Noise Reduction in Spur Gear Systems

This article lists some tips for reducing gear case noise. With this aim, a static analysis was carried out in order to describe how stresses resulting from meshing gears affect the acoustic emissions. Different parameters were taken into account, such as the friction, material, and lubrication, in order to validate ideas from the literature and to make several comparisons. Furthermore, a coupled Eulerian–Lagrangian (CEL) analysis was performed, which was an innovative way of evaluating the sound pressure level of the aforementioned gears. Different parameters were considered again, such as the friction, lubrication, material, and rotational speed, in order to make different research comparisons. The analytical results agreed with those in the literature, both for the static analysis and CEL analysis—for example, it was shown that changing the material from steel to ductile iron improved the gear noise, while increasing the rotational speed or the friction increased the acoustic emissions. Regarding the CEL analysis, air was considered a perfect gas, but its viscosity or another state equation could have also been taken into account. Therefore, the above allowed us to state that research into these scientific fields will bring about reliable results.     

Similar Structural Dynamics for the Degradation of CH3NH3PbI3 in Air and in Vacuum

We investigate the degradation path of MAPbI₃ (MA=methylammonium) films over flat TiO₂ substrates at room temperature by means of X‐ray diffraction, spectroscopic ellipsometry, X‐ray photoelectron spectroscopy, and high‐resolution transmission electron microscopy. The degradation dynamics is found to be similar in air and under vacuum conditions, which leads to the conclusion that the occurrence of intrinsic thermodynamic mechanisms is not necessarily linked to humidity. The process has an early stage, which drives the starting tetragonal lattice in the direction of a cubic atomic arrangement. This early stage is followed by a phase change towards PbI₂. We describe how this degradation product is structurally coupled with the original MAPbI₃ lattice through the orientation of its constituent PbI₆ octahedra. Our results suggest a slight octahedral rearrangement after volatilization of HI+CH₃NH₂ or MAI, with a relatively low energy cost. Our experiments also clarify why reducing the interfaces and internal defects in the perovskite lattice enhances the stability of the material.     

Realizing the Promise—The Development of Research on Carbon Nanotubes

The present reflection on the development of research on carbon nanotubes (CNTs) stems from the publication of the report “Realizing the Promise of Carbon Nanotubes” by the US National Nanotechnology Initiative in 2015. The report is a critical assessment of the state‐of‐art of CNT research and highlights some unresolved issues related with this field. Starting from the results of this assessment, we carried out an analysis of the publications’ pool in CNTs and related domains, by exploiting bibliometric tools. We focused on the item of competition/collaboration between disciplines and nations, with the purpose of evaluating the position of chemistry (as a discipline) as well as the position of the main European countries and the European Union (EU) as a whole in the context of CNT research. The results of such analysis outline very clearly the interdisciplinary landscape wherein CNT research is situated and show the highly competitive place occupied by EU in the field.     

Auger electron emission in proton-induced interactions in living matter: A TILDA-V Monte Carlo tracking

The present work focuses on studying the contribution of the Auger electron emission in proton-induced interactions in biological matter. The Monte Carlo track-structure code, TILDA-V, was then used for modeling the protons beams of 10 keV to 100 MeV in biological matter, namely, water vapor and hydrated DNA. The main ionizing processes are described by means of an extensive set of ab initio differential and total cross sections computed within a quantum-mechanical CDW-EIS approximation.     

Cotype and absolutely summing linear operators

New applications of cotype to the theory of absolutely summing linear operators between Banach spaces are proved in this paper. Among other consequences we extend/complement some classical results of Bennett (Duke Math J 44:603?C639, 1977) on the existence of non-absolutely summing operators between ? _p spaces and of Davis and Johnson (Stud Math 51:81?C85, 1974) on the existence of compact non-absolutely summing linear operators. We also point out that some of our results are sharp.     

Folding of fiber composites with a hyperelastic matrix

This paper presents an experimental and numerical study of the folding behavior of thin composite materials consisting of carbon fibers embedded in a silicone matrix. The soft matrix allows the fibers to microbuckle without breaking and this acts as a stress relief mechanism during folding, which allows the material to reach very high curvatures. The experiments show a highly non-linear moment vs. curvature relationship, as well as strain softening under cyclic loading. A finite element model has been created to study the micromechanics of the problem. The fibers are modeled as linear-elastic solid elements distributed in a hyperelastic matrix according to a random arrangement based on experimental observations. The simulations obtained from this model capture the detailed micromechanics of the problem and the experimentally observed non-linear response. The proposed model is in good quantitative agreement with the experimental results for the case of lower fiber volume fractions but in the case of higher volume fractions the predicted response is overly stiff.     

Compliant multistable structural elements

Compliant multistable structures are presented which exhibit a large geometric change when actuated between their stable states. It is demonstrated how asymmetric-bistability is achieved through the combination of linear and nonlinear springs. Finite element analytical techniques are provided which enable the design of such structures, and which illustrate how the presence of imperfections can substantially alter their structural performance. A multistable structure is developed which consists of four connected bistable tetrahedral units. The validity of the analytical techniques is confirmed through observation of several physical models.     

When every multilinear mapping is multiple summing

In this paper we give a systematized treatment to some coincidence situations for multiple summing multilinear mappings which extend, generalize and simplify the methods and results obtained thus far. The application of our general results to the pertinent particular cases gives several new coincidences as well as easier proofs of some known results (© 2009 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Summability and estimates for polynomials and multilinear mappings

In this paper we extend and generalize several known estimates for homogeneous polynomials and multilinear mappings on Banach spaces. Applying the theory of absolutely summing nonlinear mappings, we prove that estimates which are known for mappings on ?_p spaces in fact hold true for mappings on arbitrary Banach spaces.