Hitting probabilities and the Hausdorff dimension of the inverse images of a class of anisotropic random fields

Let X = {X(t):t ∈ R~N} be an anisotropic random field with values in R~d.Under certain conditions on X,we establish upper and lower bounds on the hitting probabilities of X in terms of respectively Hausdorff measure and Bessel-Riesz capacity.We also obtain the Hausdorff dimension of its inverse image,and the Hausdorff and packing dimensions of its level sets.These results are applicable to non-linear solutions of stochastic heat equations driven by a white in time and spatially homogeneous Gaussian noise and anisotropic Guassian random fields.     

基于非线性光纤环形镜的少模脉冲幅度调制再生器

随着网络带宽需求的快速增加,波分复用系统的容量已接近非线性香农极限.为了适应未来网络的发展,空分复用技术引起了越来越多的关注.本文首次提出基于少模非线性光纤环形镜(FM-NOLM)的脉冲幅度调制(PAM)全光再生器,描述了其工作原理和具体设计过程.采用COMSOL软件对组成FM-NOLM的硫化物高非线性光纤进行了模式特性仿真.以LP01,LP11,LP21三个光纤模式为例,确定了再生器的参数,计算出每个模式的功率转移函数曲线.仿真分析了该少模PAM-4全光再生器的噪声抑制(NRR)性能,并与单模情形进行了比较.研究表明,1)对于每个空间模式的PAM信号,所有再生电平具有一致的功率转移性能;2)当输入信噪比(SNR)约大于20 dB时,三种模式的噪声抑制比均可超过3 dB,并随着输入信噪比线性增加,其斜率约为1.2;3)在相同输入SNR条件下,三种模式的噪声抑制比相差不大,不超过1.1 dB.为了说明再生器的再生性能,当输入SNR为25 dB时,我们还给出了再生前后PAM-4信号的功率分布直方图.与现有的再生方案相比,本文方案的均匀多电平再生转移性能,使其更适合高频谱效率的长距空分复用系统和任意电平数的PAM信号再生.此外,该方案也能够扩展到波长域,有效提高光通信系统的传输容量.     

Full counting statistics of transport electrons through a two-level quantum dot with spin–orbit coupling

We study the full counting statistics of transport electrons through a semiconductor two-level quantum dot with Rashba spin–orbit (SO) coupling, which acts as a nonabelian gauge field and thus induces the electron transition between two levels along with the spin flip. By means of the quantum master equation approach, shot noise and skewness are obtained at finite temperature with two-body Coulomb interaction. We particularly demonstrate the crucial effect of SO coupling on the super-Poissonian fluctuation of transport electrons, in terms of which the SO coupling can be probed by the zero-frequency cumulants. While the charge currents are not sensitive to the SO coupling.     

Enhancing optomechanical force sensing via precooling and quantum noise cancellation

We theoretically investigate optomechanical force sensing via precooling and quantum noise cancellation in two coupled cavity optomechanical systems.We show that force sensing based on the reduction of noise can be used to dramatically enhance the force sensing and that the precooling process can eifectively improve the quantum noise cancellation.Specifically,we examine the effect of optomechanical cooling and noise reduction on the spectral density of the noise of the force measurement;these processes can significantly enhance the performance of optomechanical force sensing,and setting up the system in the resolved sideband regime can lead to an optimization of the cooling processes in a hybrid system.Such a scheme serves as a promising platform for quantum back-action-evading measurements of the motion and a framework for an optomechanical force sensor.     

Controlled quantum teleportation of an unknown single-qutrit state in noisy channels with memory

This paper proposes a three-dimensional(3 D) controlled quantum teleportation scheme for an unknown single-qutrit state. The scheme is first introduced in an ideal environment, and its detailed implementation is described via the transformation of the quantum system. Four types of 3 D-Pauli-like noise corresponding to Weyl operators are created by Kraus operators: trit-flip, t-phase-flip, trit-phase-flip, and t-depolarizing. Then, this scheme is analyzed in terms of four types of noisy channel with memory. For each type of noise, the average fidelity is calculated as a function of memory and noise parameters, which is afterwards compared with classical fidelity. The results demonstrate that for trit-flip and t-depolarizing noises, memory will increase the average fidelity regardless of the noise parameter. However, for t-phase-flip and trit-phaseflip noises, memory may become ineffective in increasing the average fidelity above a certain noise threshold.     

Noise Reduction in Spur Gear Systems

This article lists some tips for reducing gear case noise. With this aim, a static analysis was carried out in order to describe how stresses resulting from meshing gears affect the acoustic emissions. Different parameters were taken into account, such as the friction, material, and lubrication, in order to validate ideas from the literature and to make several comparisons. Furthermore, a coupled Eulerian–Lagrangian (CEL) analysis was performed, which was an innovative way of evaluating the sound pressure level of the aforementioned gears. Different parameters were considered again, such as the friction, lubrication, material, and rotational speed, in order to make different research comparisons. The analytical results agreed with those in the literature, both for the static analysis and CEL analysis—for example, it was shown that changing the material from steel to ductile iron improved the gear noise, while increasing the rotational speed or the friction increased the acoustic emissions. Regarding the CEL analysis, air was considered a perfect gas, but its viscosity or another state equation could have also been taken into account. Therefore, the above allowed us to state that research into these scientific fields will bring about reliable results.     

光与原子纠缠存储寿命与磁场噪声关系的实验研究

在冷原子系综中,利用自发拉曼散射过程产生光与原子纠缠,测量了恢复效率随存储时间的关系。实验结果显示在没有施加轴向磁场时的存储寿命仅仅只有40μs。而在施加轴向磁场的情况下,存储时间在50μs以后甚至在400μs时都可以测量到明显的恢复信号,存储寿命明显高于100μs,远高于未施加轴向磁场时的情况。对这个实验现象进行分析认为:原子所处的环境中存在磁场噪声的影响,当没有轴向磁场时,噪声会扰乱自旋波信号的相位;当有轴向磁场时,磁场噪声对自旋波相位的影响便被抑制了。     

风力机叶片气动噪声的影响参数*

随着风力机的大型化，风电机组对环境的影响不容忽视，必须对风力机气动噪声进行预测和控制。选取基于NACA、DU翼型的某风力机叶片作为研究基准，采用修正BPM半经验模型计算叶片的气动噪声特性，通过改变翼型族、弦长、机组运行状态、风切变指数、来流风向参数，研究叶片外形几何参数、机组运行工况对叶片气动噪声源的影响。计算结果从多个角度总结出水平轴风力机叶片气动噪声的变化规律，为开发高效低噪风电叶片提供参考。     

介观电路中量子纠缠的经典对应

从量子力学诞生日起,它的经典对应(或类比)一直是物理学家关心的话题.本文以介观电路量子化的框架中,带有互感的两个介观电容-电感(LC)电路为例,首次讨论了量子纠缠的经典类比(或对应)问题.先用有序算符内的积分理论证明其互感是产生量子纠缠的源头;再推导出求解特征频率的公式,就发现它与一个经典系统的小振动频率的表达式有相似之处,该经典系统组成如下:两个墙壁各连一个相同的弹簧,两个弹簧之间接着一个滑动小车可以在光滑的桌面上运动,小车挂有一根单摆.用分析力学求此系统的小振动频率,发现与上述介观电路的特征频率形式类似,单摆的摆动会造成小车来回振动,摆、小车和弹簧的互相牵制效应反映了小车和摆的"纠缠".