连续级联喇曼光纤激光器耦合波方程的修正

从最基本的耦合波方程出发，考虑光波正反向传输的情况下，推导出了一个全面的、准确的关于连续级联喇曼光纤激光器的理论模型，描述了各级Stokes光波功率沿光纤长度的变化.指出了相关一些文献中存在的不足，并且给出了多级斯托克斯光波相互作用的有效作用面积的表达式.此模型有助于喇曼光纤激光器的设计.     

宽带放大器用碲基掺铒光纤结构参量的设计考虑

利用光波导理论及均匀展宽四能级模型，研究了宽带放大器用阶跃型折射率分布碲基掺铒光纤的结构参量—纤芯半径和相对折射率差的设计考虑.理论研究表明，在单模传输条件下，为获取最大信号增益，宜选择相对折射率差大的碲基掺铒光纤来构建光纤放大器.相对折射率差一定的情况下，在高泵浦功率、小信号输入或光纤长度短于各信道最佳增益长度时，选择纤芯半径大的碲基掺铒光纤可以得到大的信号增益；反之，宜选择纤芯半径小的碲基掺铒光纤.     

退火温度对Fe基纳米晶粉芯磁致频移特性影响的研究

研究了充有不同温度退火Fe基纳米晶粉芯LC回路的磁致频移特性（MFS），发现充有不同温度退火Fe基纳米晶粉芯LC回路的磁致频移不同，充有经600℃退火Fe基纳米晶粉芯LC回路的磁致频移最灵敏。     

Synthesis and characterization of a novel nano-scale magnetic solid base catalyst involving a layered double hydroxide supported on a ferrite core

A nano-scale magnetic solid base catalyst MgAl-OH-LDH/MgFe₂O₄ (where LDH denotes layered double hydroxide) composed of MgAl-OH-LDH Brønsted base catalytic layers coated on MgFe₂O₄ spinel cores has been prepared. A magnetic precursor MgAl-CO₃-LDH/MgFe₂O₄ was prepared by a method involving separate nucleation and aging steps, and subsequently calcined to give a mixed metal oxide composite MgAl(O)/MgFe₂O₄ which was rehydrated to give MgAl-OH-LDH/MgFe₂O₄. The structure and magnetic properties of the nano-scale magnetic solid base MgAl-OH-LDH/MgFe₂O₄, together with those of the magnetic precursor MgAl-CO₃-LDH/MgFe₂O₄ and MgFe₂O₄ were characterized by XRD, XPS, low temperature N₂ adsorption and vibrating sample magnetometry (VSM). The MgAl-OH-LDH/MgFe₂O₄ composite possesses a mesoporous structure with pore size ranging from 2 to 20 nm with particle size mainly in the range 35-130 nm. The catalytic properties of MgAl-OH-LDH/MgFe₂O₄ were evaluated using the self-condensation of acetone at 273 K as a probe reaction. The results showed that the conversion of acetone to diacetone alcohol reached the thermodynamic equilibrium value of 23% at 273 K. The catalyst was easily recovered through application of an external magnetic field, and when the reclaimed catalyst was used in a second run for the same reaction, the reactivity remained unchanged.     

27,28P+28Si总反应截面增强及可能相关的机制

测量了27,28P和相应同中子异位素在28Si靶上的中能反应截面.测得N=12和13同中子异位素的反应截面在Z=15处突然增大.对Z≤14同中子异位素和28P的实验数据结果可以用改进的光学极限近似的Glauber理论很好地描述.28P的反应截面能够用扩大核芯以改进的Glauber理论来解释.但是,用改进光学极限和少体近似的Glauber理论却低估了27P的实验数据.理论分析表明,扩大的核芯加质子晕可能是响应27P+28Si反应截面增强的机制. The reaction cross sections of~(27,28)P and the corresponding isotones on Si target were measured at intermediate energies. The measured reaction cross sections of the N=12 and 13 isotones show an abrupt increase at Z=15. The experimental results for the isotones with Z≤14 and~(28)P can be described well by the modified Glauber theory of the optical limit approach. The enhancement of the reaction cross section for~(28)P could be explained by the modified Glauber theory with an enlarged core. Theoretical ana...     

Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006     

圆柱型正交各向异性圆形薄板的非线性非对称弯曲问题（Ⅱ）

本文利用“正则摄动法”［２］研究文献［１］中由“两变量法”［３］所得到的关于Ｗｎｍ，和的递推方程和递推边界条件的求解问题。求得了本问题的一致有效渐近解，最后作为实例，我们利用“混合摄动法”［４］研究了轴对称线性弯曲问题，并将所得结果与文献［５］中给出的精确解相比较，两者基本上是一致的。     

Synthesis and Structure Characterization of a Tetranuclear Manganese(Ⅲ) Complex:[Mn4O2(O2CMe)6(MeOH)2(dbm)2]·2MeCOOH·2CH2Cl2

The title compound, [Mn4O2(O2CMe)6(MeOH)2(dbm)2]·2MeCOOH·2CH2Cl2 (Hdbm = dibenzoylmethane), has been synthesized and structurally determined by single-crystal X-ray diffraction. The crystal belongs to triclinic, space group P(-l), with a = 10.729(3), b = 12.269(3), c =13.085(4) (A), a = 106.367(3), β = 107.643(2), γ = 94.771(2)°, V = 1547.9(7) (A)3, Z = 1,C50H64Cl4Mn4O24, Mr= 1410.57, Dc= 1.513 g/em3, F(000) = 724, Rint = 0.0147, T = 293(2) K and μ = 1.046 mm-1. The fimal R = 0.0359 and wR = 0.0938 for 5791 observed reflections with I ＞ 2( )I).The structure of the complex consists of one [Mn4(μ3-O)2]8+ core with four coplanar Mn atoms disposed in an extended "butterfly-like" arrangement and two O atoms triply bridging each "wing",and the peripheral ligation is provided by six μ2-MeCO2-, two terminalμ2-dbm- groups at the two hydrogen bonding interactions are found within the structure of the compound.     

液芯光纤光度法在乙醇水溶液中测定铂(Ⅱ)、钛(Ⅳ)

采用氟塑料长光纤管，以４２％乙醇水溶液作液芯，组成液芯光纤，基于铂与氯化亚锡、钛与过氧化氢形成黄色络合物在乙醇水溶液中很稳定，拟定了测定铂、钛的液芯光纤光度法。该法灵敏度高，用 １ｍ长光纤作吸收池，铂的灵敏度为 ４． ８４５ Ａ／ｍｇ· Ｌ－１，钛的灵敏度为１．４１Ａ／ｍｇ· Ｌ－１（Ａ为吸光度），与常规法（１ｃｍ）比色皿相比灵敏度提高了 １００倍。该法测定了催化剂中铂，煤灰粉中钛，结果与推荐值相符。     

不同引发核树枝状大分子的合成

含不同分支官能团树枝状大分子的合成是目前研究的一个热点。文献报道的有两方向引发核、三方向引发核、四方向引发核、六方向引发核等结构新颖的树枝状分子。本文综述了不同引发核及其衍生物在树枝状大分子合成中的应用。