带有给定凸切线多边形的保形五次样条逼近

本讨论带有给定切线多边形的保形逼近问题．给出了一条与给定切线多边形相切的保形五次参数祥条曲线。     

在几何和参数上表示同一条曲线的两条有理NURBS曲线的权与控制顶点之间的关系

The paper discusses the relationship between weights and control vertices of two rational NURBS curves of degree two or three with all weights larger than zero when they represent the same curve parametrically and geometrically, and gives sufficient and necessary conditions for coincidence of two rational NURBS curves in non-degeneracy case.     

增长曲线模型参数估计的加权相对效率

对增长曲线模型中参数估计的相对效率，本文提出了一种新的定义－加权相对效率，并研究了它的性质，以及在文献「４」中的两种相对效率的关系。     

双纽线｜W^2＋c｜=1的弧长

设ｓ（ｃ）为双纽线｜Ｗ＾２＋Ｃ｜＝１的弧长，ｃ∈「０，＋∞），该文讨论了ｓ（ｃ）的性质，并在ｎ＝２的情况下解决了Ｅｒｄｏｓ，Ｈｅｒｚｏｇｔ Ｐｉｒａｎｉａｎ提出的一个猜测。     

THE RELATIONSHIP BETWEEN PROJECTIVE GEOMETRIC AND RATIONAL QUADRATIC B-SPLINE CURVES

For two rational quadratic B-spline curves with same control vertexes, the cross ratio of four eollinear points are represented; which are any one of the vertexes, and the two points that the ray initialing from the vertex intersects with the corresponding segments of the twocurves, and the point the ray intersecting with the connecting line between the two neighboring vertexes. Different from rational quadratic Beeier curves, the value is generally related with the loeation of the ray, and the necessary and sufficient condition o5 the ratio being independent of the ray‘s loeation is showed. Alsn another cross ratio o5 the following four collinear points are suggested, i.e. one vertex, the points that the ray from the initlal vertex intersects respectivdy with the curve segmentt the line connecting the segments end points, and the line connecting the two neighboring vertexes. This cross ratio is concerned only whh the ray‘s location, butnot with the weights of the curve. Furthermore, the cross ratio is projective invariant under the projective transformation between the two segments.     

HPLC-MS/MS技术在中华绒螯蟹硝基呋喃类代谢物残留量检测中的应用

建立了中华绒螯蟹中硝基呋喃类代谢物残留量的液相色谱-串联质谱检测方法.取均质后的中华绒螯蟹可食部分样品,用盐酸水解组织中蛋白结合代谢物,经2-硝基苯甲醛37℃过夜衍生化,调节pH值至约7.0～7.4后,用乙酸乙酯提取,正己烷净化.选用电喷雾离子源,在正离子、多反应监测方式模式下进行定性,以同位素内标法进行定量.方法的检出限为0.5 μg·kg-1,工作曲线的线性范围为1.25～50.0 μg·L-1.在添加浓度为0.5～10.0 μg·kg-1的范围内,AMOZ、SEM、AHD和AOZ的回收率分别在92.8%～106%、84.5%～94.6%、80.6%～98.6%和88.4%～105%之间,相对标准偏差均小于10%.     

增长曲线模型中回归系数的广义根方估计

本文对增长曲线模型中的回归系数B提出了一种新的估计形式－广义根方估计的B（K），其中K＝diag(k1,k2,…，kp）并证明了通过广义根方偏参数ki(i=1,2,…，p）的适当选取可使得该估计在均方误差矩阵的意义下优于已有的LS估计和根方估计，及广义根方估计是可容许估计，本文还给出了选取广义根方偏参数的两种方法，算法及一个应用实例。     

Release Behaviour of Shock Loaded LY12 Aluminium Alloy

By making use of a light gas gun, a specially designed target is impacted by the LY12 flyer, and the pressure is taken in the range of 0.6-3 GPa. Based on the stress profiles measured in the buffer materials by manganese gauges, the Hugoniot curve and release curves of LY12 aluminium alloy are obtained. Meanwhile, the release curves from different initial shocked states are described in both the pressure-particle velocity plane and the pressure-specific volume plane.     

基于分形维数的液体爆炸分散中界面破碎形态研究

通过对爆炸抛撒图象的处理,得到液体界面的曲线.采用盒维数的计算方式,计算界面曲线的分形维数.通过对各时刻液体界面分形维数的变化研究,分析爆炸抛撒近场阶段的变化过程,同时观察到蘑菇状尖顶的出现与破碎,以及空化区域的形成和消失现象。     

PLD法生长n-Zn1-xCoxO/p-Si异质结的电学性能研究

用高功率脉冲激光轰击Zn1-xCoxO,得到锌、钴和氧的原子、分子和团簇等混合体,并在p型单晶Si表面反应生成n型Zn1-xCoxO.X射线衍射(XRD)、原子力显微镜(AFM)研究表明,这层材料是结构致密均匀、呈c轴高度择优取向的薄膜,与p型Si材料形成n-Zn1-xCoxO/p-Si异质结.在Zn1-xCoxO中加入H,生成了Co-H-Co聚合体,异质结的势垒高度随着Co含量的增加而增加,同时深能级的Co-d轨道捕获作为浅施主的间隙H提供的电子,造成的体系n型半导体层的载流子浓度降低,电阻率提高,使得n-Zn1-xCoxO/p-Si异质结在6.5V时漏电流降致6×10-3 mA,反向击穿电压超过20V,电学性能得到显著改进.