排序方式: 共有42条查询结果,搜索用时 15 毫秒
11.
12.
13.
白冰 《应用数学和力学(英文版)》2006,27(11):1531-1539
An analytical method was derived for the thermal consolidation of layered, saturated porous half-space to variable thermal loading with time. In the coupled governing equations of linear thermoelastic media, the influences of thermo-osmosis effect and thermal filtration effect were introduced. Solutions in Laplace transform space were first obtained and then numerically inverted. The responses of a double-layered porous space subjected to exponential decaying thermal loading were studied. The influences of the differences between the properties of the two layers (e.g., the coefficient of thermal consolidation, elastic modulus) on thermal consolidation were discussed. The studies show that the coupling effects of displacement and stress fields on temperature field can be completely neglected, however, the thermo-osmosis effect has an obvious influence on thermal responses. 相似文献
14.
15.
16.
协同增敏荧光光谱法测定速灭威 总被引:1,自引:1,他引:0
速灭威(间甲苯-N-甲基氨基甲酸酯)是一种广泛使用的杀虫剂农药,速灭威在植物中存留时间虽短,但由于其触杀、熏蒸和内吸作用,在发生皮肤接触、吸入或食入时对人体有害.因此,如果在蔬菜、水果生产过程中施药后,在禁采期内采购上市,其残留的毒害作用仍然值得防备.目前,对于速灭威的测定主要应用气相色谱法[1,2],,高效液相色谱法[3,4],酶联免疫分析法[5]等,这些方法需对样品进行冗长的纯化处理,且操作人员必须经过专业培训.荧光分析法具有灵敏度高、选择性好、试样用量少、快速简便等优点,对痕量物质的检测具有显著优势.本文利用β-环糊精和聚乙烯醇对其增敏后的荧光信号,建立了速灭威的荧光测定方法,并用于蔬菜中残留速灭威的测定,完全满足国家标准对该农药残留的限制要求. 相似文献
17.
隧道下穿既有结构物引起的地表沉降控制标准研究 总被引:3,自引:0,他引:3
解决好隧道下穿既有结构物引起的地表沉降问题,对城市地下交通和高速铁路的建设具有重要的意义。在调研国内大量隧道下穿开挖引起的地表沉降控制标准和方法的基础上,根据隧道下穿公路、铁路、隧道和建筑物时引起的地表沉降的不同特点,结合隧道的施工、开挖面积、埋深和工程地质条件等因素,对隧道下穿不同的结构物提出不同的控制沉降措施和建议沉降标准。作者认为,目前的隧道下穿引起的地表最大沉降控制标准是不合理的,沉降控制标准应综合考虑既有结构物的特点、地质条件和施工特点等因素。 相似文献
18.
An all-fiber type Er~(3+)/Yb~(3+) co-doped fiber laser 总被引:4,自引:0,他引:4
In this paper, a distributed Bragg reflection (DBR) type Er~(3+)/Yb~(3+) co-doped fiber laser of high output power and high slope efficiency was developed. Its gain medium was a 4.45-m-long Er3+/Yb3+ co-doped fiber. When it was pumped by a 1064-nm Nd:YAG, the linewidth of output laser was measured as 0.072 nm by 3 dB and 0.192 nm by 25 dB at 1552.08 nm. The maximum output power was measured as 69 mW. Its power stability was < 5%, side mode suppression ratio was 59 dB, and the output wavelength stability was ±0.01 nm. The laser had a threshold of 12 mW and a slope efficiency of 22%. 相似文献
19.
研制了一种新型的用于WDM全光网的全光型上/下载复用器,由一对相同的光纤环行器、串接其间的可调谐光纤Bragg光源、WDM复用器和解复用器构成。其中光纤Bragg光栅是用紫外光直写方式在普通单模光纤上制成。讨论了该利用器的工作原理、结构设计、性能和特点。利用磁极间磁场力使光纤光栅产生显著的波长偏移。用可编程磁 极调控光栅的波第偏移。其信道波长调谐速度快,装置无需外加能源即可保持信道波长的偏移。给出了其性能测试结果。信道波长间隔0.8nm,上/下载信道插入损耗1.5dB,通过信道插入损耗2.0dB,上/下端口隔离度30dB,串扰小于-30dB,可调谐信道波长范围6.0nm。其特点是结构简单,可靠。可实现信道波长再利用,从而提高网络的灵活性。 相似文献
20.
采用了数值模拟与实验结合的方法研究了用于模拟放射性固体废物玻璃固化的非转移弧型等离子体炬的电、热特性。基于包括电弧室和开放空间在内的3D 模型得到了电弧等离子体和等离子体射流的温度场。根据计算结果,电弧室内的最高温度位于第一阳极内,达到41.77×10 K;弧电压的计算值高于实测值,二者之间的差异随着电流强度的增大而逐渐减小。采用该等离子体炬熔融模拟废物的实验发现,所确定的等离子体炬到炉底的距离能够满足废物熔融的要求,与计算的结果相符合。上述结果表明,数值模拟的结果可以作为等离子体炉工程设计的依据,并可以用作进一步分析等离子体炉炉膛内工艺过程的输入条件。 相似文献