Crosslinkable high dielectric constant polymer dielectrics for low voltage organic field‐effect transistor memory devices

I n this study, we successfully synthesized water/methanol soluble random copolymers with a high dielectric constant, poly(n‐(hydroxymethyl) acrylamide‐co‐5‐(9‐(5‐(diethylamino)pentyl)?2‐(4‐vinylphenyl)?9H‐fluorene(P(NMA‐co‐F6NSt)), which contained chemical crosslinkable segment (NMA) and hole trapping building block (F6NSt). The feeding molar ratios of two monomers (NMA:F6NSt) were set as 100:0, 95:5, 80:20, and 67:33 for the copolymers of P1 , P2 , P3, and P4 , respectively. The crosslinked P(NMA‐co‐F6NSt) thin film could serve as both dielectric and charge storage layers in organic field‐effect transistor (OFET) memory device and exhibited high k (i.e., 4.91–6.47) characteristics, leading to a low voltage operation and a small power consumption. Devices based on the P1 ‐ P4 dielectrics showed excellent insulating properties and good charge storage performance under a low operating voltage in a range of ±5V because of tightly network structures and well‐dispersed trapping cites. In particular, P3 ‐based memory device exhibited a large memory window of 4.13 V with stable data retention stability over 10⁴ s, a large on/off ratio of 10⁴, and good endurance characteristics as high as 200 cycles. The above results suggested that a high‐performance OFET memory device could be facilely achieved using the novel crosslinkable high‐k copolymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3224–3236     

Cole-Cole方程参数对细胞介电频谱的影响

为探讨Cole-Cole方程8个参数(Δε1,Δε2,εh,κl,f1,f2,β1,β2)对细胞介电频谱的影响,采用改变单个参数,固定其他参数的方法,观察介电频谱的变化.结果显示:Δε1影响低频介电频谱和Cole-Cole(ε′)图;Δε2影响高频介电频谱、Cole-Cole(ε′)图和Cole-Cole(κ′)图;εh影响ε′(f)、Cole-Cole(ε′)图和tgδ(f);κl对κ′(f)和Cole-Cole(κ′)图有影响;f1影响低频介电频谱;f2影响高频介电频谱;β1影响Cole-Cole(ε′)和tgδ(f);β2对高频介电频谱有影响.可见Cole-Cole方程作为细胞介电频谱的数学模型,其参数变化有规律可循.     

Influences of Sr2+ Doping on Microstructure,Giant Dielectric Behavior,and Non-Ohmic Properties of CaCu3Ti4O12/CaTiO3 Ceramic Composites

The microstructure, dielectric response, and nonlinear current-voltage properties of Sr²⁺-doped CaCu₃Ti₄O₁₂/CaTiO₃ (CCTO/CTO) ceramic composites, which were prepared by a solid-state reaction method using a single step from the starting nominal composition of CCTO/CTO/xSrO, were investigated. The CCTO and CTO phases were detected in the X-ray diffraction patterns. The lattice parameter increased with increasing Sr²⁺ doping concentration. The phase compositions of CCTO and CTO were confirmed by energy-dispersive X-ray spectroscopy with elemental mapping in the sintered ceramics. It can be confirmed that most of the Sr²⁺ ions substituted into the CTO phase, while some minor portion substituted into the CCTO phase. Furthermore, small segregation of Cu-rich was observed along the grain boundaries. The dielectric permittivity of the CCTO/CTO composite slightly decreased by doping with Sr²⁺, while the loss tangent was greatly reduced. Furthermore, the dielectric properties in a high-temperature range of the Sr²⁺-doped CCTO/CTO ceramic composites can be improved. Interestingly, the nonlinear electrical properties of the Sr²⁺-doped CCTO/CTO ceramic composites were significantly enhanced. The improved dielectric and nonlinear electrical properties of the Sr²⁺-doped CCTO/CTO ceramic composites were explained by the enhancement of the electrical properties of the internal interfaces.     

Preparation of Low-dielectric Permittivity Polyimide Resins with High Surface Activity from Chemically Bonded Hyperbranched Polysiloxane

Thermosetting resin matrix is the key component of advanced wave-transparent composites,where low dielectric constant,excellent processability,high thermal stability,as well as good bonding ability are required for resins.Herein,we prepared a series of phenylethynyl terminated polyimide(PI)resins by grafting amine-functionalized hyperbranched polysiloxane(HBPSi)to PI chains during the in situ polymerization.The effects of HBPSi on the processability of oligomers,molecular packing,thermal stability,dielectric property and bonding ability to reinforce Kevlar fibers of the cured PI/HBPSi composite resins have been examined in detail.The dielectric constants of the cured composite resins were greatly reduced from 3.29 to 2.19 without compromising its processability and thermal stability.Meanwhile,the 10 wt％HBPSi-containing PI resin demonstrated better bonding ability to reinforce fibers with the interfacial shear strength(IFSS)of 37.64 MPa,compared with that of neat PI-6 matrix(27.34 MPa),and better adhesion to metal with the lap shear strength of 10.48 MPa,50％higher than that of neat resin PI-6(6.98 MPa).These resultant PI/HBPSi composite resins exhibit excellent comprehensive properties,indicating their great potential as low-dielectric constant resin matrix in radar radome.     

Dielectric Spectroscopy Analysis of Liquid Crystals Recovered from End-of-Life Liquid Crystal Displays

In the present work, the dielectric properties of recycled liquid crystals (LCs) (non-purified, purified, and doped with diamond nanoparticles at 0.05, 0.1, and 0.2 wt%) were investigated. The studied LC mixtures were obtained from industrial recycling of end-of-life LC displays presenting mainly nematic phases. Dielectric measurements were carried out at room temperature on a frequency range from 0.1 to 10⁶ Hz using an impedance analyzer. The amplitude of the oscillating voltage was fixed at 1 V using cells with homogeneous and homeotropic alignments. Results show that the dielectric anisotropy of all purified samples presents positive values and decreases after the addition of diamond nanoparticles to the LC mixtures. DC conductivity values were obtained by applying the universal law of dielectric response proposed by Jonscher. In addition, conductivity of the doped LC mixtures is lower than that of the undoped and non-purified LC.     

Polarizable coarse‐grained models for molecular dynamics simulation of liquid cyclohexane

Force field parameters for polarizable coarse‐grained (CG) supra‐atomic models of liquid cyclohexane are proposed. Two different bead sizes were investigated, one representing two fine‐grained (FG) CH₂r united atoms of the cyclohexane ring, and one representing three FG CH₂r united atoms. Electronic polarizability is represented by a massless charge‐on‐spring particle connected to each CG bead. The model parameters were calibrated against the experimental density and heat of vaporization of liquid cyclohexane, and the free energy of cyclohexane hydration. Both models show good agreement with thermodynamic properties of cyclohexane, yet overestimate the self‐diffusion. The dielectric properties of the polarizable models agree very well with experiment. © 2015 Wiley Periodicals, Inc.     

Fully printed flexible audio system on the basis of low‐voltage polymeric organic field effect transistors with three layer dielectric

Fully mass printed, flexible and truly polymeric organic field effect transistors consisting of a three layer dielectric made of CYTOP (low‐k), PVA (intermediate) and P(VDF‐TrFE‐CTFE)(high‐k) are introduced. Gravure‐, flexo‐and screen printing were selected as highly productive manufacturing technologies. These OFETs work at strongly reduced voltages and show high field effect mobility (µ = 0.2 cm²/Vs) and remarkable good bias stress stability at very high current density (50 µA/mm). Fully printed OFETs are used for the realization of ring oscillators working in the kHz regime at reduced supply voltage (10 V). In combination with printed fully polymeric piezoelectric loudspeakers, this work shows for the first time fully printed flexible audio systems. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1409–1415     

Dipolar Rotors Orderly Aligned in Mesoporous Fluorinated Organosilica Architectures

New mesoporous covalent frameworks, based on hybrid fluorinated organosilicas, were prepared to realize a periodic architecture of fast molecular rotors containing dynamic dipoles in their structure. The mobile elements, designed on the basis of fluorinated p‐divinylbenzene moieties, were integrated into the robust covalent structure through siloxane bonds, and showed not only the rapid dynamics of the aromatic rings (ca. 10⁸ Hz at 325 K), as detected by solid‐state NMR spectroscopy, but also a dielectric response typical of a fast dipole reorientation under the stimuli of an applied electric field. Furthermore, the mesochannels are open and accessible to diffusing in gas molecules, and rotor mobility could be individually regulated by I₂ vapors. The iodine enters the channels of the periodic structure and reacts with the pivotal double bonds of the divinyl‐fluoro‐phenylene rotors, affecting their motion and the dielectric properties.     

A Chemically Triggered and Thermally Switched Dielectric Constant Transition in a Metal Cyanide Based Crystal

A dielectric constant transition is chemically triggered and thermally switched in (HPy)₂[Na(H₂O)Co(CN)₆] ( 2 , HPy=pyridinium cation) by single‐crystal‐to‐single‐crystal transformation and structural phase transition, respectively. Upon dehydration, (HPy)₂[Na(H₂O)₂Co(CN)₆] ( 1 ) transforms to its semi‐hydrated form 2 , accompanying a transition from a low‐dielectric state to a high‐dielectric state, and vice versa. This dielectric switch is also realized by a structural phase transition in 2 that occurs between room‐ and low‐temperature phases, and which corresponds to high‐ and low‐dielectric states, respectively. The switching property is due to the variation in the environment surrounding the HPy cation, that is, the hydrogen‐bonding interactions and the crystal packing, which exert predominant influences on the dynamics of the cations that transit between the static and motional states.     

On shapes of body waves in periodically inhomogeneous, magnetostrictive, dielectric materials

The shapes of shear body waves in periodically inhomogeneous, magnetostrictive, dielectric media are studied with emphasis on the partial (elastic and magnetostrictive) wave motions coupled to produce magnetoelastic waves __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 7, pp. 57–63, July 2006.