Luminescent amphiphilic nanogels by terpyridine-Zn(II) complexation of polymeric micelles

In this work, we investigated terpyridine (tpy)/Zn(II) complexation for the crosslinking of polymeric micelles of the branched poly(ethylene oxide)–poly(propylene oxide) block copolymer Tetronic® 1107 (T1107) in water and produce physically stable amphiphilic luminescent nanogels. Nanoparticles displayed a size of 235 ± 25 and 318 ± 57 nm before and after Zn(II) crosslinking, respectively, as measured by dynamic light scattering. High-resolution scanning electron microscopy analysis revealed the multimicellar nature of the crosslinked nanoparticles. In addition, Zn(II) complexation prevented nanoparticle disassembly after extreme dilution below the critical micellar concentration and reduced the minimum concentration required for the reverse thermal gelation of concentrated aqueous T1107 systems. The cell compatibility and uptake were initially assessed in the murine macrophage cell line RAW 264.7. Results showed that complexation increases the cell compatibility of the nanoparticles with respect to the non-complexed counterparts. In addition, non-crosslinked nanoparticles accumulated in the cell membrane, while the complexed ones were internalized, as observed by confocal laser scanning fluorescence microscopy. Then, the antiproliferative activity of the crosslinked nanoparticles was confirmed in the rhabdomyosarcoma cell line Rh30; their inhibitory concentration 50 (IC₅₀) being 101 μg/mL (6.7 μM). Finally, the encapsulation and release of the hydrophobic antiretroviral efavirenz was characterized in vitro. Complexation slightly reduced the release kinetics with respect to the pristine nanoparticles. Overall results demonstrate the promise of this simple modification strategy to produce amphiphilic nanogels with a set of advantageous physicochemical, optical, and biological properties.     

A comprehensive review on surface modification,structure interface and bonding mechanism of plant cellulose fiber reinforced polymer based composites

Abstract

Plant cellulose fiber polymer composites are readily applied in wide range of applications due to ecological and economical alternative to traditional materials. The considerable amount of residues and organic wastes from agricultural process are still employed as lower energy resource. Organic materials are generally disposed in composting, landfilling or anaerobic digestion. The utilization of these wastes in plant fiber composites shows significant alternative and environmental friendly in nature. The production of plant cellulose fiber composite with higher structural properties is optimized by interfacial bonding between polymer and reinforced fiber. The interface plays a vital role in regulating mechanical properties by distributing bonds and stress transferring, which is one of least understood element of composites. This paper presents the comprehensive review of fiber structures, different modification techniques to reduce the incompatibility between matrix and fiber, assessment of structure interface and bonding, clarifies the interfacial adhesion of cellulose fiber composites.     

锂二次电池中的原位聚合电解质

聚合物电解质主要分为凝胶聚合物电解质和固态聚合物电解质两种类型,均能够提升锂二次电池的性能。其中,凝胶聚合物电解质是利用增塑剂实现聚合物基质的凝胶化,将有机液态电解液固定在三维网络结构中,因此同时具备液态的离子扩散速率和固态材料的机械性能;而固态聚合物电解质是一种完全没有液态电解质的体系,利用聚合物基体的极性实现锂盐的解离,以聚合物分子链的运动实现离子传输。相对于传统的非原位法制备的聚合物电解质而言,原位聚合反应制备的聚合电解质能够有效改善电解质与电极的界面相容性、简化电池组装工艺、降低制造成本。本文综述了当前原位聚合电解质在锂二次电池中应用的研究进展,并展望了原位聚合电解质的应用前景和未来挑战。     

超级铝热剂的制备、表征及其燃烧催化作用

用纳米铝粉和纳米氧化铅、纳米氧化铜和纳米三氧化二铋为原料,采用超声分散复合的方法,制备了纳米超级铝热剂Al/PbO、Al/CuO和Al/Bi₂O₃。采用X射线粉末衍射(XRD)、扫描电镜及能谱分析(SEM-EDS)和红外光谱(IR)对原料和产物的物相、组成、形貌和结构进行分析表征;运用差示扫描量热仪(DSC)评估三种超级铝热剂与双基推进剂主要组分的相容性;研究了3种超级铝热剂对双基推进剂燃烧性能的影响。结果表明,Al/PbO、Al/CuO和Al/Bi₂O₃与推进剂主要组分硝化棉(NC)、硝化棉/硝化甘油(NC/NG)混合物和吉纳(DINA)的相容性均良好,而与黑索今(RDX)和1,3-二甲基-1,3-二苯基脲(C₂)相对较为敏感;含三种纳米超级铝热剂的双基推进剂表现出优异的燃烧性能。     

Enhancing toughness of poly (lactic acid)/Thermoplastic polyurethane blends via increasing interface compatibility by polyurethane elastomer prepolymer and its toughening mechanism

Due to the environmental pollution caused by the petroleum-based polymer, poly (lactic acid) (PLA), a biodegradable and biocompatible polymer that obtained from natural and renewable sources, has attracted widespread attention. However, the brittleness of PLA greatly limits its application. In this study, the super toughened PLA-based blends were obtained by compatibilizing the PLA/thermoplastic polyurethane (TPU) blends with the polyurethane elastomer prepolymer (PUEP) as an active compatibilizer. The mechanical properties, thermal properties and corresponding toughening mechanism of PLA/TPU/PUEP system were studied by tensile test, instrumented impact test, dynamic mechanical analysis (DMA), scanning electronic microscope (SEM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). All the results demonstrate that the isocyanate (−NCO) group in PUEP is successfully reacted with the –OH groups at both sides of the PLA and the obtained polyurethane (PU)~PLA copolymer (PU ~ cõ PLA) significantly improves the interfacial compatibility of PLA/TPU blends. The gradually refined dispersed phase size and fuzzy phase interface as displayed in SEM images suggest a good interfacial compatibilization in the PLA/TPU/PUEP blends, probably due to the isocyanate reaction between PLA and PUEP. And the interfacial reaction and compatibilization among the components led to the formation of super toughened PLA/TPU/PUEP blends. And the instrumented impact results indicate that most of the impact toughness is provided by the crack propagation rather than the crack initiation during the entire fracture process.     

Synthesis of two A-B-C type conjugated amphiphilic triblock fullerene derivatives and their application in organic solar cells

Two A-B-C type conjugated amphiphilic triblock fullerene derivatives C60-2 HMTPB and C60-2 EHTPB were obtained in multi steps synthesis with three different blocks,and the amphiphilic diblock molecular C60-4 TPB was also preferred as a reference.When as modifying layer on zinc oxide(ZnO),the three fullerene derivatives can all reduce the work function of ZnO via modulation of the interfacial dipoles and lead a better electrical coupling.As introducing treatment of toluene,the obvious self-assembly of fullerene derivatives were observed,which were supported by X-ray diffraction and contact angle of water measurement.Base on PTB7-Th:PC71 BM system,the inverted organic solar cells devices with structure of ITO/ZnO/fullerene derivatives/PTB7-Th:PC71BM/Mo03/Al got power conversion efficiencies of 8.62%,8.83%and 9.00%for C60-4 TPB,C60-2 HMTPB and C60-2 EHTPB,respectively,compared 8.13%of devices with bare ZnO.The result of conjugated amphiphilic triblock fullerene derivatives provides a straightforward approaching by simultaneously modulating the morphology and interfacial work function of ZnO,which can also lead high performance in optoelectronic devices.     

聚合物锂离子电池界面相容性的研究进展

聚合物锂离子电池作为储能装置在电子产品中具有广泛的应用前景。电极/聚合物电解质(E/P)界面相容性是影响聚合物锂离子电池电导率、安全性、机械性能的重要影响因素之一。研究E/P界面的电化学反应及形成机理,是解决相容性问题的关键。本文综述了近年来有关聚合物锂离子电池E/P界面相容性及相关研究技术的进展,并对聚合物锂离子电池界面相容性的相关研究进行了展望。     

Direct diazotization of graphite nanoplatelets with melamine and their favorable application in epoxy resins

The ease of undesirable agglomeration and a low efficiency are two problems that restrict the application of graphite nanoplatelets (GNPs) in epoxy resins (EP). Herein, a new strategy with melamine (MEL) as the precursor to functionalize GNPs chemically, which form a bonding layer that is compatible with epoxy matrix, is reported. The MEL fragments with secondary amine groups were grafted uniformly on the GNPs surface by covalent junctions to exploit the diazonium chemistry. This behavior led to a better dispersion and a stronger interaction with the epoxy matrix and resulted in an enhanced glass transition temperature and bending strength, compared with the pure EP. When only 1 wt% functionalized GNPs (f‐GNPs) was used, the Tg of the modified EP raised of about 15°C compared with pure EP, and the bending strength increased by approximately 39%. The dielectric constant of the EP with f‐GNPs was impacted slightly, and the dielectric loss decreased. At 10⁵ Hz, the dielectric loss of the EP with 1 wt% f‐GNPs decreased by approximately 11% compared with pure EP. Therefore, diazotization modification of the GNPs is a useful approach to improve the compatibility in nanoparticle networks.     

Design of aluminum trihydroxide and P‐N core‐shell structures and their synergistic effects on halogen‐free flame‐retardant polyethylene composites

In order to improve the performance of inorganic/organic composites, aluminum trihydroxide (ATH) core composites with a styrene‐ethylene‐butadiene‐styrene block copolymer grafted with maleic anhydride (MAH‐g‐SEBS) shell phase, and P‐N flame retardant as a synergistic agent, were prepared through an interface design. The effects of polyethylene glycol (PEG) content on the interfacial interaction, flame retardancy, thermal properties, and mechanical properties of high‐density polyethylene (HDPE)/ATH composites were investigated by small angle X‐ray diffraction, rotational rheometer, limiting oxygen index, thermogravimetric analysis (TGA), and tensile testing. The ATH synergistic effects of P‐N flame‐retardant improved the combustion performance of HDPE/ATH/PEG(3%)/MAH‐g‐SEBS/P‐N (abbreviated as HDPE/MH3/M‐g‐S/P‐N) composite by forming more carbon layer, increased the elongation at break from 21% to 558% compared to HDPE/ATH, and increased the interface thickness from 0.447 to 0.891 nm. SEM results support the compatibility of ATH with HDPE increased and the interfacial effect was enhanced. TGA showed the maximum decomposition temperature of the two stages and the yield of the residue at high temperature increased first and then decreased with the increase of PEG content. Rheological behavior showed the storage modulus, complex viscosity, and the relaxation time initially increased and then decreased with the increase of PEG content indicating PEG, M‐g‐S, and ATH powder gradually formed a partial coating, then a full coating, and finally an over‐coated core‐shell structured model.