排序方式: 共有23条查询结果,搜索用时 15 毫秒
11.
12.
13.
14.
15.
16.
常规恒流充电电源输入端的功率随着输出电压的升高而逐渐增加,充电结束时输入端的功率由最大值迅速降为0,不仅需要电网能够提供近2倍于平均值的峰值功率,还会造成电网电压的波动,特别是在重复频率与工频接近的大功率应用场合时,可能造成电网滤波系统的振荡,影响供电可靠性和干扰其他用电设备。提出了一种带有储能环节的电路拓扑,使得在对负载恒流充电期间,输入端的功率保持在平均功率水平。充分利用了串联谐振电路断续工作模式的特点,无需辅助变换器,仅通过双向开关对电流的控制,可将充电初期多余能量存储到储能环节,并在充电后期逐渐将此能量向负载释放,在充电启停时刻储能环节的净增能量为0。将上述拓扑电路添加到基于DC-link的恒流充电电源中,进行了分析和控制参数推导,并在输出电流8 A、最高输出电压5 kV的电源上进行了实验,结果表明:充电期间直流母线提供的电流基本稳定,幅值为常规方案中最大母线电流的一半左右。 相似文献
17.
利用场论的方法推导了6腔扇形腔结构相对论磁控管的色散关系,并用牛顿迭代法对色散关系进行了求解,得到了色散关系曲线.利用三维PIC粒子模拟,对该结构的相对论磁控管分别进行了冷腔和热腔研究,冷腔研究得到了7π模谐振频率为2.42GHz,与本文理论推导的色散关系有很好的一致性.在热腔情况下,电子能量为437keV,电子束流为12.2kA,外加磁场为0.6T,模拟得到了频率为4.5GHz,平均峰值功率为0.96Gw的C波段的高功率微波输出,分别通过相空间图和不同腔内射频场随时间的变化曲线可以确定器件工作在2π模,效率约为18%,且频谱纯净.当进一步对参数进行优化后,在注入的电子能量和电子束流分别为1.05MeV和20.7kA,外加磁场为0.7T时,得到平均功率达到约4.4GW,频率为4.37GHz微波输出,效率约为20%. 相似文献
18.
朱星平 李曙光 杜颖 韩颖 张闻起 阮银兰 Heike Ebendorff-Heidepriem Shahraam Afshar Tanya M. Monro 《中国物理 B》2013,22(1):14215-014215
We report supercontinuum (SC) generation in a lead silicate SF57 photonic crystal fiber by using a 1550 nm pump source. The effective nonlinear coefficient of the SF57 fiber is simulated to be 111.5 W-1 ·km-1 at 1550 nm. The fiber also shows ultraflat dispersion from 1700 nm to 2100 nm. Our results reveal that with an increase of the average power of the incident pulse from 10 mW to 90 mW, the SC of the SF57 photonic crystal fiber is generated from 1300 nm to 1900 nm with high stability and without significant change in spectral broadening. 相似文献
19.
WiFi电磁波的穿墙能力直接影响通信的效果和质量.结合砖墙的电磁特征,理论分析了WiFi电磁波在砖墙中的传播特性,推导出了WiFi电磁波穿墙厚度与平均功率流密度的关系式,给出能量传输实例及图像.结果表明:WiFi电磁波能穿透砖墙,穿透过程中信号能量逐渐衰减,但是衰减较小.因此,砖墙对WiFi通信连接的阻碍作用并不大. 相似文献
20.
Period Continuous Tuning of an Efficient Mid-Infrared Optical Parametric Oscillator Based on a Fan-out Periodically Poled MgO-Doped Lithium Niobate 下载免费PDF全文
We report a period continuously tunable, efficient, mid-infrared optical parametric oscillator (OPO) based on a fan-out periodically poled MgO-doped congruent lithium niobate (PPMgLN). The OPO is pumped by a Nd:YAG laser and a maximum idler output average power of 1.65W at 3.93μm is obtained with a pump average power of 10.5W, corresponding to the conversion efficiency of about 16% from the pump to the idler. The output spectral properties of the OPO with the fan-out crystal are analyzed. The OPO is continuously tuned over 3.78-4.58μm (idler) when fan-out periods are changed from 27.0 to 29.4μm. Compared with temperature tuning, fan-out period continuous tuning has faster tuning rate and wider tuning range. 相似文献