Carbon nanotube-ionic liquid nanocomposite modified carbon-ceramic electrode for determination of dopamine in real samples

Room temperature 1-butyl-3-methylimidazolium tetraflouroborate ([BMIM][BF₄]) ionic liquid was employed for dispersion of multi walled carbon nanotubes (MWCNTs) and the formation of nanocomposite on the surface of a carbon-ceramic electrode. The surface of the modified electrode was characterized using scanning electron microscopy and electrochemical impedance spectroscopy. The modified electrode exhibited excellent electrochemical activity to oxidation of dopamine (DA); whereas electro oxidation of ascorbic acid (AA) was not seen and electro oxidation of uric acid (UA) appeared at a more positive potential than DA. The multi walled carbon nanotube-ionic liquid nanocomposite modified carbon-ceramic electrode was used for the selective determination of DA in the presence of high levels of AA and UA using differential pulse voltammetry. The calibration curve for DA was linear in the range of 3.00 to 130 µM with the detection limit (S/N=3) of 0.87 µM. The present electrode was successfully applied to the determination of DA in some commercial pharmaceutical samples and human blood serum.      

Development and characterization of hydroquinone-loaded nanofiber for topical delivery: effect of chitosan

Hydroquinone (HQ) loaded polymer solution was electrospun for its topical application. Nanofibers were then investigated in terms of stability, drug release, and antifungal activity. The effect of chitosan (CS) was investigated on the viscosity, stability, drug release, and antifungal activity of the developed formulation. Results indicate a significantly stable HQ-loaded nanofiber formulation. The addition of CS caused hydration of the drug delivery system and enhanced drug release but reduced its stability. HQ-loaded nanofiber mat showed significant antifungal activity, however, there was no inhibition zone in samples containing CS.     

On existence and multiplicity of similarity solutions to a nonlinear differential equation arising in magnetohydrodynamic Falkner–Skan flow for decelerated flows

Previously, existence and uniqueness of a class of monotone similarity solutions for a nonlinear differential equation arising in magnetohydrodynamic Falkner–Skan flow were considered in the case of accelerating flows. It was shown that a solution satisfying certain monotonicity properties exists and is unique for the case of accelerated flows and some decelerated flows. In this paper, we show that solutions to the problem can exist for decelerated flows even when the monotonicity conditions do not hold. In particular, these types of solutions have nonmonotone second derivatives and are, hence, a distinct type of solution from those studied previously. By virtue of this result, the present paper demonstrates the existence of an important type of solution for decelerated flows. Importantly, we show that multiple solutions can exist for the case of strongly decelerated flows, and this occurs because of the fact that the solutions do not satisfy the aforementioned monotonicity requirements. Copyright © 2015 John Wiley & Sons, Ltd.     

Laser based fabrication of chitosan mediated silver nanoparticles

We report fabrication of silver nanoparticles (Ag NPs) by laser ablation technique in different concentrations of aqueous chitosan solution. The ablation process of silver plate was carried out by using a nanosecond Q-switched Nd:YAG pulsed laser and the characterization of Ag NPs was done by Transmission electron microscopy, UV-Vis spectroscopy, and X-ray diffraction. UV-visible plasmon absorption spectra revealed that the formation efficiency as well as the stability of nanoparticles was increased by addition of chitosan. On the other hand, the size decrement of nanoparticles was more remarkable in the higher chitosan concentration.     

Mononitration of phenol derivatives by guanidinium nitrate and silica sulfuric acid under mild conditions

A mixture of guanidinium nitrate and silica sulfuric acid acts as mild and heterogeneous media for the efficient mono nitration of phenolic compounds in dichloromethane at room temperature.     

Removal of toxic hexavalent chromium by polyaniline modified clinoptilolite nanoparticles

In this work clinoptilolite nanoparticles were modified with conducting polyaniline by the polymerization of anilinium cations in and out side of the clinoptilolite channels and a nanocomposite of polyaniline/clinoptilolite was obtained. Cations (Na⁺, K⁺, Mg²⁺, Ca²⁺...) in the natural clinoptilolite structure were exchanged with anilinium cations by the treatment of clinoptilolite nanoparticles in an acidic solution of aniline monomer. The cation exchange process was confirmed by elemental analysis of nitrogen and carbon atoms of anilinium cations in clinoptilolite dry powder after treatment. The polyaniline/clinoptilolite nanocomposite was obtained by the oxidative polymerization of anilinium cations within the clinoptilolite structure. The polyaniline/clinoptilolite nanocomposite was characterized utilizing FT-IR and X-ray diffraction measurements and was used for the removal of Cr(VI) from aqueous solutions in chromate anion form as an important water pollutant. The effect of a number of parameters such as initial concentration of Cr(VI), amount of nanocomposite and contact time on the removal efficiency of Cr(VI) by polyaniline/clinoptilolite nanocomposite were determined and optimized. It was found that after 5 min of exposure of nanocomposite powder with Cr(VI) solutions in the concentration range of 25 to 100 ppm, more than 98% of chromate anions can be removed and the Cr(VI) removal capacity per one gram of nanocomposite is about 0.3 mmol of Cr(VI).     

Quantum Watermarking Using Entanglement Swapping

Digital watermarking is the process of embedding information into a digital signal in a way that is difficult to remove. In this article a secure quantum watermarking using entanglement swapping is proposed. Here the entanglement swapping is employed to build up a hidden layer of secure message under the conventional first layer of secure information sequence. In this protocol by insuring the security of transmission of the first layer of information sequence the security of the hidden secret messages is also proved to be reliable regardless of whether the hidden channel has been detected or not.     

Chemical synthesis of tungsten-copper nanocomposite powder

In this study homogeneous powders of CuWO₄ and WO₃ was produced from ammonium para-tungstate (APT) and copper nitrate. Then, the product was used to prepare nano-sized W-Cu powder. Hence, a mixture of ammonium paratungstate and copper nitrate with predetermined weight proportion was made in distilled water, while the content of the beaker was being stirred at a certain speed to reach the desired composition of W-20 wt % Cu. Mixture was heated to 80–100°C for 6 h. Also, pH range was adjusted at about 3–4. The mixture was then evaporated and dried in the air. To reach W-Cu composite powder, the precursor powders burned out at 520°C for 2 h in the air to form W-Cu oxide powder and then were ball milled and reduced in H₂ atmosphere to convert it into W-Cu composite powder. The resulting powders were evaluated using scanning electron microscopy, X-ray diffraction, thermogravimetric analysis and differential thermal analysis techniques. The results showed that homogeneous powders of W-Cu with particle size of around 100 nm and a nearly spherical shape could be obtained by this process. Each particle include smaller parts with size of around 20–30 nm.     

A New Quantum Gray-Scale Image Encoding Scheme

In this paper, a new quantum images encoding scheme is proposed. The proposed scheme mainly consists of four different encoding algorithms. The idea behind of the scheme is a binary key generated randomly for each pixel of the original image. Afterwards, the employed encoding algorithm is selected corresponding to the qubit pair of the generated randomized binary key. The security analysis of the proposed scheme proved its enhancement through both randomization of the generated binary image key and altering the gray-scale value of the image pixels using the qubits of randomized binary key. The simulation of the proposed scheme assures that the final encoded image could not be recognized visually. Moreover, the histogram diagram of encoded image is flatter than the original one. The Shannon entropies of the final encoded images are significantly higher than the original one, which indicates that the attacker can not gain any information about the encoded images.     

Penta-SiC5 monolayer: A novel quasi-planar indirect semiconductor with a tunable wide band gap

In this paper, by using of the first principles calculations in the framework of the density functional theory, we systematically investigated the structure, stability, electronic and optical properties of a novel two-dimensional pentagonal monolayer semiconductors namely penta-SiC₅ monolayer. Comparing elemental silicon, diamond, and previously reported 2D carbon allotropes, our calculation shows that the predicted penta-SiC₅ monolayer has a metastable nature. The calculated results indicate that the predicted monolayer is an indirect semiconductor with a wide band gap of about 2.82 eV by using Heyd–Scuseria–Ernzerhof (HSE06) hybrid functional level of theory which can be effectively tuned by external biaxial strains. The obtained exceptional electronic properties suggest penta-SiC₅ monolayer as promising candidates for application in new electronic devices in nano scale.