Offset quantum-well method for tunable distributed Bragg reflector lasers and electro-absorption modulated distributed feedback lasers

Tunable distributed Bragg reflector (DBR) lasers are essential components for future optical fiber communi- cation systems[1]. A tunable laser can replace a large number of distributed feedback (DFB) lasers as sparing source in wavelength division multiplexing (WDM) sys- tems. Moreover they allow flexible switching and routing for distributed data in future network[2]. There are several methods for integrating gain sec- tion with DBR section, such as butt-joint method, bundle method, and …     

A double wavelength DFB laser with an identical active area for CWDM

A novel distribute feedback (DFB) laser which gave two different wavelengths under two distinct work conditions was fabricated. The laser consists of two Bragg gratings with different periods corresponding to wavelength spacing of 20 nm in an identical active area. When driving current was injected into one of the different sections separately, two different wavelengths at 1542.4 and 1562.5 nm were realized. The side mode suppression ratio (SMSR) of 45 dB or more both for the two Bragg wavelengths were achieved. The fabricating process of the laser was just the samp as that of traditional DFB laser diode. This device can be potentially used in coarse wavelength division multiplexer (CWDM) as a promising light source and the technology idea can be used to enlarge the transmission capacity in metro area network (MAN).     

1.82-μm distributed feedback lasers with InGaAs/InGaAsP multiple-quantum wells for a H2 O sensing system

High-strained InGaAs/InGaAsP multiple quantum wells （MQWs） distributed feedback （DFB） lasers, fabricated using metal organic chemical vapor deposition, are presented at 1.82 μm with a high side-mode-suppression ratio of 49.53 dB. The current- and temperature-tuning rates of the DFB mode wavelength are 0.01 nm/mA and 0.13 nm/℃, respectively. A characteristic temperature of 51 K is also confirmed. The DFB laser demonstrates good performance and can be applied to H₂ O concentration sensing.     

地质和岩土工程光纤传感监测技术综述

光纤传感器与常规传感器相比具有很大的优越性,已经成为地质和岩土工程监测领域中的研究热点。本文介绍了光纤传感监测系统的种类、基本测量原理和目前国内外的研究发展状况,并对各种传感技术的性能和特点进行了比较,指出了光纤传感监测技术应用于地质和岩土工程监测尚需研究的相关课题。     

超低压选择区域生长法制备产生10GHz重复率超短光脉冲的级联电吸收调制器与分布反馈激光器单片集成光源

采用超低压(22×１０^２Pa)选择区域生长(selective area growth, SAG)金属有机化学气相沉积(metal-organic chemical vapor deposition, MOCVD)技术成功制备了InGaAsP/InGaAsP 级联电吸收调制器(electroabsorption modulator, EAM)与分布反馈激光器(distributed feedback laser, DFB)单片集成光源的新型光电器件.实验结果表明，采用该技术制备的器件 关键词： 超低压 选择区域生长 集成光电子器件 超短光脉冲     

A 10-GHz Bandwidth Electroabsorption Modulated Laser by Ultra-Low-Pressure Selective Area Growth

A novel integration technique has been developed using band-gap energy control of InGaAsP/InGaAsP multiquantum-well (MQW) structures during simultaneous ultra-low-pressure (22 mbar) selective-area-growth (SAG) process in metal-organic chemical vapour deposition. A fundamental study of the controllability of band gap energy by the SAG method is performed. A large band-gap photoluminescence wavelength shift of 83nm is obtained with a small mask width variation (0-30μm). The method is then applied to fabricate an MQW distributed-feedback laser monolithically integrated with an electroabsorption modulator. The experimental results exhibit superior device characteristics with low threshold of 19mA, over 24 dB extinction ratio when coupled into a single mode fibre. More than 10 GHz modulation bandwidth is also achieved, which demonstrates that the ultra-low-pressure SAG technique is a promising approach for high-speed transmission photonic integrated circuits.     

InP基1×4多模干涉耦合器的设计与制作

在密集波分复用系统中,多波长DFB激光器阵列与多模干涉耦合器集成光源器件具有重要的应用前景.为了研制多波长集成光源中的宽带可用低损耗光耦合器,利用三维有限差分光束传播法仿真设计了一种具有强限制作用的InP/InGaAsP材料的多模干涉型耦合器.输入/输出端波导均采用楔形结构以降低多模干涉型耦合器的插入损耗,提高各个输出端口的出光平衡度.根据仿真结果,结合波导芯层为采用外延生长设备,采用反应离子刻蚀工艺制作了1×乘4多模干涉型耦合器.利用自动对准波导耦合测试系统对所制作器件的插入损耗和出光平衡度进行测量.测试结果表明,该器件在1 550 nm波长附近的40 nm带宽范围内获得了约2.6 dB的通带平坦度,在1 550 nm通信波长处,器件的插入损耗低于10 dB.     

用于10Gb/s传输系统的电吸收调制器与分布反馈激光器集成光源

采用超低压(22×１０^２Pa)选择区域生长(selective area growth, SAG)金属有机化学气相沉积(metal-organic chemical vapor deposition, MOCVD)技术成功制备了应变型InGaAsP/InGaAsP电吸收调制器(electroabsorption modulator, EAM)与分布反馈激光器(distribute feedback laser, DFB)单片集成光源的新型光电器件.实验结果表明，采用该技术制备的集成器件表现出了良好的性能：激射阈值为19 mA，出光功率接近7 mW，边模抑制比(side-mode suppression ratio, SMSR)大于40 dB，将该集成器件出射光耦合进普通单模光纤后进行测量，获得了16 dB的消光比，器件3 dB响应带宽达到了10 GHz以上.将该集成器件完全封装后成功进行了10 Gb/s非归零码(non-return zero, NRZ)的传输实验：在误码率为10^-10的传输条件下于普通单模光纤中传输了53.3 km，色散代价小于1.5 dB，动态消光比大于8 dB，且眼图清晰张开. 关键词： 超低压 选择区域生长 集成光电子器件 10 Gb/s     

Ⅲ–Ⅴ/Si Hybrid Laser Array with DBR on Si Waveguide

We report an eight-channel silicon evanescent laser array operating at continuous wave under room temperature conditions using the selective-area metal bonding technique.The laser array is realized by evanescentl.y coupling the optical gain of InGaAsP multi-quantum wells to the silicon waveguides of varying widths and patterned with distributed Bragg reflector gratings.The lasers have emission peak wavelengths in a range of 1537-1543 nm with a wavelength spacing of about 1.0 nm.The thermal impedances Z_T of these hybrid lasers are evidently lower than those DFB counterparts