小型化外腔可调谐THz参量振荡器

基于LiNbO3晶体垂直表面输出技术,设计了一台小型化外腔THz参量振荡器。利用小型化灯1064 nm脉冲激光器泵浦MgO:LiNbO3,通过优化设计三波非共线相位匹配的光学参量振荡腔结构,实现THz垂直晶体表面输出,减少LiNbO3晶体对THz波的吸收,提高了THz波输出光束质量。当在泵浦光能量为128 mJ、重复频率为10 Hz时,获得THz波的调谐范围为0.69~3.01 THz,在1.6 THz处获得THz波最大平均功率为10.8 W,脉冲宽度为10 ns,对应THz波能量转换效率为8.4310-6。     

Theoretical and experimental study on broadband terahertz atmospheric transmission characteristics

Broadband terahertz(THz) atmospheric transmission characteristics from 0 to 8 THz are theoretically simulated based on a standard Van Vleck–Weisskopf line shape, considering 1696 water absorption lines and 298 oxygen absorption lines.The influences of humidity, temperature, and pressure on the THz atmospheric absorption are analyzed and experimentally verified with a Fourier transform infrared spectrometer(FTIR) system, showing good consistency. The investigation and evaluation on high-frequency atmospheric windows are good supplements to existing data in the low-frequency range and lay the foundation for aircraft-based high-altitude applications of THz communication and radar.     

高效高稳定高光束质量声光调Q绿光激光器的研究

通过优化双棒串接直腔结构设计,利用大功率LD侧面抽运、声光Q开关、Ⅱ类相位匹配S-KTP内腔倍频获得高效大功率绿色激光输出.当抽运电流为45 A、重复频率为15 kHz时,激光平均功率为132 W,光—光转换效率为132％,脉宽约为120 ns.在输出130 W时,测得1 h功率不稳定度小于05%,光束质量因子M²为67.对高功率抽运情况下激光介质的热透镜效应以及谐振腔稳定运转工作区域也进行了理论分析和实验研究. 关键词： 绿光激光器 腔内倍频 声光调Q LD侧面抽运     

Low Threshold and High Conversion Efficiency Nanosecond Mid-Infrared KTA OPO

Based on a Type II non-critically phase-matched KTA crystal, a low-threshold and high conversion efficiency mid-infrared optical parametric oscillator （OPO） pumped by a diode-end-pumped Nd：YVO4 laser is demonstrated. The OPO threshold is only 0.825W. The maximum output power of 435mW at 3.47μm is achieved with the repetition rate of 30kHz, corresponding to an optical-to-optical conversion efficiency of 4.4%. The photon conversion efficiency is as high as about 64%. The pulse width is 3.5ns with a peak power of 4kW for the maximum output power.     

Intersubband absorption with difference-frequency generation in GaAs asymmetric quantum wells

An asymmetric quantum well(AQW) is designed to emit terahertz(THz) waves by using difference frequency generation(DFG) with the structure of GaAs/Al 0.2 Ga 0.8 As/Al 0.5 Ga 0.5 As.The characteristics of absorption coefficients are analysed under the parabolic and non-parabolic energy-band conditions in detail.We find that the absorption coefficients vary with the two pump optical intensities,and they reach the maxima when the pump wavelengths are given as λ p1 = 9.70 μm and λ p2 = 10.64 μm,respectively.Compared with non-parabolic conditions,the total absorption coefficient under parabolic conditions shows a blue shift,which is due to the increase in the energy difference between the ground and excited states.By adjusting the two pump optical intensities,the wave vector phase-matching condition inside the AQW is satisfied.     

太赫兹波在飞行器等离子体鞘套中的传输特性

针对临近空间飞行器的黑障问题,根据模拟的RAM C-Ⅲ飞行器周围的流场分布结果,计算了等离子体电子密度和碰撞频率,并根据其分布建立了非均匀的等离子体模型。在此基础上,利用散射矩阵方法分析了太赫兹波在等离子体中的传输特性随着等离子体密度、等离子体厚度、等离子体碰撞频率的变化以及外加磁场对传输特性的影响。结果表明,太赫兹波的传输损耗随着等离子体电子密度和等离子体厚度的增加而增加,而碰撞频率的增加会使得透射率先减小后增加。在外加磁场的作用下,左旋太赫兹波的传输特性会得到改善;而对于右旋太赫兹波,磁场的施加会引入吸收峰,并且随着磁感应强度的增加向高频方向移动。     

芳香寡聚酰胺类化合物的合成

邻甲氧基苯胺交替地与2,4-二羟基-5-硝基苯甲酰氯的二聚乙二氧基(Tg)醚或二甲基醚缩合,合成了5个"月牙型"寡聚酰胺化合物,其结构经1H NMR, 13C NMR和HR-MS(ESI)表征.     

高双折射的混合格子太赫兹光子晶体光纤的设计与研究

提出了一种新型高双折射的混合格子太赫兹光子晶体光纤,通过对芯区亚波长尺寸的空气孔进行多种格子组合排列,增加结构的非对称性实现高的模式双折射. 全文仿真建模采用专业的有限元计算软件COMSOL Multiphysics 4.0,结果表明:混合格子太赫兹光子晶体光纤在很宽的频率范围内都具有较高的双折射(达到10^-2)和低的限制损耗,且通过改变光纤的某些参数可以灵活地控制其双折射或限制损耗特性. 相比于同类光通信波段光纤,由于太赫兹波波长较大,能够降低芯区微结构加工的难度,具有可行性. 关键词： 双折射 混合格子 太赫兹光子晶体光纤 限制损耗     

Continuous-wave green laser of 34 W by intracavity frequency doubling in diode-side-pumped Nd:YAG/KTP

Continuous-wave green laser with a maximum power of 34 W has been obtained by intracavity frequency doubling with KTP in diode-side-pumped Nd：YAG. The Nd：YAG/KTP green laser has a simple three- mirror V-fold cavity structure. The optical-to-optical conversion efficiency is 9.5%. The instability of the laser is measured when the output powers are near 16, 21, 30, and 34 W after the beam is filtered. At the maximum output power, the M^2 factor is measured to be 8.     

基于三层光栅结构的超宽带太赫兹吸收体

基于等效介质膜理论及多层减反膜原理设计了用于超宽带太赫兹吸收体的三层微结构光栅,光栅基质采用重掺硼硅材料.用有限时域差分法分析了光栅周期、光栅宽度和深度对太赫兹吸收体反射系数的影响.数值分析结果表明,在低于3THz波段,吸收率高于98%的带宽为1.3THz,吸收率高于95%的带宽达2.1THz.用严格耦合波理论对该三层光栅的高吸收现象进行理论分析,分析结果表明,光栅多级衍射的相互作用减少了入射面的反射率,增大了该吸收体的吸收率.进一步优化三层光栅微结构的参量,在0.6~6THz范围内实现了大于95%的太赫兹吸收.基于光栅结构的吸收体结构简单,易于设计与分析,可以应用于太赫兹成像与探测应用领域.