煤中痕量元素在循环流化床锅炉中的迁移行为与富集特性

对天津市某电厂循环流化床(CFB)锅炉燃用的原煤及燃烧产物底灰、飞灰、细飞灰(≤50 μm)进行痕量元素含量的测定,分析了Be、Zn、Hg、V、Cr、Mn、Co、Ni、Cu、As、Se、Cd、Pb 13种痕量元素在燃烧过程中的迁移行为,揭示了痕量元素在CFB锅炉中的分配、富集特性。结果表明,CFB锅炉中,较低的炉温对于痕量元素的迁移富集产生了较大的影响。由相对富集系数得知,Be、V、Co、Se在底灰中耗散,在飞灰中富集,Zn、Mn倾向于在底灰中富集,元素Cd、Pb、Ni、Cu挥发性较强,在底灰和飞灰中均是耗散。As受钙氧化物影响,挥发性表现并不明显。Hg在底灰和飞灰中相对富集系数均很低,表明Hg在整个燃烧过程中以气态形式排放;Hg、As、Se、V、Cr、Mn、Co、Ni、Cu、Zn、Pb均有向小颗粒物中富集的趋势。根据相对富集系数以及研究的13种元素在低温CFB锅炉中的迁移行为,将这些元素分为三类:A类(E_R<0.1),主要是以气态形式排放元素Hg;B类(0.1R≤0.85),较易挥发元素As、Be、Ni、Cu、Se、Cd、Pb、Co、V;C类(E_R>0.85),主要残留在固体产物中元素Zn、Mn、Cr。     

循环流化床（CFB）煤／焦气化反应的研究：Ⅲ.同鼓泡流化床（BFB）气？…

为了更进一步了解ＣＦＢ气化能力和碳利用率。本文报道了两种煤－焦以及二氧化碳及氧气混合物为气化介质，在小型鼓泡流化床上进行气化反应的研究，并与相同气化条件下的循环流化床气化数据进行了比较。     

循环流化床（CFB）煤／焦气化反应的研究：Ⅱ.温度,氧含量及煤种对C …

报道了两种煤／焦，在小型循环流化床气化反应装置上，以二氧化碳及氧气混合物为气化介质，在不同条件下的气化反应的研究。结果表明，提高气化温度，气化反应速度提高，尾气中可燃气体浓度（ＣＯ，Ｈ２，ＣＨ４），碳率及气化效率明显提高。     

超临界水流化床内煤气化过程建模与仿真(2):气化反应动力学模型及气化规律

本文成功建立了煤超临界水气化动力学模型,其中包括煤在超临界水中热解、液化、固相残碳及液化产物的蒸汽重整等均相和非相反应。该动力学模型能准确反应煤在超临界水中气化特征。在前述第一部分工作的基础上,耦合该气化动力学模型,对煤在超临界水流化床中气化过程进行了建模。通过该模型研究了宽温度参数范围下反应器内典型反应速率、反应组分分布演变规律,揭示了反应器内部化学反应特征与气化规律。研究加深了对超临界水流化床内煤气化过程的认识,对超临界水流化床反应器的优化、放大以及实际运行具有指导意义。     

循环流化床(CFB)煤/焦气化反应的研究Ⅲ.同鼓泡流化床(BFB)气化反应的对比

为了更进一步了解ＣＦＢ气化能力和碳利用率，本文报道了两种煤焦（西山焦煤飞灰，神木煤）以二氧化碳及氧气混合物为气化介质，在小型鼓泡流化床上进行气化反应的研究，并与相同气化条件下的循环流化床气化数据进行了比较。研究结果表明：在相同直径气化反应装置上，相同的气化条件下，循环流化床（ＣＦＢ）的气化碳转化率、气化强度远远高于鼓泡流化床（ＢＦＢ）的气化结果，但ＢＦＢ的煤气中可燃气组成高于ＣＦＢ的。ＣＦＢ气化反应装置更适合于生产中、低热值煤气。     

Complementarity of CFD, experimentation and reactor models for solving challenging fluidization problems

Experimentalists, numerical modellers and reactor modellers need to work together, not only just for validation of numerical codes, but also to shed fundamental light on each other＇s problems and underlying assumptions. Several examples are given, Experimental gas axial dispersion data provide a means of choosing the most appropriate boundary condition （no slip, partial slip or full slip） for particles at the wall of fluidized beds. CFD simulations help to identify how close ＂two-dimensional＂ experimental columns are to being truly two-dimensional and to representing three-dimensional columns. CFD also can be used to provide a more rational means of establishing assumptions needed in the modelling of two-phase fluidized bed reactors, for example how to deal with cases where there is a change in molar flow （and hence volumetric flow） as a result of chemical reactions.     

Circulating turbulent fluidization—A new fluidization regime or just a transitional phenomenon

While circulating fluidized bed （CFB） reactor has many advantages over the more conventional turbulent fluidized bed （TFB） reactor, it does at least have one significant shortcoming-the rather dilute solids volume concentration in CFB reactor gives rise to less ideal reaction intensity. On the other hand, while having higher reaction intensity, TFB reactor has one fatal drawback of particle back-mixing, making it not suitable for certain reactions such as catalytic reaction where the catalyst requires frequent regeneration. This paper describes some key issues in the development of a circulating turbulent fluidized bed （CTFB） reactor that combines the advantages of both TFB and CFB, that is, to have the high reaction intensity as in TFB but and also to have a suppressed solids back-mixing as in CFB due to a continuous net upflow of solids flux through the bed. Experimental results show enough evidence to suggest that a new fluidization regime is formed, the characteristics of which appears to be distinct from those observed in a regular TFB and from those in either the bottom or the upper sections of regular CFB and/or high-density CFB （HDCFB）. Fundamentally, the difference is that particle-particle interaction （collision） dominates the motion of particles in CTFB and TFB, while gas-particle interaction （drag force） is the key element that determines the two phase flow in CFB including HDCFB.     

鼓泡流化床中流动特性的多尺度数值模拟

鼓泡流化床因其较高的传热特性以及较好的相间接触已经被广泛应用于工业生产中,而对鼓泡流态化气固流动特性的充分认知是鼓泡流化床设计的关键.在鼓泡流化床中,气泡相和乳化相的同时存在使得床中呈现非均匀流动结构,而这种非均匀结构给鼓泡流化床的数值模拟造成了很大的误差.基于此,以气泡作为介尺度结构,建立了多尺度曳力消耗能量最小的稳定性条件,构建了适用于鼓泡流化床的多尺度气固相间曳力模型.结合双流体模型,对A类和B类颗粒的鼓泡流化床中气固流动特性进行了模拟研究,分析了气泡速度、气泡直径等参数的变化规律.研究表明,与传统的曳力模型相比,考虑气泡影响的多尺度气固相间曳力模型给出的曳力系数与颗粒浓度的关系是一条分布带,建立了控制体内曳力系数与局部结构参数之间的关系.通过模拟得到的颗粒浓度和速度与实验的比较可以发现,考虑气泡影响的多尺度曳力模型可以更好地再现实验结果.通过A类和B类颗粒的鼓泡床模拟研究发现,A类颗粒的鼓泡床模拟受多尺度曳力模型的影响更为显著.      

Hydrodynamic behavior of an internally circulating fluidized bed with tubular gas distributors

To better understand the hydrodynamic behavior of an internally circulating fluidized bed, solids holdup in the down-comer （Eso）, solids circulation rate （Gs） and gas bypassing fraction （from down-comer to riser y~R, and from riser to down-comer yRD） were experimentally studied. The effects of gas velocities in the riser and in the down-comer （UR and UD）, orifice diameter in the draft tube （dor）, and draft tube height （HR） were investigated. Experimental results showed that increase of gas velocities led to increase in Gs and yDR, and slight decrease in yeD. Larger orifice diameter on the draft tube led to higher 8sD, Gs and yDR, but had insignificant influence on YRD. with increasing draft tube height, both Gs and YDR first increased and then decreased, while yRD first decreased and then increased. Proposed correlations for predicting the hydrodynamic parameters agreed reasonably well with experimental values.