Chemical reduction of hematite by sodium borohydride

Well-crystallized hematite was suspended in water and treated at room-temperature (RT) with sodium borohydride. The product of the reaction is a highly magnetic black powder, which is stable at RT. The NaBH₄ treatment converts about half of the hematite to an amorphous Fe–B alloy and to a small fraction of sub-micron sized, amorphous metallic-Fe nodules. Heating at 400°C of this composite has resulted in the crystallization and/or oxidation of more than half of the amorphous Fe–B phase to α-Fe and Fe₃O₄ and B₂O₃, respectively. After treatment at 800°C, the metallic Fe and the amorphous Fe–B have completely vanished, and the resulting product consists of hematite and FeBO₃ embedded in the matrix of α-Fe₂O₃.     

Dielectric spectroscopic analysis of polyvinyl chloride nanocomposites loaded with Fe2O3 nanocrystals

Iron oxide (α‐Fe₂O₃) nanocrystals powder was successfully synthesized via the sol‐gel method. The microstructural examination of the synthesized nanocrystals confirmed the formation of α‐Fe₂O3 (hematite) structure using X‐ray diffraction and Fourier transform infrared. The synthesized nano‐hematite powder with different weight percentage up to 5 wt% was introduced to polyvinyl chloride (PVC) to fabricate PVC/Fe₂O₃ nanocomposites using the solution‐cast technique. The dielectric spectroscopic analysis for the investigated samples has been studied at room temperature and at different temperatures up to 120°C. The real part of the permittivity (ε^′) exhibited a significant dependence on filler concentrations throughout whole temperature range. However, the dependency of both of the loss tangent (tanδ ) and AC conductivity (σ_ac) on filler concentrations is more pronounced at temperatures higher than room temperature. The obtained values of tan δ for the investigated nancomposites referred to the α‐relaxation around 70°C, which is close to glass transition temperature of the investigated PVC. The dependency of the dielectric strength on Fe₂O₃ nanofiller concentration was observed with enhancement in the dielectric strength reach to 20.5% for PVC/0.7 wt% Fe₂O₃ nanocomposite higher than the recorded value for the pristine PVC.     

Heat capacity of superfine oxides of iron under applied magnetic fields

Heat capacity is one of the most characteristic and important properties when the peculiarities of magnetic nanosystems are studied. In these systems the magnetic ordering becomes obvious due to the thermal effects such as heat capacity anomalies. It was considered earlier that heat capacity change under magnetic fields applied is slight and it cannot be taken into account in thermodynamic calculations. However the experimental heat capacity data for ferrofluids under magnetic fields applied show that field and temperature heat capacity dependences have a complicated behavior and in magnetic fields an essential heat capacity change takes place. On the other hand in the literature the contradictory data about heat capacity of nanoparticles appear. According to some papers nanoparticles heat capacity can exceed heat capacity of a bulk material a few times.     

Photoelectrochemical Behavior of Sn‐Doped α‐Fe2O3 Photoanode with Different Reducer

Hematite has been considered as one of the most promising photoanode candidates for solar water‐splitting. However, its photoelectrochemical (PEC) efficiency is largely constrained by its sluggish oxygen evolution reaction. In this work, the photoelectrochemical performance of hematite was investigated in electrolytes containing different sacrificial agent. The photocurrent densities, onset potential, charge transfer resistance, Helmholtz capacitance at semiconductor liquid junctions (SCLJs), and their correlations were systematically studied. It was found that the onset potential is around the C_H peak potential and is related to the photovoltage. The surface states pinning the Fermi levels of the hematite photoanode are related to the adsorbed water molecules regardless of the sacrificial agents in the electrolyte.     

Synthesis of mesoporous functional hematite nanofibrous photoanodes by electrospinning

Iron(III) oxide (hematite, Fe₂O₃) nanofibers, as visible light‐induced photoanode for water oxidation reaction of a water splitting process, were fabricated through electrospinning method followed by calcination treatment. The prepared samples were characterized with scanning electron microscopy, and three‐electrode galvanostat/potentiostat for evaluating their photoelectrochemical (PEC) properties. The diameter of the as‐spun fibers is about 300 nm, and calcinated fibers have diameter less than 110 nm with mesoporous structure. Optimized multilayered electrospun α‐Fe₂O₃ nanostructure mats showed photocurrent density of 0.53 mA/cm² under dark and visible illumination conditions at voltage 1.23 V and constant intensity (900 mW/cm²). This photovoltaic performance of nanostructure mats makes it suitable choice for using in the PEC water splitting application as an efficient photoanode. This method, if combined with appropriate flexible conductive substrate, has the potential for producing flexible hematite solar fuel generators. Copyright © 2015 John Wiley & Sons, Ltd.     

Effect of zinc on the catalytic activity of hematite in ethylbenzene dehydrogenation

The effect of zinc on the performance of hematite-based catalysts in ethylbenzene dehydrogenation was studied. Zinc acts as a structural promoter stabilizing the active phase of the catalysts. This revised version was published online in June 2006 with corrections to the Cover Date.     

VSM and Mössbauer study of nanostructured hematite

In the present work, we have synthesized nanostructured hematite samples using chemical precipitation method. The crystal structure and the grain size of the samples were studied using XRD. The zero field cooled and field cooled magnetization curves of the samples were recorded in the temperature range from 300 to 10 K. The variations of Morin transition temperature and blocking temperature with the grain size of the samples were investigated. The hysterics curves of the samples were recorded and the samples showed a superparamagnetic nature at room temperature whereas, at 10 K the samples showed open hysteresis curves. The sample with smaller grain size showed higher value of coercivity compared to samples with larger grain size. Mössbauer spectra of the samples were recorded and the grain size dependence on Mössbauer parameters was investigated.     

Determination of the Recoilless Fraction in Iron Oxide Nanoparticles Using the Two-lattice Method

We propose a two-lattice method for direct determination of the recoilless fraction using a single room-temperature transmission Mössbauer measurement. The method is first demonstrated for the case of iron and metallic glass two-foil system and is next generalized for the case of physical mixtures of two powders. We further apply this method to determine the recoilless fraction of hematite and magnetite particles. Finally, we provide direct measurement of the recoilless fraction in nanohematite and nanomagnetite with an average particle size of 19nm. A list of values obtained for the recoilless fraction in various materials using the two-lattice method is given.     

Effect of Inorganic Ions on Oleate Adsorption at a Nigerian Hematite–Water Interface

Using “pure” natural hematite selected from a high silica Nigerian hematitic ore, oleate adsorption densities at the hematite–water interface were determined in the presence of various inorganic ions (anions and cations) of different charges and at varying concentrations. Adsorption density was determined using electrical conductivity measurements. The specific surface area of the hematite particles was determined using the method of adsorption of paranitrophenol in aqueous solution. Inorganic ions in solution depressed oleate adsorption at the aqueous hematite surface. The charge of the ion proved to be the dominant factor determining the depression of oleate adsorption. Ionic strength also was an influence, up to a limiting value at which monolayer oleate coverage of the hematite surface occurred. The inorganic ions in solution are considered to function through nonspecific adsorption in the diffuse region of the electric double layer.     

Kinetics of thermal dehydroxylation of aluminous goethite

The kinetics of dehydroxylation of synthetic aluminous goethite was studied using isothermal and non-isothermal thermogravimetry. The complete isothermal dehydroxylation can be described by the Johnson-Mehl equation with up to three linear regions in plots of lnln [1/(1–y)]vs. Int Kinetics for the initial stage of dehydroxylation changed from diffusion to first-order through the temperature range 190 to 260°C. The rate of dehydroxylation was reduced by Al-substitution and increased with temperature. Activation energy for dehydroxylation, calculated from the time to achieve a given dehydroxylation extent, varied depending on the extent of dehydroxylation and Al-substitution. Non-stoichiometric OH existed in goethite and some remained in hematite after the complete crystallographic transition.