Electric field‐induced birefringence,optical rotatory power and conoscopic measurements of a chiral antiferroelectric smectic liquid crystal

Using a photoelastic modulator‐based novel set‐up, the electric field‐induced in‐plane birefringence and the optical rotatory power (ORP) were measured of an antiferroelectric liquid crystalline compound (12OF1M7) in its various phases using 30 µm homeotropic cells. Some specific signatures of the in‐plane birefringence and of the ORP for the various phases are being established. A relatively small threshold field is needed for the unwinding process of the antiferroelectric phase with a unit cell of four layers [SmC_A*(1/2)] compared with that for two layers [SmC_A*(0)]. On application of the electric field on the high temperature side of the SmC_A*(1/2) phase (80.1–81.5°C), a field‐induced phase transition is shown to occur directly to the SmC* phase, whereas on the lower temperature side (79.4–80.1°C) the transition takes place to SmC* via the SmC_A*(1/3) phase. The in‐plane birefringence exhibits a critical power law dependence for the SmC*–SmA transition. The ORP changes sign within the temperature range of the phase with a unit cell of three layers, reflecting a change in the handedness during this phase. Using tilted conoscopy, the results for the biaxiality and the apparent tilt angle for a smectic liquid crystal with a tilt angle greater than 18° in the ferroelectric phase are reported. The biaxiality implies the difference in the refractive indices between the two minor axes of the refractive index ellipsoid. The optical transmittance at visible and IR wavelengths for free‐standing films reveal characteristic reflection bands for these phases. The modulated structures of the reflected bands appear just above the SmC_A* phase and below SmC_A*(1/3); these are possibly due to an easy deformation of the phase by the surfaces.     

Birefringence control by hydrogen bonding on compatible polymer pair composed of hydrogenated ring‐opening polymer and modified polystyrene

A new polymer blend composed of a hydrogenated ring‐opening polymer (HROP) with an ester group and hydroxyl functionalized polystyrene (HFP) produced the excellent transparent materials which enabled a precise birefringence control in keeping with the other physical properties for optical film use. The blend with a composition from 0.28 to 0.35 for the HFP weight fraction showed an extraordinary wavelength dispersion, transmitting through a zero birefringence point at the critical fraction of 0.45, while each polymer showed an ordinary wavelength dispersion. The observed excellent transparency even above those of the glass transition temperature was attributed to a depressed phase separation that resulted from strong hydrogen bond between the ester and hydroxyl groups. An IR analysis of the film demonstrated a remarkable red‐shift in the carbonyl peak with an increase of the hydroxylated polystyrene content, indicating a strong hydrogen bond between those groups. This new polymer blend provides a useful design to achieve practical demands for film use, both optical and mechanical under the fabrication conditions using the melt extrusion technique. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3132–3143     

Details of Structure Formation During the Induction Period of Spinodal-Type Polymer Crystallization

An unexpected type of primary crystal nucleation is described, involving spinodal decomposition (SD) type microphase separation due to the orientation fluctuations of rigid segments prior to crystal nucleation. This type of mechanism was found by the present authors about 10 years ago, and recently, it was theoretically revealed by Olmsted et al. to be one of three types of primary crystal nucleation: the well-known homogeneous crystal nucleation directly from the liquid–crystal coexistence domain, which occurs at higher temperatures above the binodal temperature T _b , crystal nucleation after binodal microphase separation between T _b and spinodal temperature T _s , and that after SD below T _s . The detailed experimental results for the spinodal-type crystal nucleation, especially the temperature dependence of characteristic wavelength in SD, are explained as well.     

Breakdown Pattern of Hydrocarbons by Laser Breakdown Time-of-flight Mass Spectrometry

The laser breakdown time-of-flight mass spectrometry was developed and applied to detect the breakdown patterns of hydrocarbons that are significant to improve the detectability of heavy metals compounded in various mixtures such as particles and hydrocarbons. The laser wavelength dependence of this method was evaluated using 1064, 532, and 266 nm laser outputs. Breakdown processes using 1064 and 532 nm outputs showed less interference of fragmentation for the detection of various heavy metals. The method was applied to various hydrocarbons and it showed the possibility of categorization of hydrocarbon groups using the pattern of breakdown products.     

Combined Path and Maximum Empty Static Routing Algorithms with Wavelength Assignment for Future Transport Networks

Abstract

In this article, two static routing algorithms have been proposed and compared to some of the existing algorithms on the basis of blocking probability. The two proposed static routing and wavelength assignment algorithms reduce the blocking probability to maximize the utilization of the network. All of these algorithms are analyzed and compared with four wavelength assignment schemes, which are first-fit, random, most used, and least used. It is shown that our proposed static algorithms give the best performance for first-fit wavelength assignment and most used wavelength assignment strategies with reduced complexity. For least used wavelength assignment and random wavelength assignment, 1 fixed and 2 alternate routing algorithm gives the lowest blocking probability.     

Active wavelength selection for mixture identification with tunable mid-infrared detectors

This article presents a wavelength selection framework for mixture identification problems. In contrast with multivariate calibration, where the mixture constituents are known and the goal is to estimate their concentration, in mixture identification the goal is to determine which of a large number of chemicals is present. Due to the combinatorial nature of this problem, traditional wavelength selection algorithms are unsuitable because the optimal set of wavelengths is mixture dependent. To address this issue, our framework interleaves wavelength selection with the sensing process, such that each subsequent wavelength is determined on-the-fly based on previous measurements. To avoid early convergence, our approach starts with an exploratory criterion that samples the spectrum broadly, then switches to an exploitative criterion that selects increasingly more relevant wavelengths as the solution approaches the true constituents of the mixture. We compare this “active” wavelength selection algorithm against a state-of-the-art passive algorithm (successive projection algorithm), both experimentally using a tunable spectrometer and in simulation using a large spectral library of chemicals. Our results show that our active method can converge to the true solution more frequently and with fewer measurements than the passive algorithm. The active method also leads to more compact solutions with fewer false positives.     

基于波长调制-直接吸收光谱方法的CO分子1567 nm处谱线参数高精度标定

直接吸收光谱(DAS)可直接测量分子吸收率函数,并通过拟合吸收率函数确定待测气体参数.波长调制-直接吸收光谱(WM-DAS)在DAS基础上,结合了波长调制光谱(WMS)中谐波分析思想,利用傅里叶变换复现吸收率函数,可有效提高吸收率函数的测量精度.本文利用WM-DAS方法结合长光程气体吸收池,在室温低压条件下,对CO分子1567 nm处R5-R11近红外弱吸收谱线吸收率函数进行了精确复现,其拟合残差标准差低至3×10^-5,随后根据测得的吸收率函数对谱线的碰撞展宽、Dicke收敛以及速度依赖的碰撞展宽系数等光谱参数进行了高精度标定,并将其与高灵敏度的连续波腔衰荡光谱(CW-CRDS)测量结果进行了比较,实验结果表明该方法与CW-CRDS测量结果具有高度一致性,更具有系统简单、测量速度快、对环境要求低等优点.     

Monolithically integrated 64‐channel silicon hybrid demultiplexer enabling simultaneous wavelength‐ and mode‐division‐multiplexing

A compact 64‐channel hybrid demultiplexer based on silicon‐on‐insulator nanowires is proposed and demonstrated experimentally to enable wavelength‐division‐multiplexing and mode‐division‐multiplexing simultaneously in order to realize an ultra‐large capacity on‐chip optical‐interconnect link. The present hybrid demultiplexer consists of a 4‐channel mode multiplexer constructed with cascaded asymmetrical directional‐couplers and two bi‐directional 17 × 17 arrayed‐waveguide gratings (AWGs) with 16 channels. Here each bi‐directional AWG is equivalent as two identical 1 × 16 AWGs. The measured excess loss and the crosstalk for the monolithically integrated 64‐channel hybrid demultiplexer are about ‐5 dB and ‐14 dB, respectively. Better performance can be achieved by minimizing the imperfections (particularly in AWGs) during the fabrication processes.

     

A Complete Solution to Spectrum Problem for Five‐Vertex Graphs with Application to Traffic Grooming in Optical Networks

A G‐design of order n is a decomposition of the complete graph on n vertices into edge‐disjoint subgraphs isomorphic to G. Grooming uniform all‐to‐all traffic in optical ring networks with grooming ratio C requires the determination of graph decompositions of the complete graph on n vertices into subgraphs each having at most C edges. The drop cost of such a grooming is the total number of vertices of nonzero degree in these subgraphs, and the grooming is optimal when the drop cost is minimum. The existence spectrum problem of G‐designs for five‐vertex graphs is a long standing problem posed by Bermond, Huang, Rosa and Sotteau in 1980, which is closely related to traffic groomings in optical networks. Although considerable progress has been made over the past 30 years, the existence problems for such G‐designs and their related traffic groomings in optical networks are far from complete. In this paper, we first give a complete solution to this spectrum problem for five‐vertex graphs by eliminating all the undetermined possible exceptions. Then, we determine almost completely the minimum drop cost of 8‐groomings for all orders n by reducing the 37 possible exceptions to 8. Finally, we show the minimum possible drop cost of 9‐groomings for all orders n is realizable with 14 exceptions and 12 possible exceptions.     

Optimal Groomings with Grooming Ratios Six and Seven

Grooming uniform all‐to‐all traffic in optical (SONET) rings with grooming ratio C requires the determination of a decomposition of the complete graph into subgraphs each having at most C edges. The drop cost of such a grooming is the total number of vertices of nonzero degree in these subgraphs, and the grooming is optimal when the drop cost is minimum. The determination of optimal C‐groomings has been considered for , and completely solved for . For , it has been shown that the lower bound for the drop cost of an optimal C‐grooming can be attained for almost all orders with 5 exceptions and 308 possible exceptions. For , there are infinitely many unsettled orders; especially the case is far from complete. In this paper, we show that the lower bound for the drop cost of a 6‐grooming can be attained for almost all orders by reducing the 308 possible exceptions to 3, and that the lower bound for the drop cost of a 7‐grooming can be attained for almost all orders with seven exceptions and 16 possible exceptions. Moreover, for the unsettled orders, we give upper bounds for the minimum drop costs.