eutectic solvents (DESs) induced by small amounts of crown ether complex and formed mainly by polyethylene glycol was found.     

疏水多孔硅制备及其对水中有机污染物的吸附

以硅酸钠为硅源,盐酸为催化剂,三甲基氯硅烷(TMCS)为表面改性剂,经溶胶-凝胶和表面改性过程制备出一种疏水性多孔硅材料.采用傅里叶变换红外(FTIR)光谱仪、接触角分析仪、氮气物理吸附仪和扫描电子显微镜(SEM)对其结构和性质进行表征.结果表明:所制备的多孔硅具有分等级孔道结构(中孔-大孔),比表面积为566m2·g-1,孔体积高达2.28cm3·g-1,多孔硅与水的接触角为156°,显示出超疏水特征.对甲苯、汽油、柴油和润滑油的吸附量均可高达自身质量的14倍,丰富的孔道使其在几分钟内即可达到饱和吸附.这种多孔硅在汽油/水混合体系中对汽油具有较高的选择性,同时具有良好的再生能力.经正己烷萃取再生后,多孔硅仍能基本保持初始吸附容量.此方法制备的多孔硅材料在吸附分离污水中的有机物和溢油处理方面具有很好的应用前景.     

新型芳香三嗪超交联多孔聚合物去除水溶液中甲基橙

Organic dyes, especially the harmful cationic dye methyl orange (MO), are emerging pollutants. The development of new materials for their efficient adsorption and removal is thus of great significance. Porous organic polymers (POPs) such as hyper-cross-linked polymers, covalent organic frameworks, conjugated microporous polymers, and polymers with intrinsic microporosity are a new class of materials constructed from organic molecular building blocks. To design POPs both with good porosity and task-specific functionalization is still a critical challenge. In this study, we have demonstrated a simple one-step method for the synthesis of the hyper-cross-linked aromatic triazine porous polymer (HAPP) via the Friedel-Crafts reaction. The resultant porous polymer was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, elemental analysis (EA), thermo-gravimetric analysis (TGA), solid-state ¹³C nuclear magnetic resonance (¹³C NMR), and nitrogen adsorption-desorption isotherms. The results show that HAPP is a rough, irregular morphology, porous organic polymer that is amorphous in nature. The novel polymer showed high Brunauer-Emmett-Teller surface area (of up to 104.36 m²∙g⁻¹), porosity, and physicochemical stability. Owing to the presence of N heteroatom pore surfaces in the network, the material exhibited a maximum adsorption capacity of 249.3 mg∙g⁻¹ for MO from aqueous solutions at room temperature. This is higher than that of some reported porous materials under the same conditions. To explain this phenomenon more clearly, theoretical quantum calculations were performed via the DFT method using Gaussian 09 software and Multiwfn version 3.4.1. It is performed to analyze the properties and electrostatic potential (ESP) of the HAPP monomer and MO. The results indicated that the N heteroatom of HAPP can easily develop strong interactions with MO, supporting the efficient adsorption of MO. The parameters studied include the physical and chemical properties of adsorption, pH, contact time, and initial concentrations. The percentage of MO removal increased as the pH was increased from 2 to 4. The optimum pH required for maximum adsorption was found to be 5.6. Adsorption kinetics data were modeled using the pseudo-first-order and pseudo-second-order models. The results indicate that the second-order model best describes the kinetic adsorption data. The adsorption isotherms revealed a good fit with the Langmuir model. More importantly, the HAPP can be regenerated effectively and recycled at least five times without significant loss of adsorption capacity. Therefore, it is believed that HAPPs with hierarchical porous structures, high surface areas, and physicochemical stability are promising candidates for the purification and treatment of dyes in solution.     

Selenide‐chitosan as High‐performance Nanophotocatalyst for Accelerated Degradation of Pollutants

Water pollution is one of the major global challenges today. Water bodies are contaminated by the heavy release of waste effluents of textile industries, which includes intensively colored dye pollutants. Herein, a ternary nanocomposite of bismuth copper selenide with small particle size and ternary metal selenide (TMS)‐chitosan microspheres (TMS‐CM) of the spherical porous surface were successfully synthesized. SEM, XRD, EDX, FTIR, and UV/Vis spectrophotometry analysis revealed the structural and morphological characteristics of the newly synthesized nanocomposites. SEM imaging showed the average diameter of TMS nanoparticle to be 33 nm. The crystal size was calculated as 6.33 nm and crystalline structure as orthorhombic using XRD findings. EDX confirmed the presence of Bi, Cu, and Se in the ternary nanocomposite. The bandgap of 1.8 eV was calculated from Tauc's plot for the TMS nanocomposite. SEM confirmed the successful synthesis of spherical TMS‐CM microspheres of porous surface morphology with an average size of 885.6 μm. The presence of chitosan microspheres in the synthesis of TMS nanocomposite was identified by FTIR spectral analysis. Furthermore, highly efficient photocatalytic degradation (up to 95.4%) of ARS was achieved within 180 min at pH 4.0 using 0.5 g of TMS‐CM in sunlight. The first‐order kinetic model fitted well to the photocatalytic decontamination of ARS using TMS‐CM with a rate constant of 6.1x10^?2 min^?1. The TMS‐CM gave attractive results and high efficiency in photocatalytic degradation of ARS dye after reusing and regeneration of up to seven successive cycles. The newly synthesized nanophotocatalyst could be efficiently used for the decontamination of dye polluted water from textile industries.     

Comparison of light-induced degradation and regeneration in P-type monocrystalline full aluminum back surface field and passivated emitter rear cells

This paper reports on a systematic and quantitative assessment of light induced degradation (LID) and regeneration in full Al-BSF and passivated emitter rear contact cells (PERC) along with the fundamental understanding of the difference between the two. After LID, PERC cells showed a much greater loss in cell efficiency than full Al-BSF cells (∼0.9% vs ∼0.6%) because the degradation in bulk lifetime also erodes the benefit of superior BSRV in PERC cells. Three main regeneration conditions involving the combination of heat and light (75 °C/1 Sun/48 h, 130 °C/2 Suns/1.5 h and 200 °C/3 Suns/30 s) were implemented to eliminate LID loss due to BO defects. Low temperature/long time (75 °C/48 h) and high temperature/short time (200 °C/30s) regeneration process was unable to reach 100% stabilization. The intermediate temperature/time (130 °C/1.5 h) generation achieved nearly full recovery and stabilization (over 99%) for both full Al-BSF and PERC cells. We discussed the effect of temperature, time and suns in regeneration mechanism for two cells.