CT实验仪的研制及其在物理教学中的应用

介绍了我们研制的CT实验仪的原理及开发，使用情况，包括CT的物理，数学原理，CT装置的结构，性能、工作原理等，文末给出实验结果，并对装置在物理实验教学中的意义作了讨论。     

Polarization Sensitive Spectral Interferometric Optical Coherence Tomography for Biological Samples

A spectral interferometric optical coherence tomography (OCT) system which has polarization sensitivity is developed. This system reduces the mechanical scanning dimension by employing the principle of spectral interferometry, and measures a two dimensional cross-sectional image of biological tissue with one dimensional mechanical scanning. Sixteen OCT images with different polarization conditions are measured, and two dimensional distributions of each element of the Müller matrix of a sample to be measured are calculated.     

基于CT算法的束团横向相空间测量

精确测量束团的发射度和横向相空间, 在高亮度电子束的产生和应用中具有重要意义. 传统测量方法在测量发射度时需要对束团在相空间内分布进行初始假设, 且只能给出相椭圆的twiss参数;基于CT(computerized tomography)算法的束团横向相空间测量方法无需先验假设, 能给出粒子在相空间内的真实分布, 测量结果更为精确. 介绍了基于CT算法的束团横向相空间测量的原理和初步实验结果, 并与四极透镜扫描法测量的结果进行了比较.     

CT、MRI对良恶性甲状腺结节的鉴别价值

本文探讨了计算机断层扫描（CT）、磁共振成像（MRI）对良恶性甲状腺结节的鉴别价值。方法：选取2015年3月至2018年3月本院收治的甲状腺结节患者150例，依据病理结果分为恶性48例、良性102例，所有患者均给予CT、MRI检查，分析CT、MRI对良恶性甲状腺结节的鉴别价值。结果发现，MRI总病灶、形态不规则、边界不清/毛糙、信号/密度不均检出率明显高于CT，MRI钙化灶检出率明显低于CT，差异有统计学意义（P<0.05），CT、MRI淋巴结转移检出率比较，差异无统计学意义（P>0.05）；在鉴别良恶性甲状腺结节的敏感度、特异度、准确度中，CT为79.17%、74.51%、76.00%，MRI为83.33%、80.39%、81.33%，CT联合MRI为95.83%、96.08%、96.00%，CT联合MRI明显高于CT、MRI，差异有统计学意义（P<0.05）。说明CT、MRI可作为鉴别良恶性甲状腺结节的重要方法，CT对钙化灶有较高的分辨能力，MRI对软组织及小病灶有较高的分辨能力，CT联合MRI可有效提高其鉴别价值。     

The raised-cosine wavelets in computerized tomography

In Computerized Tomography (CT), an image must be recovered from its sampled projections in the form of values of the Radon transform. In this work a method of recovering the image is based on the properties of the raised-cosine wavelet. This wavelet has a closed form which allows for certain precomputations and avoids convolution. The rate of convergence of the resulting algorithm to the image density function is found under suitable hypotheses. This algorithm is then tested on the standard Shepp–Logan     

Time‐resolved in situ tomography for the analysis of evolving metal‐foam granulates

An experimental setup has been developed that allows for capturing up to 25 tomograms s^?1 using the white X‐ray beam at the experimental station EDDI of BESSY II, Berlin, Germany. The key points are the use of a newly developed, precise and fast rotation stage, a very efficient scintillator and a fast CMOS camera. As a first application, the foaming of aluminium alloy granules at 923 K was investigated in situ. Formation and growth of bubbles in the liquid material were observed and found to be influenced by the limited thermal conductivity in the bulk granules. Changes that took place between two tomographic frames separated in time by 39 ms could be detected and analysed quantitatively.     

Internal inspection of semi-transparent objects by digital holographic micro-tomography

The combined use of digital holographic microscopy and computer tomography, here named digital holographic micro-tomography, is used to examine the interior of transparent channels. The proposed method is used to identify internal obstacles inside of transparent troughs having slightly different refractive index. The method is based in the acquisition of a set of digital holograms of the specimen whereas it is axially rotated from 0° to 180°. The phase differences retrieved from the obtained holograms are the inputs to a computerised axial tomography procedure. The technique has been numerically modelled in order to find the optimal tomographic conditions and also to realise the minimum difference of refractive index the method could detect. The obtained results show the feasibility of the proposed method for the non-destructive evaluation of transparent micro-objects.     

Multipod structures of lamellae‐forming diblock copolymers in three‐dimensional confinement spaces: Experimental observation and computer simulation

The three‐dimensional (3D) confinement effect on the microphase‐separated structure of a diblock copolymer was investigated both experimentally and computationally. Block copolymer nanoparticles were prepared by adding a poor solvent into a block copolymer solution and subsequently evaporating the good solvent. The 3D structures of the nanoparticles were quantitatively determined with transmission electron microtomography (TEMT). TEMT observations revealed that various complex structures, including tennis‐ball, mushroom‐like, and multipod structures, were formed in the 3D confinement. Detailed structural analysis, showed that one block of the diblock copolymer slightly prefers to segregate into the particle surface compared with the other block. The observed structures were further elaborated using cell dynamics computer simulation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1702–1709     

Tuning Tetrazole Photochemistry for Protein Ligation and Molecular Imaging

Photochemistry provides a wide range of alternative reagents that hold potential for use in bimolecular functionalisation of proteins. Here, we report the synthesis and characterisation of metal ion binding chelates derivatised with disubstituted tetrazoles for the photoradiochemical labelling of monoclonal antibodies (mAbs). The photophysical properties of tetrazoles featuring extended aromatic systems and auxochromic substituents to tune excitation toward longer wavelengths (365 and 395 nm) were studied. Two photoactivatable chelates based on desferrioxamine B (DFO) and the aza-macrocycle NODAGA were functionalised with a tetrazole and developed for protein labelling with ⁸⁹Zr, ⁶⁴Cu and ⁶⁸Ga radionuclides. DFO-tetrazole ( 1 ) was assessed by direct conjugation to formulated trastuzumab and subsequent radiolabelling with ⁸⁹Zr. Radiochemical studies and cellular-based binding assays demonstrated that the radiotracer remained stable in vitro retained high immunoreactivity. Positron emission tomography (PET) imaging and biodistribution studies were used to measure the tumour specific uptake and pharmacokinetic profile in mice bearing SK-OV-3 xenografts. Experiments demonstrate that tetrazole-based photochemistry is a viable approach for the light-induced synthesis of PET radiotracers.